Coupled Moment‐Axial Force Behavior in Bolted Joints
Publication: Journal of Structural Engineering
Volume 109, Issue 5
Abstract
The sources of nonlinearities in the behavior of bolted steel connections are briefly studied, and a connection model is proposed. The model is used to demonstrate the nature of the nonlinear behavior of bolted connections, including coupling effects between moment and axial force. Using double angle connections, the applicability of the model to the analysis of plane frames, including the important problem of predicting the behavior of a specific connection, is examined. Numerical examples demonstrate the effectiveness of the model.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ackroyd, M. H., and Gerstle, K. H., “Behavior of Type 2 Steel Frames,” presented at the April, 1980, ASCE Spring Convention, held at Portland, Oreg.
2.
Ackroyd, M. H., and Gerstle, K. H., “Strength and Stiffness of Type 2 Steel Frames,” Report to American Iron and Steel Institute, Department of Civil Environmental and Architectural Engineering, University of Colorado, Boulder, Colo., July, 1977.
3.
Agerskov, H., “Analysis of Bolted Connections Subject to Prying,” Journal of the Structural Division, ASCE, Vol. 103, No. ST11, Nov., 1977, pp. 2145–2163.
4.
Agerskov, H., “High‐Strength Bolted Connections Subject to Prying,” Journal of the Structural Division, ASCE, Vol. 102, No. ST1, Jan., 1976, pp. 161–175.
5.
Cullimore, M. S. G., and Eckhart, J. B., “The Distribution of the Clamping Pressure in Friction Grip Bolted Joints,” The Structural Engineer, Vol. 52, London, England, Apr., 1974, pp. 129–131.
6.
Douty, R. T., and McGuire, W., “High Strength Bolted Moment Connections,” Journal of the Structural Division, ASCE, Vol. 91, No. ST2, Apr., 1965, pp. 101–128.
7.
Fielding, D. J., and Chen, W. F., “Steel Frame Analysis and Connection Shear Deformation,” Journal of the Structural Division, ASCE, Vol. 99, No. ST1, Jan., 1973, pp. 1–18.
8.
Fisher, J. W., “Behavior of Fasteners and Plates with Holes,” Journal of the Structural Division, ASCE, Vol. 91, No. ST6, Dec., 1965, pp. 265–286.
9.
Frye, M. J., and Morris, G. A., “Analysis of Flexibly Connected Steel Frames,” Canadian Journal of Civil Engineering, Vol. 2, No. 2, June, 1975, pp. 280–291.
10.
Grundy, P., Thomas, I. R., and Bennetts, I. D., “Beam‐to‐Column Moment Connections,” Journal of the Structural Division, ASCE, Vol, 106, No. ST1, Jan., 1980, pp. 313–330.
11.
Kato, B., “Beam‐to‐Column Connection Research in Japan,” Journal of the Structural Division, ASCE, Vol. 108, No. ST2, Feb., 1982, pp. 343–360.
12.
Kato, B., and McGuire, W., “Analysis of T‐stub flange‐to‐Column Connections,” Journal of the Structural Division, ASCE, Vol. 99, No. ST5, May, 1973, pp. 865–888.
13.
Kennedy, D. J. L., “Moment‐Rotation Characteristics of Shear Connections,” Engineering Journal, American Institute of Steel Construction, Vol. 6, No. 4, Oct., 1969, pp. 105–115.
14.
Krawinkler, H. B., Bertero, V. V., and Popov, E. P., “Shear Behavior of Steel Frame Joints,” Journal of the Structural Division, ASCE, Vol. 101, No. ST11, Nov., 1975, pp. 2317–2336.
15.
Krawinkler, H., and Popov, E. P., “Seismic Behavior of Moment Connections and Joints,” Journal of the Structural Division, ASCE, Vol. 108, No. ST2, Feb., 1982, pp. 373–391.
16.
