Response of ASCE Task Committee Test Cases to Open-Loop Control Measures
Publication: Journal of Irrigation and Drainage Engineering
Volume 125, Issue 4
Abstract
Automated open- and closed-loop control systems can enhance the performance of irrigation delivery systems. This paper examines the response of the canal test cases developed by the ASCE task committee on canal automation algorithms to a particular anticipatory open-loop control technique, gate stroking. The performance of the ideal gate-stroking solution is compared with the performance of an approximate gate-stroking schedule that was generated by imposing practical constraints on the frequency and magnitude of the gate adjustments. Also analyzed were the performance of a nonanticipatory open-loop control scheme and the effect of model parameter uncertainties on the effectiveness of the control. For the test cases, the approximate gate-stroking schedules performed similarly to the ideal schedules. For two of the test cases, delivery performance was similar with and without anticipation, but was substantially different for the other two tests. The quality of the control degraded as a result of errors in model parameters, particularly in cases with incorrect check gate calibrations and submerged gate flows. Results point out the importance of combining open- and closed-loop control measures to improve the overall effectiveness of the control.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bautista, E., Clemmens, A. J., and Strelkoff, T. S. (1996). “Characterization of canal operations under ideal anticipatory control.” Proc., of North Am. Water and Envir. Congr., ASCE, Reston, Va. (In CD-ROM).
2.
Bautista, E., Clemmens, A. J., and Strelkoff, T. S. (1997). “Inverse computational methods for open-channel flow control.”J. Irrig. and Drain. Engrg., ASCE, 123(2), 129–136.
3.
Bodley, W. E., and Wylie, E. B. (1978). “Control of transients in series channel with gates.”J. Hydr. Div., ASCE, 10, 1395–1407.
4.
Chevereau, G. ( 1991). “Contribution a l'etude de la regulation dans les systemes hydrauliques a surface libre,” PhD thesis, Institut National Polytechnique de Grenoble, Grenoble, France.
5.
Clemmens, A. J., Kacerek, T. F., Grawitz, B., and Schuurmans, W. (1998). “Recommended test cases for canal control algorithms.”J. Irrig. and Drain. Engrg., ASCE, 124(1), 23–30.
6.
Falvey, H. T., and Luning, P. C. (1979). “Gate stroking.” Rep. REC-ERC-79-7, USDI-U.S. Bureau of Reclamation, Washington, D.C.
7.
Holly, F. M., Jr. and Parrish, J. B. ( 1995). “CanalCAD: Dynamic flow simulation in irrigation canals with automatic gate control.” Iowa Institute of Hydraulic Research, Iowa City, Iowa.
8.
Liu, F., Feyen, J., and Berlamont, J. (1992). “Computational method for regulating unsteady flow in open channels.”J. Irrig. and Drain. Engrg., ASCE, 118(10), 674–689.
9.
O'Laughlin, E. (1972). “Application of unsteady flow analysis to operation decisions in long aqueducts.” Proc., ICID 8th Congr., R16, Sofia Bulgaria. 28.2.207–28.2.223.
10.
Parrish, J. B. (1997). “Idealized automated control of sloping canals.”J. Irrig. and Drain. Engrg., ASCE, 123(4), 270–278.
11.
Strelkoff, T. S., Deltrour J. L., Burt, C. M., Clemmens, A. J., and Baume, J. P. (1998). “Influence of canal geometry and dynamics on controllability.”J. Irrig. and Drain. Engrg., ASCE, 124(1), 16–22.
12.
Wylie, E. B. (1969). “Control of transient free surface flow.”J. Hydr. Div., ASCE, 95(1), 347–361.
Information & Authors
Information
Published In
History
Received: Jul 17, 1997
Published online: Jul 1, 1999
Published in print: Jul 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.