Exact Buckling and Frequency Calculations Surveyed
Publication: Journal of Structural Engineering
Volume 109, Issue 1
Abstract
The usefulness and simplicity of an existing stiffness matrix method is emphasized by presenting it without its relatively complex proofs, and with simple examples. The method ensures that no natural frequencies are missed in undamped free vibration problems, and that no critical load factors are missed in buckling problems. This is maintained even when using the ‘exact’ member equations obtained by solving the appropriate differential equations. The method applies to all structures for which ‘exact’ member equations exist. The published applications are surveyed. They include rigidly jointed plane frames, space frames, and prismatic assemblies of flat or curved plates which are isotropic or anisotropic, and subjected to in‐plane normal or shear stresses. They also cover efficient multi‐level substructuring, design instead of analysis, damping, forced vibrations, elastic‐plastic collapse and programs for large computers, small computers, and programmable pocket calculators.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Åkesson, B. Å., “PFVIBAT—A Computer Program for Plane Frame Vibration Analysis by an Exact Method,” International Journal for Numerical Methods in Engineering, Vol. 10, No. 6, 1976, pp. 1221–1231.
2.
Åkesson, B., and Tägnfors, H., “PFVIBAT—II: A Computer Program for Plane Frame Vibration Analysis,” Publication No. 25, Division of Solid Mechanics, Chalmers University of Technology, Gothenburg, Sweden, 1978.
3.
Åkesson, B., Tägnfors, H., and Johannesson, O., Böjsvängande Balkar Och Ramar, Almqvist and Wiksell, Stockholm, Sweden, 1972.
4.
Anderson, M. S., “Vibration of Prestressed Periodic Lattice Structures,” Proceedings of the American Institute of Aeronautics and Astronautics Dynamics Specialists Conference, AIAA Paper No. 81‐0620, Atlanta, Ga., Apr. 9–10, 1981.
5.
Anderson, M. S., and Stroud, W. J., “General Panel Sizing Computer Code and its Application to Composite Structural Panels,” Proceedings of the American Institute of Aeronautics and Astronautics Journal, Vo. 17, No. 8, Aug., 1979, pp. 892–897.
6.
Anderson, M. S., Stroud, W. J., Durling, B. J., and Hennessy, K. W., “PASCO: Structural Panel Analysis and Sizing Code—Users Manual,” National Aeronautics and Space Administration Technical Memorandum 80182, Washington, D.C., 1980.
7.
Blaszkowiak, S., and Kaczkowski, Z., Iterative Methods in Structural Analysis, Pergamon Press, Oxford, England, 1966.
8.
Gelfert, M., and Wittrick, W. H., “A Finite Prism Element for Stability Analysis of Bulb Flat Stiffners,” International Journal of Mechanical Sciences, Vol. 17, No. 7, 1975, pp. 469–473.
9.
Gupta, K. K., “Development of a Finite Dynamic Element for Free Vibration Analysis of Two‐Dimensional Structures,” International Journal for Numerical Methods in Engineering, Vol. 12, No. 8, 1978, pp. 1311–1327.
10.
Gupta, K. K., “Development of a Unified Numerical Procedure for Free Vibration Analysis of Structures,” International Journal for Numerical Methods in Engineering, Vol. 17, No. 2, 1981, pp. 187–198.
11.
Gupta, K. K., “Finite Dynamic Element Formulation for a Plane Triangular Element,” International Journal for Numerical Methods in Engineering, Vol. 14, No. 10, 1979, pp. 1431–1448.
12.
Gupta, K. K., “Free Vibrations of Single‐Branch Structural Systems,” Journal of the Institute of Mathematics and its Applications, Vol. 5, No. 3, Sept., 1969, pp. 351–362.
13.
Gupta, K. K., “On a Numerical Solution of the Plastic Buckling Problem of Structures,” International Journal for Numerical Methods in Engineering, Vol. 12, No. 6, 1978, pp. 941–947.
14.
Gupta, K. K., “On a Numerical Solution of the Supersonic Panel Flutter Eigenproblem,” International Journal for Numerical Methods in Engineering, Vol. 10, No. 3, 1976, pp. 637–645.
15.
