Plate‐Bending Analysis Using Finite Strip‐Elements
Publication: Journal of Structural Engineering
Volume 113, Issue 6
Abstract
Displacement functions used for simply supported finite strips are combined with those of a rectangular plate‐bending element. The resulting finite strip‐element combines a number of advantages of both finite strips and finite elements. Owing to orthogonality relationships of the trigonometric functions used in the formulation, partial uncoupling of the equations occurs, enabling any number of sine series terms to be taken without increasing computer storage requirements. The free edge condition is approximately satisfied as a natural boundary condition, while the clamped edge condition is exactly satisfied using Lagrange multipliers. Three examples are considered demonstrating the accuracy and efficiency of the method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bogner, F. K., Fox, R. L., and Schmit, L. A. (1965). “The generation of interelement compatible stiffness and mass matrices by the use of interpolation formulae.” Proc. Conf. on Matrix Methods in Struct. Mech., Wright Patterson Air Force Base, Ohio, 397–443.
2.
Cheung, Y. K. (1968a). “Finite strip method in the analysis of elastic plates with two opposite simply supported ends.” Proc. Inst. of Civ. Engrs., 40(5), May, 1–7.
3.
Cheung, Y. K. (1968b). “Finite strip method analysis of elastic slabs.” J. Engrg. Mech. Div., ASCE, 94(6), Jun., 1365–1378.
4.
Cheung, Y. K. (1976). Finite strip method in structural analysis, Pergamon Press, Oxford, England.
5.
Cheung, Y. K., and Cheung, M. S. (1971). “Flexural vibrations of rectangular and other polygonal plates.” J. Engrg. Mech. Div., ASCE, 97(2), Feb., 391–411.
6.
Golley, B. W., and Petrolito, J. (1984). “Method for analysing tanks and continuous plates.” Comps. and Struct, 18(6), Jun., 1141–1151.
7.
Huang, M. K., and Conway, H. D. (1952). “Bending of a uniformly loaded rectangular plate with two adjacent edges clamped and the others either simply supported or free.” J. Appl. Mech., ASME, 14(52), Dec., 451–460.
8.
Jofriet, J. C. (1975). “Design of rectangular concrete tank walls.” Proc. Amer. Concrete Inst. J. 72(7), Jul., 329–332.
9.
Rectangular Concrete Tanks. (1969). Information sheet No. IS003.02D. Portland Cement Assoc., Skokie, Ill.
10.
Timoshenko, S. P., and Woinowsky‐Krieger, S. (1959). Theory of plates and shells, 2nd ed. McGraw‐Hill Book Co. Inc., New York, N.Y.
11.
Wang, H., and Zhang, J. (1986). “The finite strip‐element method.” Proc. Int. Conf. Comput. Mech., Springer‐Verlag, Tokyo, Japan, I‐151—I–156.
12.
Zienkiewicz, O. C. (1977). The finite element method. McGraw‐Hill Book Co. Limited, London, U.K.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Jun 1, 1987
Published in print: Jun 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.