Dynamics of Steel Elevated Guideways—An Overview
Publication: Journal of Structural Engineering
Volume 111, Issue 9
Abstract
The most significant advances over the last 15 years relative to the dynamic problems of aerial guideways are summarized. Emphasized are guideways with steel supporting flexural members, designed for the exclusive right‐of‐way of a particular type of vehicle: Steel wheel‐on‐rail, rubber tire or airlevitated. Nondimensional parameters characterizing guideway‐vehicle interactions are catalogued and related to recent designs and current design practice. The role of structural dynamic analysis and the need for further research in the control of both passenger ride quality and airborne noise radiating from elevated guideways are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“AGT Guideway and Station Technology,” Report No. UMTA‐IT‐06‐0152‐79, 8 Vols., U.S. Department of Transportation, 1978–79.
2.
Akay, A., “Vibration, Damping, and Acoustic Radiation Due to Transient Excitation of Structures,” Paper No. 81‐WA‐NCA‐9, American Society of Mechanical Engineers.
3.
Anderson, J. E., Transit Systems Theory, D. C. Heath and Co., Lexington, Mass., 1978.
4.
Benedetti, G. A., “Dynamic Stability of a Beam Loaded by a Sequence of Moving Mass Particles,” Journal of Applied Mechanics, Vol. 41, 1974.
5.
Biggers, S. B., and Wilson, J. F., “Dynamic Interactions of High Speed Tracked Air Cushion Vehicles with their Guideways, Part I,” Journal of Dynamic Systems, Measurement and Control, Vol. 95, March, 1973.
6.
Biggs, J. M., Introduction to Structural Dynamics, McGraw‐Hill, Inc., New York, N.Y., 1964.
7.
Biggers, S. B., and Wilson, J. F., “Dynamic Interactions of High Speed Tracked Air Cushion Vehicles and Their Guideways,” Journal of Dynamic Systems Measurement, and Control, Vol. 95, March, 1973.
8.
Birkeland, P. W., “Investigation of Reduced Cost Guideway Designs for the Tracked Air Cushion Research Vehicle,” Report No. PRA‐ORD&D‐74‐55, U.S. Department of Transportation, Dec., 1972.
9.
Botsford, J. H., “Using Sound Levels to Gauge Human Response to Noise,” Sound and Vibration, Vol. 3, No. 10, Oct., 1969.
10.
Broek, D., Elementary Engineering Fracture Mechanics, Sijthoff and Noordoff, Alphen aan den Rijn, Netherlands, 1978.
11.
Butkunas, A. A., “Power Spectral Density and Ride Evaluation,” Sound and Vibration, Dec., 1967.
12.
Carstens, J. P., “Literature Survey of Passenger Comfort Limitations of High Speed Ground Transports,” Report No. PB‐168‐171, U.S. Department of Commerce, July, 1965.
13.
Culver, C. G., “Natural Frequencies of Horizontally Curved Beams,” Journal of the Structural Division, ASCE, April, 1967.
14.
Dey, S. S., and Balasubramanian, N., “Dynamic Response of Orthotropic Curved Bridge Decks to Moving Load,” Computers and Structures, Vol. 18, 1984.
15.
Ellis, J. R., “The Ride and Handling of Semi‐Trailer Articulated Vehicles,” Automobile Engineer (London), Dec., 1966.
16.
“Evaluation of Load Carrying Capacity of Bridges,” Road Research, Paris, France, Dec., 1979.
17.
Fearnsides, J., Hedrick, J. K., and Firouztash, H., “Specification of Ride Quality Criteria for Transportation Systems: The State‐of‐the‐Art and a New Approach,” High Speed Ground Transportation Journal, Vol. 8, 1974.
18.
Fertis, D. G., Dynamics and Vibration of Structures, John Wiley and Sons, Inc., New York, N.Y., 1973.
19.
Francis, D. T. I., Sadek, M. M., and Tobias, S. A., “Prediction of Acoustic Emission of Impact Forming Machines from Design Drawings,” Paper No. 81‐WA‐NCA‐5, American Society of Mechanical Engineers, 1981.
20.
Fryba, L., Vibration of Solids and Structures Under Moving Loads, Sijhoff & Noordhoff, Rockville, Md., 1973.
21.
Genin, J., and Ting, E. C., “Vehicle‐Guideway Interaction Problems,” Shock and Vibration Digest, Vol. 11, 1979.
22.
