Safety of Type Steel Frames Under Load Cycles
Publication: Journal of Structural Engineering
Volume 113, Issue 7
Abstract
The paper explores the safety of unbraced steel building frames designed according to AISC Type 2 construction under cyclic loadings. The study proceeds in the following steps: The probability of occurrence of live‐wind load cycles of various intensities to be expected during the lifetime of the structure is computed. A series of Type 2 frames is designed, following AISC specifications and common office practice. These frames are analyzed for behavior and strength under load cycles, using a previously developed nonlinear analysis program. Comparing expected cyclic load intensities and predicted frame resistances, it is concluded that these frames have ample safety against the liveand wind‐load cycles to be expected during the lifetime of the structure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bowker, A. H., and Lieberman, G. J., Engineering Statistics, 2nd ed., Prentice‐Hall, Inc., Englewood Cliffs, N.J., 1972.
2.
Cook, N. E., “Strength and Stiffness of Type 2 Steel Frames,” thesis presented to the University of Colorado, at Boulder, Colo., in 1983, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
3.
Cook, N. E., and Gerstle, K. H., “Safety of Type 2 Steel Frames,” Journal of Structural Engineering, ASCE, Vol. 113, No. 7, Jul., 1987, pp. 1456–1467.
4.
Culver, C., “Survey Results for Fire Loads and Live Loads in Office Buildings,” N.B.S. Building Science Series 85, National Bureau of Standards, Washington, D.C., 1976.
5.
Hodge, P. G., Plastic Analysis of Structures, McGraw‐Hill, New York, N.Y., 1959.
6.
Massonet, C. E., and Save, M. A., Plastic Analysis and Design, Vol. 1, Blaisdell Publishing Co., New York, N.Y., 1965.
7.
“Minimum Design Loads in Buildings and Other Structures,” ANSI A58.3, American National Standards Institute, New York, N.Y., 1972.
8.
Ravindra, M. K., and Galambos, T. V., “Load and Resistance Factor Design for Steel,” Journal of the Structural Division, ASCE, Vol. 104, No. 9, Sep., 1978, pp. 1337–1354.
9.
Specifications, Manual of Steel Construction, 8th ed., American Institute of Steel Construction, Chicago, Ill., 1980.
10.
Stelmack, T. W., Marley, M. J., and Gerstle, K. H., “Analysis and Tests of Flexibly‐Connected Steel Frames,” Journal of Structural Engineering, ASCE, Vol. 112, No. 7, Jul., 1986, pp. 1573–1588.
11.
Thom, H. C. S., “New Distributions of Extreme Winds in the United States,” Journal of Structural Division, ASCE, Vol. 94, No. 7, Jul., 1968, pp. 1787–1802.
12.
Type 2 Construction with Wind Moment Connections: A Return to Simplicity,” American Iron and Steel Institute, Washington, D.C., 1976.
13.
Uniform Building Code, International Conference of Building Officials, Pasadena, Calif., 1967.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Jul 1, 1987
Published in print: Jul 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.