Stiffness Analysis of Thin‐Walled Girders
Publication: Journal of Structural Engineering
Volume 112, Issue 6
Abstract
For complex arrangements of thin‐walled girders a generalized method of analysis is required that is suitable for rapid solution by computer. A method of elastic analysis based on a stiffness approach, is proposed which is equally applicable to straight and curved girders of thin‐walled cross section. For straight girders, the member stiffness matrix is derived explicitly by inverting the appropriate member flexibility matrix and considering equilibrium of the member ends. The member stiffness matrix for curved girders is obtained by the same method but in numerical form due to the extreme complexity of the various terms. By transforming individual member stiffness matrices into system co‐ordinates, a system stiffness matrix is established, whose inversion leads directly to a global solution for the structure. In this type of analysis uniformly distributed flexural and torsional loads must be applied as fixed‐ends loads at the nodes. These are derived for both straight and curved girders. In addition, the distribution of bimoment is presented graphically for a variety of typical beam cross sections.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Dabrowski, R., “Curved Thin‐Walled Girders—Theory and Analysis,” Cement and Concrete Association, Translation 61.144, 1972.
2.
Heidebrecht, A. C., and Swift, R. D., “Analysis of Asymmetrical Coupled Shear Walls,” Proceedings, Journal of the Structural Division, ASCE, ST5, May, 1971, pp. 1407–1422.
3.
Khan, A. H., and Tottenham, H., “The Method of Bimoment Distribution for the Analysis of Continuous Thin‐Walled Structures Subject to Torsion,” Proceedings, Institution of Civil Engineers, Part 2, No. 63, Dec., 1977, pp. 843–863.
4.
Konishi, I., and Komatsu, S., “Three‐Dimensional Analysis of Curved Girders with Thin‐Walled Cross Section,” International Association of Bridge and Structural Engineering, Vol. 25, 1965, pp. 143–203.
5.
Krajcinovic, D., “A Consistent Discrete Elements Technique for Thin‐Walled Assemblages,” International Journal for Solids and Structures, 1969, Vol. 5, No. 7, 639–662.
6.
Livesley, R. K., Matrix Methods of Structural Analysis, Pergamon Press, London, England, 1964.
7.
Mallick, D. V., and Dungar, R., “Dynamic Characteristics of Core Wall Structures Subjected to Torsion and Bending,” The Structural Engineer, Vol. 55, No. 6, June, 1977, pp. 251–261.
8.
Pippard, A. J. S., and Baker, J. F., Analysis of Engineering Structures, Edward Arnold, London, England, 1968.
9.
Reilly, R. J., “Stiffness analysis of grids including warping,” Journal of the Structural Division, ASCE, ST7, July, 1972, pp. 1511–1523.
10.
Sawko, F., “Computer Analysis of Grillages Curved in Plan,” International Association of Bridge and Structural Engineering, Vol. 27, 1967, pp. 151–169.
11.
Stafford Smith, B., and Taranath, B. S., “The Analysis of Tall Core‐Supported Structures Subject to Torsion,” Proceedings, Institution of Civil Engineers, Part 2, No. 53, Sept., 1972, pp. 173–187.
12.
Takaba, N., and Naruoka, M., “An Analysis of Grillage Girder Bridges with Thin‐Walled Cross Section by the Deformation Method,” Transactions, Japanese Society of Civil Engineers, Vol. 2, Part 1, 1970, pp. 135–142.
13.
Tezcan, S. S., and Ovunc, B., “Analysis of Plane and Space Frameworks with Curved Members,” International Association of Bridge and Structural Engineering, Vol. 25, 1965, pp. 339–352.
14.
Vlasov, V. Z., “Thin‐Walled Elastic Beams,” National Science Foundation, Washington, D.C., 1961.
15.
Waldron, P., “Elastic Analysis of Curved Thin‐Walled Girders Including the Effects of Warping Restraint,” Engineering Structures, Vol. 7, Apr., 1985, pp. 93–104.
16.
Waldron, P., “The Analysis of Concrete Structures Including the Effects of Warping Restraint,” thesis, presented to the University of London, at London, England, in 1979, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Jun 1, 1986
Published in print: Jun 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.