ANSWAPPS: Model for the Analysis of Grass Swale-Perforated Pipe Systems
Publication: Journal of Irrigation and Drainage Engineering
Volume 133, Issue 3
Abstract
A computer model for the analysis and design of grass swale perforated pipe systems is presented. The model, which was calibrated and validated using experimental as well as field data, performs detailed computations for flow through the system on a lot by lot basis (i.e., from one catchbasin to another). Several parameters affecting the system performance are considered in the modeling approach. These especially included lot size and imperviousness, grass swale dimensions and its infiltration capacity, pipe length, number of orifices and their configuration, trench dimensions, and native soil infiltration capacity. The model was used to simulate the minimum trench depth required to capture runoff from a storm for different native soils and different lot imperviousness ratios. Trench depths varied from 0.3 to depending on native soil infiltration capacity and lot imperviousness.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented in this paper resulted from a study undertaken by Paul Wisner and Associates Inc. (Water Resources and Environmental Consultants) for the Ontario (Canada) Ministry of Environment addressing its needs in the area of stormwater contaminant reduction techniques and the evaluation of groundwater recharge technologies.
References
Abida, H., and Sabourin, J. F. (2006). “Grass swale-perforated pipe system for stormwater management.” J. Irrig. Drain. Eng., 132(1), 55–63.
Barling, R. D., and Moore, I. D. (1993). “The role of buffer strips in the management of waterway pollution.” Proc., Role of Buffer Strips in Management of Waterway Pollution from Diffuse Urban and Rural Sources, Univ. of Hobart.
Bertrand-Krajewski, J., Chebbo, G., and Saget, A. (1998). “Distribution of pollutant mass versus volume in stormwater discharges and the first flush phenomenon.” Water Res., 32, 2341–2356.
Chow, V. T. (1988). Applied hydrology, Civil Engineering series, McGraw-Hill, New York.
Duchene, M. L. (1991). “Design of infiltration trenches using perforated pipe.” MASc thesis, Univ. of Waterloo, Waterloo, Ontario, Canada.
Graham, E. I. (1990). “An urban runoff infiltration basin model.” MASc thesis, Univ. of Waterloo, Waterloo, Ontario, Canada.
Guo, J. C. Y. (1998). “Surface-subsurface model for trench infiltration basins.” J. Water Resour. Plann. Manage., 124(5), 280–284.
Gupta, K., and Saul, A. J. (1996). “Specific relationships for the first flush load in combined sewer flows.” Water Res., 30, 1244–1252.
Horner, R. (1999). “Infiltration facilities for stormwater quality control.” Proc., Managing Stormwater Runoff Workshop, Univ. of Wisconsin–Extension, Milwaukee.
Jan–Tai-Kuo, Yu, S. L., Fassman, E. A., and Pan, H. (2001). “Field test of grassed-swale performance in removing runoff pollution.” J. Water Resour. Plann. Manage., 127(3), 168–171.
Keifer, J. C., and Chu, H. H. (1957). “Synthetic storm patterns for drainage design.” J. Hydr. Div., 83(4), 1–25.
Kennedy, J. B., and Neville, A. M. (1974). Basic statistical methods for engineers and scientists, 2nd Ed., Harper & Row, New York.
Kim, L. H., Kayhanian, M., Zoh, K. D., and Stenstrom, M. K. (2005). “Modeling of highway stormwater runoff.” Sci. Total Environ., 348(1–3), 1–18.
Kuo, C. Y., Zhu, J. L., and Dollard, L. A. (1989). “Infiltration trenches for urban runoff control.” Proc., National Conf. of Hydraulic Engineering, ASCE, New York, 1029–1034.
Lee, J. H., and Bang, K. W. (2000). “Characterization of urban stormwater runoff.” Water Res., 34, 1773–1780.
Lee, J. H., Bang, K. W., Ketchum, L. H., Choe, J. S., and Yu, M. J. (2002). “First flush analysis of urban storm runoff.” Sci. Total Environ., 293(1–3), 163–175.
Livingston, E. H. (1988). “State perspectives on water quality criteria.” Proc., Design of Urban Runoff Quality Controls, ASCE, New York, 49–66.
Nash, J. E. (1957). The form of the instantaneous unit hydrograph, Int. Assoc. Scientific Hydrology Publications, Vol. 3, No. 45.
Paul Wisner and Associates Inc. (1993). “Performance review of grass swale-perforated pipe stormwater drainage systems.” Rep. Prepared for the Ontario Ministry of the Environment, Ontario, Canada.
Russel, G. E. (1937). Textbook on hydraulics, Henry Holt.
Sabourin, J. F. and Associates Inc. (2000). “SWMHYMO storm water management hydrological model.” User’s manual, Water Resources and Environmental Consultants, Ottawa.
Schueler, T. R. (1987). Controlling urban runoff: A practical manual for planning and designing urban BMPs, Dept. of Environmental Programs, Metropolitan Washington Council of Governments, Washington, D.C.
Stahre, P., and Urbonas, B. (1989). “Swedish approach to infiltration and percolation design,” Proc., Design of Urban Runoff Quality Controls, ASCE, New York, 307–322.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: May 5, 2005
Accepted: Sep 29, 2006
Published online: Jun 1, 2007
Published in print: Jun 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.