Gupta, K. K., “Vibration of Frames and Other Structures with Banded Stiffness Matrix,” International Journal for Numerical Methods in Engineering, Vol. 2, No. 2, 1970, pp. 221–228.
16.
Gustafsson, T., and Carlsson, K.‐G., “PFVIBAT‐DAMP: Computer Program for Harmonic Vibration of Plane Frames Considering Damping,” Report T47, Division of Solid Mechanics, Chalmers University of Technology, Gothenburg, Sweden, 1977.
17.
Hopper, C. T., and Williams, F. W., “Mode Finding in Nonlinear Structural Eigenvalue Calculations,” Journal of Structural Mechanics, Vol. 5, No. 3, 1977, pp. 255–278.
18.
Howson, W. P., “A Compact Method for Computing the Eigenvalues and Eigenvectors of Plane Frames,” Advances in Engineering Software, Vol. 1, No. 4, 1979, pp. 181–190.
19.
Howson, W. P., The Free Vibration of Guyed Masts, thesis presented to the University of Birmingham, at Birmingham, England, in 1975, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
20.
Howson, W. P., and Williams, F. W., “Natural Frequencies of Frames with Axially Loaded Timoshenko Members,” Journal of Sound and Vibration, Vol. 26, No. 4, Feb., 1973, pp. 503–515.
21.
Jennings, A., Matrix Computation for Engineers and Scientists, John Wiley and Sons, Inc., New York, N.Y., 1977.
22.
Leung, A. Y.‐T., “Dynamic Analysis of Periodic Structures,” Journal of Sound and Vibration, Vol. 72, No. 4, Oct., 1980, pp. 451–467.
23.
Livesley, R. K., and Chandler, D. B., Stability Functions for Structural Frameworks, Manchester University Press, Manchester, England, 1956.
24.
Madsen, N. F., “Vibrations of Orthogonally Stiffened Panels,” Journal of Ship Research, Vol. 22, No. 2, June, 1978, pp. 100–109.
25.
Oliveto, G., “Inelastic Buckling of Columns Partially Restrained Against Sway and Rotation,” Engineering Structures, Vol. 2, No. 2, Apr., 1980, pp. 97–102.
26.
Peters, G., and Wilkinson, J. H., “Eigenvalues of with Band Symmetric A and B,” The Computer Journal, Vol. 12, No. 4, Nov., 1969, pp. 398–404.
27.
Plank, R. J., and Williams, F. W., “Critical Buckling of Some Stiffened Panels in Compression, Shear and Bending,” The Aeronautical Quarterly, Vol. 25, Part 3, Aug., 1974, pp. 165–179.
28.
Plank, R. J., and Wittrick, W. H., “Buckling Under Combined Loading of Thin, Flat‐Walled Structures by a Complex Finite Strip Method,” International Journal for Numerical Methods in Engineering, Vol. 8, No. 1, 1974, pp. 323–339.
29.
Richards, T. H., and Leung, Y. T., “An Accurate Method in Structural Vibration Analysis,” Journal of Sound and Vibration, Vol. 55, No. 3, Dec., 1977, pp. 363–376.
30.
Simpson, A., “The Kron Methodology and Practical Algorithms for Eigenvalue, Sensitivity and Response Analyses of Large Scale Structural Systems,” The Aeronautical Journal of the Royal Aeronautical Society, Vol. 84, No. 839, Dec., 1980, pp. 417–433.
31.
Sobel, L. H., Weller, T., and Agarwal, B. L., “Buckling of Cylindrical Panels under Axial Compression,” Computers and Structures, Vol. 6, No. 1, 1976, pp. 29–35.
32.
Stroud, W. J., and Anderson, M.S., “PASCO: Structural Panel Analysis and Sizing Code—Capability and Analytical Foundations,” Technical Memorandum 80181, National Aeronautics and Space Administration, 1980.
33.
Swannell, P., and Tranberg, C. H., “The Forced Vibration of Structural Frames Retaining Distributed Mass and Stiffness,” Proceedings of the Sixth Australasian Conference on the Mechanics of Structures and Materials, University of Canterbury, Christchurch, New Zealand, Aug., 1977, pp. 163–170.
34.
