Reliability of Random Structural Systems and Load Space Reduction
Publication: Journal of Structural Engineering
Volume 113, Issue 10
Abstract
The reliability of redundant structural systems is computed in load space. The limit state curve is determined using a nonlinear structural analysis program, and system reliability is evaluated as load vectors are simulated and identified as being in the safe or unsafe region. For the case of random strength variables, a distribution function is associated with the limit state curve. Structures are examined as load space dimension is reduced from seven to either two or three. It is shown that a three‐dimensional load space formulation has the potential to provide a reasonable approximation of system reliability of structural systems.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Corotis, R. B., and Soltani, M. (1985). “Structural system reliability; limit states and modal consequences.” 4th Int. Conf. on Struct. Safety and Reliability, Kobe, Japan, 1107–116.
2.
Ellingwood, B. R., et al. (1980). “Development of a probability based load criterion for American national standard A58.” Nat. Bur. of Standards Special Pub. 577, Washington, D.C.
3.
Gorman, R. M., and Moses F. (1979). “Reliability of structural systems.” Rep. No. 79‐2, Case Western Reserve Univ., Cleveland, Ohio.
4.
Grimmelt, M. J., and Schueller, G. I. (1982). “Benchmark study on methods to determine collapse failure probabilities of redundant structures.” Struct. Safety, 1, Mar., 93–106.
5.
Kam, T. Y., Corotis, R. B., and Rossow, E. C. (1983). “Reliability of nonlinear framed structures.” J. Struct. Engrg., ASCE, 109(7), Jul., 1585–1601.
6.
Kam, T. Y., Rossow, E. C., and Corotis, R. B. (1983). “Inelastic tangential stiffness for 2‐D frames.” J. Struct. Engrg., ASCE, 109(11), Nov., 2685–2697.
7.
Lin, T. S. (1984). “Load space formulation of reliability for nonlinear random structural systems.” Thesis presented to the Johns Hopkins University, in Baltimore, Md., in partial fulfillment of the requirement for the degree of Doctor of Philosophy.
8.
Lin, T. S., and Corotis, R. B. (1985). “Reliability of ductile systems with random strengths.” J. Struct. Engrg., ASCE, 111(6), Jun., 1306–1325.
9.
Ma, H. F., and Ang, A. H. (1981). “Reliability analysis of redundant ductile structural systems.” Struct. Res. Ser. No. 494, Civ. Engrg. Stud., University of Illinois, Urbana, Ill.
10.
Minimum design loads for buildings and other structures. (1982). Amer. Natl. Standards Inst., ANSI A58.1, New York, N.Y.
11.
Moses, F. (1982). “Structural reliability developments in structural engineering.” Struct., safety, Elsevier Scientific Publishing Co., Amsterdam, The Netherlands, 1, 3–13.
12.
Rashedi, M. R., and Moses, F. (1983). “Studies on reliability of structural systems.” Rep. No. R 83‐3, Dept. of Civ. Engrg. Case Western Reserve Univ., Cleveland, Ohio.
13.
Thoft‐Christensen, P., and Baker, M. J. (1982). Structural reliability theory and its applications. Springer‐Verlag, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Oct 1, 1987
Published in print: Oct 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.