Krishnamurthy, N., and Graddy, D. E., “Correlation Between 2‐ and 3‐Dimensional Finite Element Analysis of Steel Bolted End‐Plate Connections,” Computers and Structures, Vol. 6, Nos. 4/5, Dublin, Ireland, Aug./Oct., 1976, pp. 381–389.
17.
Krishnamurthy, N., Huang, H.‐T., Jeffrey, P. K., and Avery, L. K., “Analytical M‐9 Curves for End‐Plate Connections,” Journal of the Structural Division, ASCE, Vol. 105, No. ST1, Jan., 1979, pp. 133–145.
18.
Lewitt, C. W., Chesson, E., Munse, W. H., “Restraint Characteristics of Flexible Riveted and Bolted Beam‐to‐Column Connections,” Bulletin No. 500, Engineering Experiment Station, University of Illinois, Urbana, Ill., 1969.
19.
Lionberger, S. R., and Weaver, W., Jr., “Dynamic Response of Frames with Nonrigid Connections,” Journal of the Engineering Mechanics Division, ASCE, Vol. 95, No. EM1, Feb., 1969, pp. 95–114.
20.
Mann, A. P., and Morris, L. J., “Lack of Fit in End‐Plate Connections,” presented at the April, 1980, ASCE Spring Convention, held at Portland, Oreg.
21.
Maruyama, K., Yoshimoto, I., and Nakano, Y., “On Spring Constant of Connected Parts in Bolted Joints,” Bulletin of the Japanese Society of Mechanical Engineers, Vol. 18, No. 126, Tokyo, Japan, Dec., 1975, pp. 1472–1480 (in English).
22.
Moncarz, P. D., and Gerstle, K. H., “Steel Frames with Nonlinear Connections,” Journal of the Structural Division, ASCE, Vol. 107, No. 8, Aug., 1981, pp. 1427–1441.
23.
Motosh, N., “Determination of Joint Stiffness in Bolted Connections,” Journal of Engineering for Industry, American Society of Mechanical Engineers, Vol. 98, No. 3, Aug., 1976, pp. 858–861.
24.
Nair, R. S., Birkemoe, P. C., and Munse, W. H., “High Strength Bolts Subject to Tension and Prying,” Journal of the Structural Division, ASCE, Vol. 100, No. ST2, Feb., 1974, pp. 351–372.
25.
Packer, J. A., and Morris, L. J., “A Limit State Design Method for the Tension Region of Bolted Beam‐Column Connections,” The Structural Engineer, Vol. 55, No. 10, London, England, Oct., 1977, pp. 446–457.
26.
Rentschler, G. P., Chen, W. F., and Driscoll, G. C., “Beam‐to‐Column Web Connection Details,” Journal of the Structural Division, ASCE, Vol. 108, No. ST2, Feb., 1982, pp. 393–409.
27.
Richard, R. M., Gillett, P. E., Kriegh, J. D., and Lewis, B. A., “The Analysis and Design of Single Plate Framing Connections,” Engineering Journal, American Institute of Steel Construction, Second Quarter, 1980, pp. 1–15.
28.
Romstad, K. M., and Subramanian, C. V., “Analysis of Frames with Partial Connection Rigidity,” Journal of the Structural Division, ASCE, Vol. 96, No. ST11, Nov., 1970, pp. 2283–2300.
29.
Tarpy, T. S., “Beam‐to‐Column End Plate Connections,” presented at the April, 1980, ASCE Spring Convention, held at Portland, Oreg.
30.
Wales, M. W., “A Mathematical Model of the Nonlinear Behavior of Bolted Steel Connections,” thesis, presented to Northwestern University, at Evanston, Ill., in 1981, in partial fulfillment of the requirements for the Degree of Master of Science.
31.
Witteveen, J., Stark, J. W. B., Bijlaard, F. S. K., and Zoetemeijer, P., “Welded and Bolted Beam‐to‐Column Connections,” Journal of the Structural Division, ASCE, Vol. 108, No. ST2, Feb., 1982, pp. 433–455.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: May 1, 1983
Published in print: May 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.