Swannell, P., and Tranberg, C. H., “Procedures for the Forced, Damped Vibration Analysis of Structural Frames Using Distributed Parameter Models,” Computer Methods in Applied Mechanics and Engineering, Vol. 16, No. 3, Dec., 1978, pp. 291–302.
35.
Swannell, P., and Tranberg, C. H., “Simple Plastic Collapse of a Structural Frame under Dynamic Loading using Distributed Parameter Elements,” Proceedings of the Third International Conference in Australia on Finite Element Methods, University of New South Wales, Sydney, Australia, July, 1979, pp. 331–347.
36.
Tarnai, T., “Destabilizing Effect of Additional Restraint on Elastic Bar Structures,” International Journal of Mechanical Sciences, Vol. 22, No. 6, 1980, pp. 379–390.
37.
Tranberg, W., Swannell, P., and Meek, J. L., “Frame Collapse Using Tangent Stiffness,” Journal of the Structural Division, ASCE, Vol. 102, No. ST3, Proc. Paper 11979, Mar., 1976, pp. 659–675.
38.
Viswanathan, A. V., Tamekuni, M., and Baker, L. L., “Buckling Analysis for Anisotropic Laminated Plates under Combined Inplane Loads,” Proceedings of the International Astronautical Federation XXV Congress, Amsterdam, Holland, 30 Sept.–5 Oct., 1974.
39.
Viswanathan, A. V., Tamekuni, M., and Tripp, L. L., “Elastic Stability of Biaxially Loaded Longitudinally Stiffened Composite Structures,” Proceedings of the American Institute of Aeronautics and Astronautics Journal, Vol. 1, No. 11, Nov., 1973, pp. 1553–1559.
40.
Williams, F. W., “Approximations in Complicated Critical Buckling and Free Vibration Analyses of Prismatic Plate Structures,” The Aeronautical Quarterly, Vol. 25, Part 3, Aug., 1974, pp. 180–185.
41.
Williams, F. W., “Buckling of Multi‐Storey Frames with Non‐Uniform Columns, Using a Pocket Calculator Program,” Computers and Structures, Vol. 7, No. 5, Oct., 1977, pp. 631–637.
42.
Williams, F. W., “Comparison between Sparse Stiffness Matrix and Substructure Methods,” International Journal for Numerical Methods in Engineering, Vol. 5, No. 3, 1973, pp. 383–394.
43.
Williams, F. W., “Computation of Natural Frequencies and Initial Buckling Stresses of Prismatic Plate Assemblies,” Journal of Sound and Vibration, Vol. 21, No. 1, Mar., 1972, pp. 87–106.
44.
Williams, F. W., “Consistent, Exact, Wind and Stability Calculations for Sub‐stitute Sway Frames with Cladding,” Proceedings of the Institution of Civil Engineers, London, England, Vol. 67, Part 2, June, 1979, pp. 355–367.
45.
Williams, F. W., “Designing to Achieve Target Values for Eigenfrequencies and Critical Loads,” EUROMECH Colloquium No. 112: Bracketing of Eigenfrequencies of Continuous Structures, Akadélamiai Kiadó, Budapest, Hungary, 1980, pp. 607–639.
46.
Williams, F. W., “Discussion of Buckling and Vibration of Thin, Flat‐Walled Structures Continuous Over Several Spans,” Proceedings of the Institution of Civil Engineers, Vol. 63, Part 2, London, England, Dec., 1977, pp. 943–946.
47.
Williams, F. W., “Discussion of Design of Unbraced Multi‐Storey Steel Frames Under Combined Loading,” Proceedings of the Institution of Civil Engineers, Vol. 69, Part 2, London, England, Dec., 1980, p. 1055.
48.
Williams, F. W., “Natural Frequencies of Repetitive Structures,” Quarterly Journal of Mechanics and Applied Mathematics, Vol. 24, Part 3, Aug., 1971, pp. 285–310.
49.
Williams, F. W., “A Pocket Calculator Program for Some Simple Vibration Problems,” Computers and Structures, Vol. 9, No. 4, Oct., 1978, pp. 427–429.
50.
Williams, F. W., “Stability Functions and Frame Instability—A Fresh Approach,” International Journal of Mechanical Sciences, Vol. 23, No. 12, 1981, pp. 715–722.
51.
