Muskingum Model for Furrow Irrigation
Publication: Journal of Irrigation and Drainage Engineering
Volume 114, Issue 1
Abstract
A mathematical model, based on volume balance and Muskingum type storage‐discharge relation, is presented for design and evaluation of furrow irrigation systems. Three field data sets from Colorado farms are used to test the model. The Muskingum model is simple and found to effectively simulate the hydraulics of every phase of furrow irrigation. The relative error of simulated results is less than 7% for predicted advance, less than 4.7% for outflow during storage phase, less than 5% for recession, and less than 7% for opportunity time. More testing is, however, necessary to define limitations and strengths of the model, and to enable regionalization of the model parameters.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bassett, D. L. (1972). “A mathematical model of water advance in border irrigation.” Trans. of Amer. Soc. of Agric. Engrs., 15(5) 992–995.
2.
Bautista, E., and Wallender, W. W. (1985). “Spatial variability of infiltration in furrows.” Trans. of the Amer. Soc. of Agric. Engrs., 28(6), 1846–1855.
3.
Chen, C. L., “Techniques of border irrigation by a hydrologic method of routing.” (1965). Report PR‐WR11‐1, Utah Water Res. Lab., Utah State Univ., Logan, Utah.
4.
Chen, C. L., “Surface irrigation using kinematic wave method.” (1970). J. of Irrig. and Drainage Div., ASCE, 96(IR1), 39–46.
5.
Clemmens, A. J. (1979). “Verification of the zero‐inertia model for border irrigation.” Amer. Soc. of Agric. Engrs., 22(6), 1306–1309.
6.
Elliott, R. L., and Walker, W. R. (1982). “Field evaluation of furrow infiltration and advance functions.” Trans. Amer. Soc. of Agric. Engrs., 25(2) 396–400.
7.
Elliott, R. L., and Walker, W. R., and Skogerboe, G. V. (1982). “Zero‐inertia modeling of furrow advance.” J. of the Irrig. and Drainage Div., ASCE, 108(IR3), 179–195.
8.
Fok, Y. S., and Bishop, A. A. (1965). “Analysis of water advance in surface irrigation.” J. of Irrig. and Drainage Div., ASCE, 91(IR1), 99–116.
9.
Hall, W. A. (1956). “Estimating irrigation border flow.” Agric. Engrg. 37(4), 263–265.
10.
Hart, W. E., Bassett, D. L., and Strelkoff, T. S. (1968). “Surface irrigation hydraulics‐kinematics.” J. of Irrig. and Drainage Div., ASCE, 94(IR4), 419–440.
11.
Izadi, B., and Wallender, W. W. (1985). “Furrow hydraulic characteristics and infiltration.” Trans. of Amer. Soc. of Agric. Engrs., 28 (6), 1901–1908.
12.
Katapodes, N. D., and Strelkoff, T. (1977). “Hydrodynamics of border irrigation—complete model.” J. of Irrig. and Drainage Div., ASCE, 103(IR3), 309–324.
13.
Kincaid, D. C., Heermann, D. R., and Kruse, E. G. (1972). “Hydrodynamics of border irrigation advance.” Trans. of Amer. Soc. of Agric. Engrs., 14(4), 674–680.
14.
Lewis, M. R., and Milne, W. E. (1938). “Analysis of border irrigation.” Agric. Eng., 19(6), 267–277.
15.
Ley, T. W. (1978). “Sensitivity of furrow irrigation performance to field and operation variables.” unpublished M.S. thesis, 174 pages, Colorado State Univ., Fort Collins, Colorado.
16.
Ley, T. W., and Clyma, W. (1981). “Furrow irrigation practices in northern Colorado.” Trans. of Amer. Soc. of Agric. Engrs., 24(3), 610–623.
17.
Ram, R. S., and Singh, V. P. (1982a) “Evaluation of models of border irrigation recession.” J. of Agric. Engrg. Res., 27(3), 235–252.
18.
Ram, R. S., and Singh, V. P. (1982b). “A design procedure for closed end irrigation borders.” Agric. Water Mgmt., 5, 1–14.
19.
Ram, R. S., Singh, V. P., and Prasad, S. N., “A quasi‐steady state integral model for border irrigation.” Irrig. Sci., 7, 113–141.
20.
Sakkas, J. G., and Strelkoff, T. S. (1974). “Hydrodynamics of surface irrigation.” J. of Irrig. and Drainage Div., ASCE, 100(IR1), 31–48.
21.
Sherman, B., and Singh, V. P. (1978). “A kinematic model for surface irrigation.” Water Resour. Res., 14(2), 357–364.
22.
Sherman, B., and Singh, V. P. (1982). “A Kinematic model for surface irrigation: an extension.” Water Resour. Res., 18(3) 659–667.
23.
Singh, P., and Chauhan, H. S., “Shape factors in irrigation water advance equation.” J. of the Irrig. and Drainage Div., ASCE, 98(IR3), 443–458.
24.
Singh, V. P., and McCann, R. C. (1976). “Mathematical modeling of hydraulics of irrigation recession.” Presented at the Second Int. Conf. on Math. Modeling, St. Louis, Missouri, July.
25.
Singh, V. P., and Prasad, S. N. (1983). “Derivation of the mean depth in the Lewis and Milne equation for border irrigation.” Proc. of ASCE Specialty Conf. on Advances in Irrig. and Drainage: Surviving External Pressures, 242–249, Jackson, Wyo., July.
26.
Singh, V. P., and Yu, F. X. (1987). “A mathematical model for border irrigation: 1. advance and storage phases.” Irrig. Sci. (in press).
27.
Smith, R. E. (1972). “Border irrigation and ephemeral flood waves.” J. of Irrig. and Drainage Div., ASCE, 98, (IR2), 289–307.
28.
Strelkoff, T., and Katapodes, N. D. (1977). “Border irrigation hydraulics using zero inertia.” Journal. of the Irrig. and Drainage Div., ASCE, 103(IR3), 325–342.
29.
Strelkoff, T. (1977). “Algebraic computation of flow in border irrigation.” J. of Irrig. and Drainage Div., ASCE, 103(IR3), 357–377.
30.
Walker, W. R., and Humpherys, A. S. (1983). “Kinematic‐wave furrow irrigation model.” J. of the Irrig. and Drainage Div., ASCE, 109(4), 377–393.
31.
Wilke, O., and Smerdon, E. T. (1965). “A solution of the irrigation advance problem.” J. of Irrig. and Drainage Div., Proc. of the Amer. Soc. of Civ. Engrs., 91 (IR3), 23–34.
32.
Wu, I. P. (1972). “Recession flow in surface irrigation.” J. of Irrig. and Drainage Div., ASCE, 98(IR9), 77–89.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Feb 1, 1988
Published in print: Feb 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.