Web Crippling of Rectangular Hollow Sections
Publication: Journal of Structural Engineering
Volume 110, Issue 10
Abstract
The web crippling strength of manufactured, steel, rectangular hollow section tube side walls, or webs, under transverse compressive loads, is examined through experimental research on isolated, equal‐width, cross joints, where either plate or rectangular hollow section branch members are welded to a rectangular hollow section chord member. The results of 31 laboratory tests undertaken by the writer are presented, with 40 other tests undertaken internationally. Joint parameters covered include chord wall slenderness, chord aspect ratio, tube forming process, tube yield stress, bearing length, the inclination of the branch member to the chord, and chord axial load. Test data is correlated with 6 methods currently available for the prediction of the web crippling strength of such joints, and a suitable approach for strength estimation is recommended.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barentse, J., “Investigation into Static Strength of Welded T‐Joints Made of Rectangular Hollow Sections,” Stevin Reports 6‐76‐23 and 6‐77‐7, Delft University of Technology, Delft, Netherlands, 1976–1977.
2.
Brodka, J., and Szlendak, J., “Strength of Cross Joints in Rectangular Hollow Sections,” presented at the 1980, XXVI Scientific Conference of the Civil and Hydraulic Engineering Section of the Polish Academy of Science and of the Science Division of PZITB.
3.
Bergfelt, A., “Girder Web Stiffening for Patch Loading,” Publication S83:1, Department of Structural Engineering, Chalmers University of Technology, Göteborg, Sweden, 1983.
4.
Czechowski, A., and Brodka, J., “Etude de la Resistance Statique des Assemblages Soudés en Croix de Profils Creux Rectangulaires,” Construction Métallique, Vol. 3, Paris, France, 1977, pp. 17–25.
5.
Czechowski, A., Szlendak, J., and Zycinski, J., “Investigation of Selected Tubular Joints in Elements of a ‘Mostostal’ Integrated System—Load Capacity of Frame Joints Having Shape of Letter T—Stage 2: Theoretical Analysis of Joints,” COBKM Mostostal Report No. 07/1/13.3.4.N, Mostostal, Warsaw, Poland, 1979.
6.
Davies, G., and Coutie, M. G., “The Collapse Behaviour of Steel Welded Cross Joints in Rectangular Hollow Section,” presented at the November, 1979, Institution of Structural Engineers/Building Research Establishment Seminar on the Use of Physical Models in the Design of Offshore Structures, held at Watford, England.
7.
Davies, G., Piatt, J. C., and Snell, C., “The Buckling of Long Simply Supported Rectangular Plates under Partially Distributed Skew Pinch Loads,” Report NUCE/ST/10‐1982, Department of Civil Engineering, University of Nottingham, Nottingham, England, 1982.
8.
Davison, T. A., and Birkemoe, P. C., “Column Behaviour of Cold‐Formed Hollow Structural Steel Shapes,” Canadian Journal of Civil Engineering, Vol. 10, No. 1, Ottawa, Canada, Mar., 1983, pp. 125–141.
9.
Dixon, D. A., “The Effects of Full Width Transverse Compressive Loads on RHS,” thesis presented to the University of Toronto, at Toronto, Ontario, in 1983, in partial fulfillment of the requirements for the degree of Master of Applied Science.
10.
Giddings, T. W., “Welded Joints in Tubular Construction,” presented at the April, 1981, Conference on Joints in Structural Steelwork, held at Teeside Polytechnic, Middlesbrough, England, pp. 4.3–4.24.
11.
Giddings, T. W., and Wardenier, J., “The Strength and Behaviour of Statically Loaded Welded Connections in Structural Hollow Sections,” Monograph No. 6 (Draft), CIDECT, Paris, France, 1982.
12.
Graham, J. D., Sherbourne, A. N., and Khabbaz, R. N., “Welded Interior Beam‐to‐Column Connections,” American Institute of Steel Construction, New York, N.Y., 1959.
13.
Granholm, C. A., “Provning av balkar med extremt tunt liv.,” Rapport 202, Inst. f. Byggnadsteknik, CTH, Göteborg, Sweden, 1960.
14.
