Optimum Design of Horizontally Curved R/C Slabs
Publication: Journal of Structural Engineering
Volume 113, Issue 11
Abstract
A method for selecting the optimum design variables in the design of horizontally curved two‐way reinforced concrete floor slabs is presented. The slab panels are assumed to be uniformly loaded by characteristic dead and live load and supported on all sides by rigid boundary supports. The optimum values are selected from within the feasible region in the design space defined by the limit state requirements of CP 110 (British Standard Code). Cost of material is treated as the objective function and is optimized subject to the bending behavior and side constraints imposed by the limit‐state requirements. For the ultimate limit‐state analysis, the bending moments in the curved slab panels are determined from the linear‐elastic theory of sector plates. Nonlinear programming problems of high degree are generated by setting the effective depth and the transformed steel ratios as the design variables in both the objective function and the constraints. The sequential linear programming is introduced as an analytical method of nonlinear optimization. The optimum design variables are then determined.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, A. H. (1974). “Reinforced concrete design to CP 110—simply explained,” Cement and Concrete Association, London, England.
2.
Beale, E. M. L. (1967). “Numerical Methods.” Non‐Linear Programming, J. Abadie, ed., North‐Holland, 97–131.
3.
British Standards Institution. (1980). “The structural use of concrete.” CP 110, Part 1, British Standards Inst., London, England.
4.
Griffth, R. E., and Stewart, R. A. (1961). “A nonlinear programming technique for the optimization of continuous processing systems.” Management Science, 7, 379–392.
5.
Gunaratnam, D. J., and Sivakumaran, N. S. (1978). “Optimum design of reinforced concrete slabs.” Struct. Eng., 56B(3), 61–67.
6.
Hamouche, V. S., and Harik, I. E. (1985). “Analysis and design of circular girder floor slabs.” Civil Engineering Research Report, No. UKCE8502, University of Kentucky, Lexington, Ky. March 1985.
7.
Harik, I. E. (1982). “Bending of transversally loaded orthotropic rectangular and sector plates,” thesis submitted to Wayne State University, at Detroit, Mich., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
8.
Harik, I. E. (1984). “Analytical solution to orthotropic sector.” J. Engrg. Mech., ASCE, 110(4), 554–568.
9.
Harik, I. E., and Hamouche, V. S. (1986). “Transversally loaded horizontally curved R/C slabs.” J. Struct. Engrg., ASCE, 112(1), 105–118.
10.
Kellog, H. J. (1960). “The cutting plane method for solving complex programs.” SIAM J., 8, 703–712.
11.
Morley, C. T. (1966). “The minimum reinforcement of concrete slabs.” Int. J. Mech. Sci., 8(4), 305–310.
12.
Moses, F. (1964). “Optimum structural design using linear programming.” J. Struct. Div. ASCE, 90, (ST6), 88–104.
13.
Pannel, F. N. (1966). “Economical distribution of reinforcement in rectangular slabs.” Concrete Constr. Engrg., 8(4), 305–311.
14.
Park, M. H. (1984). “Optimal limit state design of reinforced concrete flat slab‐column structures.” Proc. Korean Soc. of Civil Engineers, 4(1), 11–26.
15.
Reinschmidt, K., Cornell, C. A., and Brotchie, J. F. (1966). “Iterative design and structural optimization.” J. Struct. Div. ASCE, 92 (ST6), 281–318.
16.
Rozvany, G. I. N., and Donald, E. C. (1966). “The minimum volume of uncurtailed orthogonal reinforcement in simply supported reinforced plates.” Concrete Constr. Rev., 61(8), 281–285.
17.
Thakkar, M. C., and Sridhar Rao, J. K. (1970). “Minimum reinforcement in clamped square slabs.” J. Struct. Div., ASCE, 96 (ST3), 751–757.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Nov 1, 1987
Published in print: Nov 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.