Genin, J., Ting, E. C., and Vafa, Z., “Curved Bridge Response to a Moving Load,” Journal of Sound and Vibration, Vol. 81, No. 4, 1982.
23.
“Guide for Evaluation of Human Exposure to Whole Body Vibration,” Draft International Standard ISO/DIS 2631, International Organization for Standardization, 1972, 1978.
24.
Gupta, R. K., “Dynamic Loading of Highway Bridges,” Journal of the Engineering Mechanics Division, ASCE, Vol. 106, April, 1980.
25.
Handbook of Urban Rail Noise and Vibration Control, Bolt Beranek and Newman, Cambridge, Mass., 1982.
26.
Harrington, B. W., Jr., “Investigation of Design Standards for Urban Rail Transit Elevated Structures,” Report No. UMTA‐GA‐06‐0010‐81‐1, U.S. Department of Transportation, June, 1981.
27.
Hedrick, J. K., Rayera, R. J., and Andres, J. R., “The Effect of Elevated Guideway Construction Tolerances on Vehicle Ride Quality,” Journal of Dynamic Systems, Measurement and Control, Vol. 97, 1975.
28.
Heins, C. P., “Steel Box Girder Specifications for Transit Structures,” ASCE, April, 1982 (preprint 82‐003).
29.
Heins, C. P., and Kurzweil, A. D., “Load Factor Design of Continuous Span Bridges,” ASCE, April, 1982 (preprint 2412).
30.
Heins, C. P., and Sahin, M. A., “Natural Frequency of Curved Box Girder Bridges,” Journal of the Structural Division, ASCE, Vol. 105, Dec., 1979.
31.
Hurst, C. J., and Nemergut, P. J., “Noise Level Prediction Using a Small Computer,” Paper No. 82‐WA‐NCA‐8, American Society of Mechanical Engineers, 1982.
32.
Joseph, T. P., and Wilson, J. F., “Vibrations of Curved Spans for Mass Transit,” Journal of the Engineering Mechanics Division, ASCE, Vol. 106, April, 1980.
33.
Kirschner, F., “Noise Control of Steel Aerial Structures,” American Iron and Steel Institute Project Report No. 5‐1207, Oct., 1976.
34.
Kolousek, V., Dynamics in Engineering Structures, Halsted Press, N.Y., 1973.
35.
Komatsu, S., and Nakai, H., “Study of Free Vibration of Curved Girder Bridge,” Transactions of the Japan Society of Civil Engineers, No. 136, Dec., 1966.
36.
Kurihara, M., and Shimogo, T., “Stability of a Simply‐Supported Beam Subjected to Randomly Spaced Moving Loads,” Paper No. 77‐DET‐78, American Society of Mechanical Engineers, Sept., 1977.
37.
Kurihara, M., and Shimogo, T., “Vibration of an Elastic Beam Subjected to Discrete Moving Loads,” Paper No. 77‐DET‐79, American Society of Mechanical Engineers, Sept., 1977.
38.
LeFevre, W. F., “The Highway Truck Ride Problem,” Paper No. SP‐260, Society of Automotive Engineers, Jan., 1965.
39.
Leibowitz, H., ed., Fracture: An Advanced Treatise, 7 Volumes, Academic Press, New York, N.Y., 1968.
40.
Leissa, A. W., “Vibration of Plates,” SP‐160, NASA, 1969.
41.
“Loads and Forces on Bridges,” ASCE, April, 1980 (preprint 80‐173).
42.
“Manual for Railway Engineering,” American Railway Engineering Association, 1977.
43.
Mezache, M., and Koopman, G. H., “Radiation Characteristics of a Slender Box‐Type Structure,” Paper No. 82‐WA/NCA‐9, American Society of Mechanical Engineers, 1982.
44.
Miner, M. A., “Cumulative Damage in Fatigue,” Journal of Applied Mechanics, Vol. 12, 1945.
45.
Minnetyan, L., Nelson, R. B., and Mingori, D. L., “Dynamics and Optimal Design of AGT System,” Journal of the Structural Division, ASCE, Vol. 106, No. ST4, April, 1980.
46.
Nakra, B. C., “Vibration Control with Viscoelastic Materials,” Shock and Vibration Digest, Vol. 8, No. 6, June, 1976.
47.
Nelson, F. C., “Techniques for the Design of Highly Damped Structures,” Shock and Vibration Digest, Vol. 9, No. 7, July, 1977.
48.
