Curved Bridge Decks: Analytical Strip Solution
Publication: Journal of Structural Engineering
Volume 111, Issue 7
Abstract
An “exact” solution is presented for the analysis of orthotropic curved bridge decks subjected to patch, uniform, line and concentrated loads. The bridge deck is idealized as an assemblage of radially supported curved plate elements or strips. The deflection of each plate strip is expressed as a Levy type Fourier series and the loads are expressed as a corresponding series. Concentrated loads and line loads in the tangential direction are incorporated in the solution as a discontinuity in the shear force along the load line. The convergence of this procedure is achieved by increasing the number of modes rather than the number of elements. The solution has the advantage over purely numerical or seminumerical techniques, using grid analogy or finite element techniques, in that the computational difficulties do not increase as the number of terms is increased to give increased accuracy. Tabular and graphical results are presented for bridge decks subjected to various loading conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barve, V. D., and Dey, S. S., “Isoparametric Finite Difference Energy Method for Plate Bending Problems,” Computers and Structures, Vol. 17, No. 3, 1983, pp. 459–465.
2.
Bell, L. C., and Heins, C. P., “The Solution of Curved Bridge Systems Using the Slope‐Deflection Fourier Series Method,” Civil Engineering Report No. 19, University of Maryland, College Park, Md., June, 1968.
3.
Benson, P. R., and Hinton, E., “A Thick Finite Strip Solution for Static, Free Vibration and Stability Problems,” International Journal for Numerical Methods in Engineering, Vol. 10, 1976, pp. 665–678.
4.
Buchacek, K., “Statics of an Orthotropic Plate in the Form of a Sector of an Annulus,” Acta Technica, C.S.A.V., Vol. 18, No. 3, 1973, pp. 242–265.
5.
Cheung, Y. K., “The Analysis of Cylindrical Orthotropic Curved Bridge Decks,” International Association for Bridges and Structural Engineering, Vol. 29, No. 2, 1969, pp. 41–51.
6.
Cheung, Y. K., King, I. P., and Zienkiewicz, O. C., “Slab Bridges with Arbitrary Shape and Support Conditions: A General Method of Analysis Based on Finite Elements,” Proceedings, Institution of Civil Engineers, Vol. 40, May, 1968, pp. 9–36.
7.
Coull, A., and Das, P. C., “Analysis of Curved Bridge Decks,” Proceedings, Institution of Civil Engineers, Vol. 37, May, 1967, pp. 75–85.
8.
Coull, A., and Ergin, A. S., “Analysis of Bridge Slabs Curved in Plan,” Civil Engineering and Public Works Review, Vol. 60, Dec., 1965, pp. 1745–1749.
9.
Cusens, A. R., and Pama, R. P., Bridge Deck Analysis, John Wiley and Sons, London, Great Britain, 1975.
10.
Dey, S. S., and Samuel, A. T., “Static Analysis of Orthotropic Curved Bridge Decks,” Computers and Structures, Vol. 12, No. 2, Aug., 1980, pp. 161–166.
11.
Dey, S. S., “Finite Strip Method of Analysis for Orthotropic Curved Bridge Decks,” Proceedings, Institution of Civil Engineers, Part 2, Vol. 69, June, 1980, pp. 511–519.
12.
Harik, I. E., “Analytical Solution to Orthotropic Sector,” Journal of Engineering Mechanics, ASCE, Vol. 110, No. 4, Apr., 1984, pp. 554–568.
13.
Harik, I. E., “Bending of Transversally Loaded Orthotropic Rectangular and Sector Plates,” Civil Engineering Report No. WSUCE‐183, Wayne State University, Detroit, Mich., Feb., 1983.
14.
Harik, I. E., and Pashanasangi, S., “Influence of the State of Orthotropy on the Bending of Sector Plates,” Twelfth Conference on Theoretical and Applied Mechanics (SECTAM XII), held at Callaway Gardens, Pine Mountain, Ga., May 10–11, 1984, pp. 329–333.
15.
Heins, C. P., “The Presentation of the Slope‐Deflection Method for the Analysis of Curved Orthotropic Highway Bridges,” Civil Engineering Report No. 15, University of Maryland, College Park, Md., June, 1967.
16.
Heins, C. P., and Hails, R. L., “Behavior of Stiffened Curved Plate Model,” Journal of the Structural Division, ASCE, Vol. 95, No. ST11, Nov., 1969, pp. 2353–2370.
17.
Heins, C. P., Bending and Torsional Design in Structural Members, Lexington Books, Lexington, Mass., 1975.
18.
Heins, C. P., Applied Plate Theory for the Engineer, Lexington Books, Lexington, Mass., 1976.
19.
MacManus, P. F., Nasir, G. F., and Culver, C. G., “Horizontally Curved Girders—State of the Art,” Journal of the Structural Division, ASCE, Vol. 95, No. ST5, 1969, pp. 853–870.
20.
Onate, E., and Suarez, B., “A Unified Approach for the Analysis of Bridges, Plates and Axisymmetric Shells Using the Linear Mindlin Strip Element,” Computers and Structures, Vol. 17, No. 3, 1983, pp. 407–426.
21.
Pardoen, G. C., and Marienthal, M. J., “Finite Strip Method in Polar Coordinates,” Journal of the Engineering Mechanics Division, ASCE, Vol. 104, No. EM3, June, 1978, pp. 587–604.
22.
Pashanasangi, S., “Bending of Sector Plates and Horizontally Curved Bridge Decks,” thesis presented to the University of Kentucky, at Lexington, Ky., in 1984, in partial fulfillment of the requirements for the degree of Master of Science.
23.
Sawko, F., and Merriman, P. A., “An Annular Segment Finite Element for Plate Bending,” International Journal for Numerical Methods in Engineering, Vol. 3, 1971, pp. 119–129.
24.
Sawko, F., “Computer Analysis of Grillages Curved in Plan,” International Association for Bridges and Structural Engineering, Vol. 29, 1969, pp. 41–52.
25.
Timoshenko, S., and Woinowsky‐Krieger, S., Theory of Plates and Shells, 2nd Ed., McGraw‐Hill Book Co., Inc., New York, N.Y., 1959.
26.
Yonezawa, H., “Moments and Free Vibrations in Curved Girder Bridges,” Journal of the Engineering Mechanics Division, ASCE, Vol. 88, No. EM1, Feb., 1962, pp. 1–21.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 111 • Issue 7 • July 1985
Pages: 1517 - 1532
Copyright
Copyright © 1985 ASCE.
History
Published online: Jul 1, 1985
Published in print: Jul 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.