Beginning of Motion for Selected Unanchored Residue Materials
Publication: Journal of Irrigation and Drainage Engineering
Volume 118, Issue 4
Abstract
Conservation tillage systems help to maintain residue materials from the previous crop on the soil surface. The potential for serious erosion may exist if crop residues are removed by overland flow. This study is conducted to identify the hydraulic conditions required to initiate residue movement by overland flow. Corn, cotton, peanut, pine needles, sorghum, sunflower, and wheat residue are placed in a flume on smooth and sand surfaces, and flow is then introduced in progressive increments. The discharge rate and flow velocity required to initiate residue movement are identified. Hydraulic measurements are used to calculate the ratio of critical flow depth to residue diameter, critical Reynolds number, critical shear stress, dimensionless shear stress, and boundary Reynolds number. Regression equations are developed to relate dimensionless shear stress to boundary Reynolds number. Close agreement is found between predicted and actual dimensionless shear stress. If residue diameter is known, the regression equations can be used to estimate the beginning of motion for other residue materials. Information obtained in this study can be used to help identify proper residue management practices for conservation tillage systems.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brenneman, L. G., and Laflen, J. M. (1982). “Modeling sediment deposition behind corn residue.” Trans. ASAE, 25(5), 1245–1250.
2.
Chow, V. T. (1959). Open channel hydraulics, McGraw‐Hill, Inc., New York, N.Y.
3.
Foster, G. R., Johnson, C. B., and Moldenhauer, W. C. (1982a). “Critical slope lengths for unanchored cornstalk and wheat straw residue.” Trans. ASAE, 25(4), 935–939, 947.
4.
Foster, G. R., Johnson, C. B., and Moldenhauer, W. C. (1982b). “Hydraulics of failure of unanchored cornstalk and wheat straw mulches for erosion control.” Trans. ASAE, 25(4), 940–947.
5.
Gilley, J. E., Finkner, S. C., Spomer, R. G., and Mielke, L. N. (1986a). “Runoff and erosion as affected by corn residue: Part I. Total losses.” Trans. ASAE, 29(1), 157–160.
6.
Gilley, J. E., Finkner, S. C., and Varvel, G. E. (1986b). “Runoff and erosion as affected by sorghum and soybean residue.” Trans. ASAE, 29(6), 1605–1610.
7.
Gilley, J. E., Kottwitz, E. R., and Simanton, J. R. (1990). “Hydraulic characteristics of rills.” Trans. ASAE, 33(6), 1900–1906.
8.
Gilley, J. E., and Finkner, S. C. (1991). “Hydraulic roughness coefficients as affected by random roughness.” Trans. ASAE, 34(3), 897–903.
9.
Gilley, J. E., Kottwitz, E. R., and Wieman, G. A. (1991). “Roughness coefficients for selected residue materials.” J. Irrig. Drain. Engrg., ASCE, 117(4), 503–514.
10.
Gilley, J. E., Kottwitz, E. R., and Wieman, G. A. (1992). “Darcy‐Weisbach roughness coefficients for gravel and cobble surfaces.” J. Irrig. Drain. Engrg., ASCE, 118(1), 104–112.
11.
Laflen, J. M., Baker, J. L., Hartwig, R. O., Buchele, W. F., and Johnson, H. P. (1978). “Soil and water loss from conservation tillage systems.” Trans. ASAE, 21(5), 881–885.
12.
Lane, E. W. (1953). “Design of stable channels.” Trans. ASCE, 120, 1234–1260.
13.
Mannering, J. V., and Meyer, L. D. (1963). “The effects of various rates of surface mulch on infiltration and erosion.” Soil Sci. Soc. Am. Proc., 27(1), 84–86.
14.
Shen, H. W., and Li, R. M. (1973). “Rainfall effect on sheet flow over smooth surface.” J. Hydr. Div., ASCE, 99(5), 771–792.
15.
Simons, D. B., and Senturk, F. (1976). Sediment transport technology. Water Resources Publications, Fort Collins, Colo.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Jul 1, 1992
Published in print: Jul 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.