Beams with Torsional Stiffeners
Publication: Journal of Structural Engineering
Volume 109, Issue 7
Abstract
Results are presented from an investigation on stiffening wideflange steel beams for torsional loading. Four types of stiffeners, involving either plate elements or small sections of channels, were used for pin ended, fix ended and cantilevered beams subject to either concentrated or distributed torques. Both the quantity and the location of the stiffeners were varied. A finite element analysis was used to develop design recommendations on the type of stiffener, the size, and the placement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Blodgett, O. W., Design of Welded Structures, James F. Lincoln Arc Welding Foundation, Cleveland, Ohio, 1966, pp. 1–25.
2.
Boresi, A. P., Sidebottom, O. M., Seely, F. B., and Smith, J. O., Advanced Mechanics of Materials, 3rd ed., John Wiley and Sons, New York, N.Y., 1978.
3.
Brockenbrough, P. L., and Johnston, B. G., Steel Design Manual, United States Steel Corporation, 1974, pp. 165–177.
4.
Evick, D. R., and Heins, C. P., “Torsion of Nonprismatic Beams of Open Section,” Journal of the Structural Division, ASCE, Vol. 98, No. ST12, Proc. Paper 9453, Dec., 1972, pp. 2769–2784.
5.
Heins, C. P., and Potocko, R. A., “Torsional Stiffening of I‐Girder Webs,” Journal of the Structural Division, ASCE, Vol. 105, No. ST8, Proc. Paper 14788, Aug., 1979, pp. 1689–1698.
6.
Hotchkiss, J. G., “Torsion of Rolled Steel Sections in Building Structures,” Engineering Journal, American Institute of Steel Construction, Vol. 3, New York, N.Y., Jan., 1966, pp. 19–45.
7.
Manual of Steel Construction, American Institute of Steel Construction, New York, N.Y., 1980.
8.
Ojalvo, M., discussion of “Torsional Stiffening of I‐Girder Webs,” Journal of the Structural Division, ASCE, Vol. 106, No. ST4, Proc. Paper 15302, Apr., 1980, p. 939.
9.
Ojalvo, M., discussion of “Warping and Distortion at I‐Section Joints,” by Porpan Vacharajittiphan and Nicholas S. Trahair, Journal of the Structural Division, ASCE, Vol. 101, No. ST1, Proc. Paper 1139, Jan., 1975, pp. 343–345.
10.
Ojalvo, M., and Chambers, R. S., “Effect of Warping Restraints on Tbeam Buckling,” Journal of the Structural Division, ASCE, Vol. 103, No. ST12, Proc. Paper 13430, Dec., 1977, pp. 2351–2360.
11.
Pastor, T. P., and DeWolf, J. T., “Beams with Torsional and Flexural Loads,” Journal of the Structural Division, ASCE, Vol. 105, No. ST3, Mar., 1979, pp. 527–538.
12.
Potocko, R. A., and Heins, C. P., “Girder Web Stiffening Using Closed Sections,” Journal of Civil Engineering Design, Vol. 1, Aug., 1979, pp. 1–14.
13.
Salmon, C. G., and Johnson, J. E., Steel Structures, Intext Educational Publishers, Scranton, Pa., 1971.
14.
Szewczak, R. M., “Torsion in Beams of Open Section with Stiffeners,” thesis presented to the University of Connecticut, at Storrs, Conn., in 1981, in partial fulfillment of the requirements for the degree of Master of Science.
15.
“Torsional Analysis of Rolled Steel Sections,” Bethlehem Steel Handbook 1963‐C, Bethlehem Steel, Bethlehem, Pa., 1963.
16.
Vacharajittiphan, P., and Trahair, N. S., “Warping and Distortion at I‐Section Joints,” Journal of the Structural Division, ASCE, Vol. 100, No. ST3, Mar., 1974, pp. 547–564.
17.
Vacharajittiphan, P., and Trahair, N. S., closure to “Warping and Distortion at I‐Section Joints,” Journal of the Structural Division, ASCE, Vol. 101, No. ST8, Aug., 1975, pp. 1703–1705.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Jul 1, 1983
Published in print: Jul 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.