Temperature Distribution in Composite Bridges
Publication: Journal of Structural Engineering
Volume 113, Issue 3
Abstract
Thermal stresses in composite concrete deck slab‐on‐steel beam bridges can be significant in comparison to dead or live load stresses. Specifications by AASHTO do not provide guidance for the vertical temperature distribution through the depth of the composite bridge, while the Ontario Highway Bridge Design Code does require the designer to account for the effects of temperature differentials, but is deficient in several aspects. Based on a synthesis of several theoretical and experimental studies on prototype bridges, a simple but realistic vertical temperature distribution through the section depth is proposed. Maximum and minimum values of temperature differentials, consistent with observed field measurements, are also presented. The proposed distribution is linear through the depth of the slab and uniform through the depth of the steel beam. This distribution also leads to simple formulas to estimate the thermal stresses in simple and continuous composite bridges.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Berwanger, C. (1970). “Thermal stresses in composite bridges.” Proceedings. ASCE Specialty Conference on Steel Structures, Engineering Extension Series, No. 15, University of Missouri‐Columbia, Columbia, Mo., 27–36.
2.
Berwanger, C. (1971). “The modulus of concrete and coefficient of expansion of concrete and reinforced concrete at below normal temperatures.” Special Publication SP‐25, ACI, Paper SP 25–8.
3.
Emanuel, J. H., and Hulsey, J. L. (1978). “Temperature in composite bridges.” Journal of the Structural Division, ASCE, 104(1), 65–78.
4.
Hendry, A. W., and Page, J. K. (1960). “Thermal movements and stresses in concrete slabs in relation to tropical conditions.” RILEM Symposium on Concrete and R. C. in Hot Countries, Haifa, Israel, 11–12.
5.
McClure, R. M., West, H. H., and Hoffman, P. C. (1984). “Observations from tests on a segmental bridge.” 2nd Bridge Engineering Conference, Transportation Research Record, 950. 2, National Research Council, Minneapolis, Minn.
6.
Naruoka, M. H., and Yamaguti, T. (1957). “The measurement of the temperature of the interior of the reinforced concrete slab of the Shigita Bridge and presumption of thermal stresses.” Proceedings. Symposium on the Stress Measurements for Bridge and Structure, Japanese Society for Promotion of Science, Tokyo, Japan, 109–115.
7.
“Ontario Highway Bridge Design Code” (1983). Ministry of Transportation and Communications, Ontario, Canada.
8.
Priestley, M. N. (1978). “Design of concrete bridges for temperature gradients.” ACI Journal. 209–217.
9.
Radolli, M., and Green, R. (1975). “Thermal stresses in concrete bridge superstructures under summer conditions.” Transportation Research Record 547. National Research Council, Washington, D.C., 23–36.
10.
Roik, K., and Haensel, J. H. (1984). “Composite bridge design in Germany.” Proceedings. ASCE, U.S.‐Japan Joint Seminar on Composite Construction, held at Seattle, Wash.
11.
Soliman, M. H. (1985). “Long‐term losses in prestress and thermal effect in composite steel‐concrete structures with prestressed decks.” Thesis presented to the University of Windsor, at Windsor, Ontario, Canada, in partial fulfillment of the requirements for the degree of Master of Science.
12.
Soliman, M. H., and Kennedy, J. B. (1986). “Simplified method for estimating thermal stresses in composite bridges.” Transportation Research Record. TRB 1072, National Research Council, Washington, D.C., pp.
13.
“Standard Specifications for Highway Bridges.” (1983). 13th ed. American Association of State Highway Officials, Washington, D.C.
14.
“Steel, Concrete, and Composite Bridges—Part I: General Statement.” (1978). British Standard BS 5400. British Standards Institution, Crowthorne, Berkshire, England, U.K.
15.
Zuk, W. (1965). “Thermal behaviour of composite bridges—insulated and uninsulated.” Highway Research Record. T6.
16.
Zuk, W. (1965). “Simplified design check of thermal stresses in composite highway bridges.” Highway Research Record. 103.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Mar 1, 1987
Published in print: Mar 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.