Large-Scale Flume Tests of Riprap-Apron Performance at a Bridge Abutment on a Floodplain
Publication: Journal of Hydraulic Engineering
Volume 134, Issue 6
Abstract
Laboratory tests using a large-scale model of a spill-through bridge abutment led to important findings about the performance of a riprap apron as an abutment scour countermeasure. Riprap stone is widely used for protecting side slopes of embankments against erosion, and several design guidelines are available in the literature. In contrast, only a few guidelines exist for the design of a riprap apron around an abutment. These guidelines focus only on the armoring effect of riprap, neglecting other effects. This study shows that apron performance involves several mechanisms: armoring the bed, dissipating large-scale turbulence shed from the abutment, reducing the peak unit discharge, reducing the average shear stress, and shifting the scour region away from the abutment. Together, these mechanisms substantially reduce the maximum scour depth. The test findings are compared with those from a much smaller model of riprap-apron performance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was conducted under Project No. UNSPECIFIED24-18, Scour Countermeasures for Bridge Abutments, the National Cooperative Highway Research Board.
References
Atayee, A. T., Pagan-Ortiz, J. E., Jones, J. S., and Kilgore, R. T. (1993). “Study of riprap as scour protection for bridge abutments.” Proc., Hydraulic Engineering Conf., ASCE, New York.
Chiew, Y. M. (1995). “Mechanics of riprap failure at bridge piers.” J. Hydraul. Eng., 121(9), 635–643.
Chiew, Y. M., and Lim, F. H. (2000). “Failure behavior of riprap layer at bridge piers under live-bed conditions.” J. Hydraul. Eng., 126(1), 43–55.
Chrisohoides, A., Sotiropoulos, F., and Sturm, T. (2003). “Coherent structures in flat-bed abutment flow: Computational fluid dynamics simulations and experiments.” J. Hydraul. Eng., 129(3), 177–186.
Ettema, R., Kirkil, G., and Muste, M. (2006). “Similitude of large-scale turbulence in scour around cylinders,” J. Hydraul. Eng., 132(1), 33–40.
Eve, N. J. (1999). “Riprap protection of bridge abutments.” ME thesis, Univ. of Auckland, Auckland, New Zealand.
Hoffmans, G. J. C. M., and Verheij, H. J. (1997). Scour manual, Balkema, Rotterdam, The Netherlands.
Lagasse, P. F., Zevenbergen, L. W., Schall, J. D., and Clopper, P. E. (2001). “Bridge scour and stream instability countermeasures.” Rep. No. FHWA NHI 01-003, HEC-23, Federal Highway Administration, Washington, D.C.
May, R. W. P., Ackers, J. C., and Kirby, A. M. (2005). Manual on scour at bridges and other hydraulic structures, Pub. No. 551, Construction Industry Research and Information Association, London.
Melville, B., and Coleman, S. (2000). Bridge scour, Water Resource Publications, Littleton, Colo.
Melville, B., van Ballgooy, S., Coleman, S., and Barkdoll, B. (2006). “Countermeasure toe protection at spill-through abutments.” J. Hydraul. Eng., 132(3), 235–245.
Morales, R. (2006). “A large-scale hydraulic model of riprap-apron performance at a bridge abutment on a floodplain.” Master’s thesis, The Univ. of Iowa, Iowa City, Iowa.
Pagan-Ortiz, J. E. (1991). “Stability of rock riprap for protection at the toe of abutments located at the flood plain.” Rep. No. FHWA-RD-91-057, Federal Highway Administration, USDOT, Washington, D.C.
Richardson, E. V., and Davis, S. R. (2001). “Evaluating scour at bridges.” Rep. No. FHWA NHI 01-001, HEC-18, Federal Highway Administration, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Mar 13, 2007
Accepted: Sep 25, 2007
Published online: Jun 1, 2008
Published in print: Jun 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.