Ozguven, H. N., and Crowley, A., “Receptance of Nonproportionality and Continuously Damped Plates—Equivalent Damping Method,” Journal of Sound and Vibration, Vol. 76, No. 1, 1981.
49.
Panovko, Y. G., and Gubanova, I. I., Stability and Oscillations of Elastic Systems, Consultants Bureau Enterprises, Inc., New York, N.Y., 1965.
50.
Paris, P. C., and Sih, G. C., “Stress Analysis of Cracks,” STP 381, Symposium on Fracture Toughness Testing and Its Applications, American Society of Testing and Materials, 1965.
51.
Paul, I. L., and Bender, E. K., “Active Vibration Isolation and Active Vehicle Suspension,” Report No. PB‐173‐648, U.S. Department of Commerce, Nov., 1966.
52.
Pepler, R. D., Vallerie, L. L., Jacobson, I. D., Barber, R. W., and Richards, L. G., “Development of Techniques and Data for Evaluating Ride Quality, Volume 2: Ride Quality Research,” Report No. DOT‐TSC‐RSPD‐77‐1, II, U.S. Department of Transportation, Feb., 1980.
53.
“Quarterly Report of the Railway Technical Research Institute,” Japanese National Railway, Aug., 1964.
54.
Richardson, H. H., “Transportation Vehicle/Beam‐Elevated Guideway Dynamic Interactions: A State‐of‐the‐Art‐Review,” Journal of Dynamic Systems, Measurement, and Control, Vol. 96, June, 1974.
55.
Richards, L. G., Jacobson, I. D., and Pepler, R. D., “Ride‐Quality Models for Diverse Transportation Systems,” Transportation Research Record 774, 1980.
56.
Rolfe, S. T., and Barson, J. M., Fracture and Fatigue Control in Structures: Application of Fracture Mechanics, Prentice‐Hall, Inc., Englewood Cliffs, N.J., 1977.
57.
Saha, P., “Power Transformer Noise Generation, Propagation and Control—A Review,” Paper No. 81‐WA/NCA‐3, American Society of Mechanical Engineers, 1981.
58.
Schmitz, M. A., and Simons, A. K., “Man's Response to Low‐Frequency Vibration,” Paper No. 59‐A‐200, American Society of Mechanical Engineers, Nov., 1959.
59.
Schultz, T. J., “Noise Rating Criteria for Elevated Rapid Transit Structures,” U.S. Department of Transportation Report No. UMTA‐MA‐60‐0099‐79‐3, March, 1980.
60.
Seybert, A. F., Soenarko, B., Rizzo, F. J., and Shippy, D. J., “Application of the BIE Method to Sound Radiation Problems Using an Isoparametric Element,” Paper No. 82‐WA/NCA‐1, American Society of Mechanical Engineers, 1982.
61.
Smith, C. C., Gilchrist, A. J., and Wormley, D. N., “Multiple and Continuous Span Elevated Guideway‐Vehicle Dynamic Performance,” Journal of Dynamic Systems, Measurement and Control, Vol. 97, 1975.
62.
Snyder, J. E., Wormley, D. N., and Richardson, H. H., “Automated Guideway Transit Systems Vehicle‐Elevated Guideway Dynamics: Multiple Vehicle Single Span Systems,” Report No. UMTA‐11‐0023‐75‐1, U.S. Department of Transportation, Oct., 1975.
63.
“Standard Specifications for Highway Bridges,” 12th Ed., American Association of State Highway and Transportation Officials (AASHTO), 1977.
64.
“Steel Structures for Mass Transit,” American Iron and Steel Institute, 1976.
65.
Stokes, G. G., “Discussion of a Differential Equation Relating the Breaking of Railway Bridges (1849),” Mathematics and Physics Papers, Vol, 2, 1883.
66.
Strickland, L. R., “Automated Guideway Transit Technology Overview,” Report No. UMTA‐VA‐06‐0041‐78‐1, U.S. Department of Transportation, Feb., 1978.
67.
Sung, S. H., “A Finite Element Procedure for Studying the Acoustic Radiation of a Vibrating Plate,” Paper No. 82‐WA/NCA‐3, American Society of Mechanical Engineers, 1982.
68.
Tan, C. P., and Shore, S., “Dynamic Response of a Horizontally Curved Bridge,” Journal of the Structural Division, ASCE, Vol. 94, No. ST3, March, 1968.
69.