Holmes, M., Astill, A. W., and Martin, L. H., “Web Buckling of Rolled Steel Beams,” CIRIA Report ISBN:086017‐153‐1, Construction Industry Research and Information Association, London, England, Nov., 1980.
15.
Johnston, B. G., “Guide to Stability Design Criteria for Metal Structures,” John Wiley and Sons, Inc., Toronto, Ontario, 1976, pp. 559–569.
16.
Jubb, J. E., and Redwood, R. G., “Design of Joints to Box Sections,” presented at the May, 1966, Institution of Structural Engineers Conference on Industrial Building and the Structural Engineer, held in England.
17.
Kato, B., and Nishiyama, I., “T‐Joints Made of Rectangular Tubes,” presented at the November, 1980, Fifth International Specialty Conference on Cold‐Formed Steel Structures, held at the University of Missouri‐Rolla, St. Louis, Mo., pp. 663–679.
18.
Korol, R. M., El‐Zanaty, M., and Brady, F. J., “Unequal Width Connections of Square Hollow Sections in Vierendeel Trusses,” Canadian Journal of Civil Engineering, Vol. 4, No. 2, Ottawa, Canada, June, 1977, pp. 190–201.
19.
Korol, R. M., and Mansour, M. H., “Theoretical Analysis of Haunch‐Reinforced T‐Joints in Square Hollow Sections,” Canadian Journal of Civil Engineering, Vol. 6, No. 4, Ottawa, Canada, Dec., 1979, pp. 601–609.
20.
Mang, F., Bucak, O., and Hummel, T., “Investigations into the Behaviour of High Tensile Steel Joints of Rectangular Hollow Sections,” IIW Document No. XV‐416‐78, International Institute of Welding, May, 1978.
21.
Manual of Steel Construction, 8th ed., American Institute of Steel Construction, New York, N.Y., 1980.
22.
McCarthy, J. R., “Welded Connections of Shaped Structural Steel Tubes,” thesis presented to the University of Wisconsin‐Milwaukee, at Milwaukee, Wisc., in 1976, in partial fulfillment of the requirements for the degree of Master of Engineering.
23.
Moore, H. F., and Wilson, W. M., “Strength of Webs of I‐Beams and Girders,” Bulletin No. 86, University of Illinois Engineering Experiment Station, Ill., May, 1916.
24.
Mouty, J., “Calcul des Charges Ultimes des Assemblages Soudés de Profils Creux Carrés et Tectangulaires,” Construction Metallique, Vol. 2, Paris, France, June, 1976, pp. 37–58.
25.
Packer, J. A., “Developments in the Design of Welded HSS Truss Joints with RHS Chords,” Canadian Journal of Civil Engineering, Vol. 10, No. 1, Ottawa, Canada, Mar., 1983, pp. 92–103.
26.
Packer, J. A., and Haleem, A. S., “Ultimate Strength Formulae for Statically Loaded Welded HSS Joints in Lattice Girders with RHS Chords,” presented at the May, 1981, Canadian Society for Civil Engineering Annual Conference, held at Fredericton, N.B., Canada, Vol. 1, pp. 331–343.
27.
Redwood, R. G., “The Behaviour of Joints between Rectangular Hollow Structural Members,” Civil Engineering and Public Works Revieiw, Vol. 60, No. 711, London, England, 1965, pp. 1463–1469.
28.
Roberts, T. M., and Markovic, N., “Stocky Plate Girders Subjected to Edge Loading,” Proceedings of the Institution of Civil Engineers, Part 2, Vol. 75, London, England, Sept., 1983, pp. 539–550.
29.
Safe Load Tables for Structural Steel—Metric Units, 3rd ed., Australian Institute of Steel Construction, Sydney, Australia, 1975.
30.
Specification for the Design of Cold‐Formed Steel Structural Members, Report SG80‐1, Committee of Sheet Steel Producers, American Iron and Steel Institute, Wash., Sept., 1980, pp. 23–26.
31.
Wardenier, J., Hollow Section Joints, Delft University Press, Delft, Netherlands, 1982.
32.
Winter, G., and Pian, R. H. J., “Crushing Strength of Thin Steel Webs,” Bulletin No. 35—Part 1, Cornell University Engineering Experiment Station, Ithaca, N.Y., Apr., 1946.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Oct 1, 1984
Published in print: Oct 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.