Statistical Study on Compression Butt‐Welded Plate
Publication: Journal of Structural Engineering
Volume 109, Issue 2
Abstract
A statistical investigation on geometrical imperfections and fabrication tolerances of plate elements as well as the reducing effect on their ultimate strength in steel girder bridges fabricated in Japan are described. Measured imperfections are misalignments and angular changes of butt‐welded plate elements, such as outstanding compression flanges of plate girder and composite I‐girder bridges, as well as plate panels between stiffeners of stiffened compression plates and longitudinal stiffeners in steel box girders. The finite element method based on the elasto‐plastic finite displacement theory is applied to precise estimation of the ultimate strength of plate elements. Both the imperfections and the ultimate strength are described in semiprobabilistic terms by fitting Weibull distribution and gamma distribution functions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
The Design and Construction of Minato Oohashi Bridge, Hanshin Expressway Public Corporation, Japan Society of Civil Engineers, 1975, pp. 701–713, (in Japanese).
2.
Dorman, A. J., and Dwight, J. B., “Tests on Stiffened Compression Panels and Plate Panels, Steel Box Girder Bridges, P. Cartledge, ed., The Institution of Civil Engineers, London, U.K., 1973, pp. 63–75.
3.
Inquiry into the Basis of Design and Method of Erection of Steel Box Girder Bridges, Interim Design and Workmanship Rules, Part IV, Report of the Committee Appendix, Department of the Environment, London, U.K., 1973.
4.
Specifications for Highway Bridges, Japan Road Association, Part II Steel Bridges, 1980.
5.
Kitada, T., “Study on Ultimate Strength of Steel Plates and Stiffened Plates under Compression,” thesis presented to the Osaka University, at Osaka, Japan, in 1980, in partial fulfillment of the requirements for the degree of Doctor of Engineering.
6.
Komatsu, S., Kitada, T. and Miyazaki, S., “Elasto‐Plastic Analysis of Compressed Plate with Residual Stress and Initial Deflection,” Proceedings of the Japan Society of Civil Engineers, No. 244, Dec., 1975, pp. 1–4, (in Japanese).
7.
Komatsu, S., Nara, S., and Kitada, T., “Elasto‐Plastic Analysis of Orthogonally Stiffened Plates with Initial Imperfections under Uniaxial Compression,” Computers & Structures, Vol. 11, No. 5, 1980, pp. 429–437.
8.
Komatsu, S., and Kitada, T., “Statistical Study on Compression Flange Plates,” Journal of the Structural Division, ASCE, Vol. 109, No. 2, Feb., 1983, pp. 404–417.
9.
“Statistical Study on the Initial Deformations and the Ultimate Strength of Steel Bridge Members,” Committee of Initial Deflection Measurement (IDMC), Komatsu, S., Chmn., Journal of the Society of Steel Construction of Japan, Vol. 16, No. 179, 1980, pp. 10–43, (in Japanese).
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Feb 1, 1983
Published in print: Feb 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.