Buckling of Thin Walled Beams Under Water Loading
Publication: Journal of Structural Engineering
Volume 110, Issue 11
Abstract
An approximate analysis of end supported, thin‐walled prismatic members of open profile section to predict buckling loads under dead weight and water loading is presented. When the critical buckling mode involves considerable torsional component, the water loading may lead to a significant reduction in the buckling load due to the shift of the centroid of the water weight with respect to the undeformed configuration. A finite element displacement model has been adopted to formulate the discrete critical equilibrium equations. Numerical examples show considerable reductions in critical loads for the water loading case.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alvarez, L. M., and Prato, C. A., “Analysis of Prismatic Folded Plate Structures,” Technical Report, Department of Structures, National University of Córdoba, Argentina, Feb., 1973.
2.
Cheung, Y. K., Finite Strip Method in Structural Analysis, 1st Ed., Pergamon Press, Oxford, U.K., 1976, pp. 88–89.
3.
Goldberg, J., and Setlur, A., “Stability of Long Span Folded Plate Structures,” IASS Symposium on Problems of Interdependence of Design and Construction of Large Scale Shells for Industrial and Civil Buildings, Leningrad, USSR, Sept., 1966.
4.
Goodier, J. N., “Torsional and Flexural Buckling of Bars of Thin‐Walled Open Sections under Compressive and Bending Loads,” Cornell University Engineering Experimental Station Bulletin, Ithaca, N.Y., Dec., 1941, and Jan., 1942.
5.
Larsson, C. A., Godoy, L. A., and Prato, C. A., “Experimental Buckling Loads of Water Loaded Beams,” submitted for publication.
6.
Meek, H., “Instability of an Angle Section Beam under an Applied Bending Moment,” International Journal of Mechanical Sciences, Vol. 11, 1969, pp. 199–207.
7.
Mikhail, M., and Guralnik, S., “The Nonlinear Response of Transversely Loaded Folded Plate Structures,” International Journal for Nonlinear Mechanics, Vol. 6, 1971, pp. 81–99.
8.
Mikhail, M., and Guralnik, S., “Buckling of Simply Supported Folded Plates,” Journal of the Engineering Mechanics Division, ASCE, Vol. 97, No. EM5, Oct., 1971, pp. 1363–1380.
9.
Rontsch, G., “Model Tests for Investigating the Stability of Folded Plate Structures,” IASS Bulletin 25, Mar., 1965.
10.
Swartz, S., Mikhail, M., and Guralnik, S., “Buckling of Folded Plate Structures,” Experimental Mechanics, Vol. 9, June, 1969, pp. 269–274.
11.
Swartz, S., Rosebraugh, V., and Fanjiang, G., “Local Buckling of Long Span Folded Plates,” Journal of the Structural Division, ASCE, Vol. 101, No. ST5, May, 1971, pp. 1097–1109.
12.
Swartz, S., and Rosebraugh, V., “Local Buckling of Long Span Concrete Folded Plates,” Journal of the Structural Division, ASCE, Vol. 102, No. ST10, Oct., 1976, pp. 1981–1988.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Nov 1, 1984
Published in print: Nov 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.