Tan, C. P., and Shore, S., “Response of Horizontally Curved Bridge to Moving Load,” Journal of the Structural Division, ASCE, Vol. 94, No. ST9, Sept., 1968.
70.
Ting, E. C., Genin, J., and Ginsberg, J. H., “A General Algorithm of the Moving Mass Problem,” Journal of Sound and Vibration, Vol. 33, 1974.
71.
Ting, E. C., Genin, J., and Ginsberg, J. H., “Dynamic Interaction of Bridge Structures and Vehicles,” Shock and Vibration Digest, Vol. 7, 1975.
72.
Towers, D. A., “Noise Impact Inventory of Elevated Structures in U.S. Urban Rail Rapid Transit Systems,” Report No. UMTA‐MA‐06‐0099‐80‐5, U.S. Department of Transportation, Sept., 1981.
73.
Ungar, E. E., “Design Considerations for Retrofit Quieting of Elevated Rail Transit Structures with Open Wood‐Tie Decks on Steel Stringers,” Bolt Beranek and Newman Report No. 4818, Oct., 1981.
74.
Ungar, E. E., and Wittig, L. E., “Wayside Noise of Elevated Rail Transit Structures: Analysis of Published Data and Supplementary Measurements,” Report No. UMTA‐MA‐06‐0099‐080‐6, U.S. Department of Transportation, Dec., 1980.
75.
“Urban Rail Noise Abatement Program Digest, Report No. UMTA‐MA‐06‐0099‐80‐3, U.S. Department of Transportation, July 1, 1981.
76.
Vlasov, V. Z., “Thin‐Walled Beam Theory,” National Science Foundation, Washington, D.C., 1961.
77.
Walter, W. D., Gossard, D., and Fensel, P., “Truck Ride: A Mathematical and Empmcal Study,” Paper No. 690099, Society of Automotive Engineers, January, 1969.
78.
Wilson, J. F., “Dynamic Deflections of Multiple‐Span Guideways Under High Speed, Air Cushion Vehicles,” Shock and Vibration Bulletin, Vol. 41, Dec., 1970.
79.
Wilson, J. F., “Dynamic Response of Beams to Moving Pressure Loads as Related to Tracked Air Cushion Vehicles,” Shock and Vibration Bulletin, Vol. 40, 1969.
80.
Wilson, J. F., “Dynamic Theories and Experiments of Alternative Guideway‐Vehicle Systems, Part II,” Report No. DOT‐OS‐60130, U.S. Department of Transportation, March, 1979.
81.
Wilson, J. F., “Model Experiments for Span‐Vehicle Dynamics,” Journal of the Engineering Mechanics Division, ASCE, Vol. 103, No. EM8, Aug., 1977.
82.
Wilson, J. F., “Optimal Design Methodology for Elevated Transit Structures,” Report No. UMTA‐NC‐0010‐81‐2, U.S. Department of Transportation, Oct., 1981.
83.
Wilson, J. F., “Response of Simple Spans to Moving Mass Loads,” American Institute of Aeronautics and Astronautics Journal, Vol. 11, Jan., 1973.
84.
Wilson, J. F., and Barbas, S. T., “Dynamics of Near‐Optimal Spans with Moving Loads,” Journal of Advanced Transportation, Vol. 16, 1982.
85.
Wilson, J. F., and Barbas, S. T., “Response of Continuous, Elastically Supported Beam Guideways to Transit Loads,” Journal of Dynamic Systems, Measurement and Control, Vol. 102, 1980.
86.
Wilson, J. F., and Biggers, S. B., “Dynamic Interactions Between Long, High Speed Trains of Air Cushion Vehicles and Their Guideways,” Journal of Dynamic Systems, Measurement and Control, Vol. 93, March, 1971.
87.
Wilson, J. F., and Garg, D. P., “Frequencies of Annular Plate and Curved Beam Elements,” American Institute of Aeronautics and Astronautics Journal, Vol. 17, March, 1978.
88.
Wilson, J. F., and Wilson, D. M., “Responses of Continuous, Inerrialess Beams to Traversing Mass—A Generalization of Stokes Problem,” International Journal of Mechanical Sciences, Vol. 26, 1984.
89.
Wormley, D. N., Hedrick, J. K., Eglitis, L., and Costanza, D., “Elevated Guideway Cost‐Ride Quality Studies for Group Rapid Transit Systems,” Report DOT‐TSC‐OST‐77‐55, U.S. Department of Transportation, Aug., 1978.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Sep 1, 1985
Published in print: Sep 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.