Local Scour Downstream of Box‐Culvert Outlets
Publication: Journal of Irrigation and Drainage Engineering
Volume 117, Issue 3
Abstract
This laboratory study investigates the local scouring phenomenon in sand that occurs downstream of box culverts. Although culvert hydraulics can include special cases, such as culverts on hydraulically steep slopes for which special energy dissipators at an outlet must be provided to handle supercritical flows, this study was restricted to culverts on horizontal or mild slopes that operate freely and do not require special energy dissipators at their outlets. The principal factors governing this form of local scouring were found to be the discharge rate, the culvert width, the tailwater depth, the downstream channel width, and the bed‐material properties. The experimental program investigated the effects of these principal variables on the local scour hole characteristics. The investigation also reviewed some well‐known empirical formulas for the prediction of maximum scour depth, under a variety of hydraulic conditions. One such relationship for maximum scour depth in a stone bed downstream of a culvert outlet, was modified in this study to make it applicable to scour in sand beds.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abida, H. (1988). “A laboratory investigation of local scour downstream of box culvert outlets and an alternative measure for its control,” thesis presented to the University of Ottawa, at Ottawa, Canada, in partial fulfillment of the requirements for the degree of Master of Applied Science.
2.
Abt, S. R., Ruff, J. F., Doehring, F. K., and Donnell, C. A. (1987). “Influence of culvert shape on outlet scour.” J. Hydr. Engrg., ASCE, 113(3), 393–400.
3.
Ali, K. H. M., and Lim, S. Y. (1986). “Local scour caused by submerged wall jets.” Proc., Inst. of Civ. Engineers, Part 2: Res. and theory, 81, 607–645.
4.
Chen, Y. H. (1970). “Scour at outlets of box culverts,” thesis, presented to Colorado State University, at Fort Collins, Colo., in partial fulfillment of the requirements for the degree of Master of Science.
5.
MTC drainage manual. (1982). Ontario Ministry of Transportation and Communication, Downsview, Canada, Vol. I, Chapter D.
6.
Simons, D. B., and Stevens, M. A. (1971). “Scour control in rock basins at culvert outlets.” River mechanics, H. W. Shen, ed., Colorado State Univ., Fort Collins, Colo., Vol. II.
7.
Smith, G. L. (1957). “An analysis of scour below culvert outlets,” thesis presented to Colorado A&M College, Fort Collins, Colo., in partial fulfillment of the requirements for the degree of Master of Science.
8.
Stevens, M. A. (1969). “Scour in Riprap at Culvert Outlets,” Ph.D. Dissertation, Colorado State University, Fort Collins, Colo.
9.
Valentin, F. (1967). “Considerations Concerning Scour in the Case of Flow Under Gates,” Proceedings, Twelfth Congress, IAHR, vol. 3, Colorado State University, Fort Collins, Colo.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: May 1, 1991
Published in print: May 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.