Hydrograph Shape and Border Irrigation Efficiency
Publication: Journal of Irrigation and Drainage Engineering
Volume 121, Issue 6
Abstract
Sloping borders with free outflow were studied to determine the effect of inflow hydrograph shape on maximum application efficiency. A zero-inertia model describing the movement of water along the border run with infiltration was used to predict the maximum application efficiency for five inflow hydrograph shapes. The irrigation parameters considered were four infiltration families, three slopes, three roughness coefficients, two field lengths, and three volumes. The maximum application efficiencies averaged over all combinations of the irrigation parameters for the five hydrographs were as follows: constant, 68%; cutback, 77%; cablegation, 59%; modified cutback, 80%; and modified cablegation, 78%. Efficiencies for each hydrograph shape ranged from zero to 92%, with the low values occurring for high infiltration rates and roughness, small slopes, long fields, and low volumes of application. The infiltration family and its cross products with the other irrigation parameters were the most important variables affecting the maximum application efficiency for the five inflow hydrograph shapes.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alazba, A. A. (1994). “Efficiency of irrigation borders as affected by inflow hydrograph shape.” PhD dissertation, University of Arizona, Tucson, Ariz.
2.
James, L. G. (1988). Principles of farm irrigation system design . John Wiley & Sons, Inc., New York, N.Y.
3.
Kostiakov, A. N. (1932). “On the dynamics of the coefficient of water percolation in soils and the necessity for studying it from a dynamic point of view for purposes of amelioration.”Trans., Sixth Congr. Int. Soc. of Soil Sci., Vienna, Austria, Russian part A, 17–21.
4.
National engineering handbook. (1974). “Chapter 4, Sec. 15: border irrigation.” U.S. Soil Conservation Service (SCS), Washington, D.C.
5.
On-Farm Irrigation Committee of the Irrigation and Drainage Division.(1978). “Describing irrigation efficiency and uniformity.”J. Irrig. and Drain. Div., ASCE, 104(1), 35–41.
6.
Reddy, J. M., and Clyma, W. (1982). “Analysis of basin irrigation performance with variable inflow rate.”Agric. Water Mgmt., (5), 295–308.
7.
Sritharan, S. I.(1992). “Equivalent Kostiakov parameters for SCS infiltration families.”J. Irrig. and Drain. Engrg., ASCE, 118(1), 192–197.
8.
Strelkoff, T. (1993). “Flow simulation for surface irrigation design.”Proc., Mgmt. of Irrig. and Drain.: Integrated Perspectives Symp., ASCE, New York, N.Y., 899–906.
9.
Strelkoff, T., and Katopodes, N. D.(1977). “Border irrigation hydraulics with zero inertia.”J. Irrig. and Drain. Div., ASCE, 103(3), 325–342.
10.
Walker, W. R., and Skogerboe, G. V. (1987). Surface irrigation: Theory and practice . Prentice-Hall, Inc., Englewood Cliffs, N.J.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Nov 1, 1995
Published in print: Nov 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.