Williams, F. W., “A Warning on the Use of Symmetry in Classical Eigenvalue Analyses,” International Journal for Numerical Methods in Engineering, Vol. 12, No. 2, 1978, pp. 379–383.
52.
Williams, F. W., and Banerjee, J. R., “Correspondence on Natural Frequencies of Structures for Designers,” The Structural Engineer, Vol. 59A, No. 3, Mar., 1981, pp. 109–111.
53.
Williams, F. W., and Howson, W. P., “Concise Buckling, Vibration and Static Analysis of Structures Which Include Stayed Columns,” International Journal of Mechanical Sciences, Vol. 20, No. 8, 1978, pp. 513–520.
54.
Williams, F. W., and Wittrick, W. H., “An Automatic Computational Procedure for Calculating Natural Frequencies of Skeletal Structures,” International Journal of Mechanical Sciences, Vol. 12, 1970, pp. 781–791.
55.
Williams, F. W., and Wittrick, W. H., “Computational Procedures for a Matrix Analysis of the Stability and Vibration of Thin Flat‐Walled Structures in Compression,” International Journal of Mechanical Sciences, Vol. 11, 1969, pp. 979–998.
56.
Williams, F. W., and Wittrick, W. H., “Efficient Calculation of Natural Frequencies of Certain Marine Structures,” International Journal of Mechanical Sciences, Vol. 15, No. 10, 1973, pp. 833–843.
57.
Williams, F. W., Wittrick, W. H., and Plank, R. J., “Critical Buckling Loads of Some Prismatic Plate Assemblies,” International Union of Theoretical and Applied Mechanics Symposium on Buckling of Structures, Springer‐Verlag, Berlin, Germany, 1976, pp. 17–26.
58.
Williams, F. W., and Wright, C. J., “A Compact Computer Program for Calculating Buckling Stresses and Natural Frequencies of Vibration of Prismatic Plate Assemblies,” International Journal for Numerical Methods in Engineering, Vol. 12, No. 9, 1978, pp. 1429–1456.
59.
Williams, F. W., and Wright, C. J., “A Design‐Orientated Alternative to Finding the Initial Buckling Loads of Prismatic Plate Assemblies,” The Aeronautical Journal of the Royal Aeronautical Society, Vol. 82, No. 813, Sept., 1978, pp. 399–402.
60.
Wittrick, W. H., “A Unified Approach to the Initial Buckling of Stiffened Panels in Compression,” The Aeronautical Quarterly, Vol. 19, Aug., 1968, pp. 265–283.
61.
Wittrick, W. H., and Williams, F. W., “Natural Vibrations of Thin, Prismatic Flat‐Walled Structures,” International Union of Theoretical and Applied Mechanics Symposium on High Speed Computing of Elastic Structures, University of Liege, Liege, Belgium, 1971, pp. 563–588.
62.
Wittrick, W. H., and Williams, F. W., “Ah algorithm for Computing Critical Buckling Loads of Elastic Structures,” Journal of Structural Mechanics, Vol. 1, No. 4, 1973, pp. 497–518.
63.
Wittrick, W. H., and Williams, F. W., “Buckling and Vibration of Anisotropic or Isotropic Plate Assemblies Under Combined Loadings,” International Journal of Mechanical Sciences, Vol. 16, No. 4, 1974, pp. 209–239.
64.
Wittrick, W. H., and Williams, F. W., “A General Algorithm for Computing Natural Frequencies of Elastic Structures,” Quarterly Journal of Mechanics and Applied Mathematics, Vol. 24, Part 3, Aug., 1971, pp. 263–284.
65.
Wittrick, W. H., and Williams, F. W., “New Procedures for Structural Eigenvalue Calculations,” Proceedings of the Fourth Australasian Conference on the Mechanics of Structures and Materials, University of Queensland, Brisbane, Queensland, Australia, Aug., 1973, pp. 299–308.
66.
Wood, R. H., “Effective Lengths of Columns in Multi‐Storey Buildings,” The Structural Engineer, Vol. 52, No. 7, July, 1974, pp. 235–244;
No. 8, Aug., 1974, pp. 295–302;
No. 9, Sept., 1974, pp. 341–346;
Vol. 53, No. 6, June, 1975, pp. 235–241.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Jan 1, 1983
Published in print: Jan 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.