Higher-Order Moments of Velocity Fluctuations in an Open-Channel Flow with Large Bottom Roughness
Publication: Journal of Hydraulic Engineering
Volume 133, Issue 1
Abstract
The present study was undertaken to examine the effect of surface roughness on the higher-order velocity moments in a turbulent open-channel flow. The wall roughness is large and the ratio of the roughness size to the depth of flow ranges from 0.1 to 0.15. Flow over two types of roughness conditions (ribs and dunes) are examined and compared with that over a smooth open channel. In the case of the rib roughness, three different spacings are used: , 9, and 18; here, =distance between the leading edges of two consecutive ribs and =height of a rib with square cross section. The shape of the smooth wall dunes was geometrically similar to that commonly used in previous studies. In an effort to understand the influence of local wall roughness, rough-wall dunes are also used in the present study. The variables of interest include higher-order moments, conditional statistics based on a quadrant analysis, relationship of higher-order moments to the Reynolds stress and energy production. Although there are some similarities between open-channel flows and turbulent boundary layers, there are important differences as indicated by the third-order moments. The triple products and the second quadrant events are sensitive to the wall condition. Ejection events are found to be prevalent throughout the depth. It is also clear from the study that one needs to explicitly account for the surface condition in any model development to be able to predict transport characteristics.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers thank the reviewers for suggesting the use of the normalizing scales in Fig. 6 and also contributing to the overall improvement of the paper.
References
Andreopoulos, J., Durst, F., Zaric, Z., and Javonovic, J. (1984). “Influence of Reynolds number on characteristics of turbulent wall boundary layers.” Exp. Fluids, 2, 7–16.
Antonia, R. A., and Luxton, R. E. (1971). “The response of a turbulent boundary layer to an upstanding step change in surface roughness.” J. Basic Eng., 93(1), 22–34.
Balachandar, R., Blakely, D., Tachie, M., and Putz, G. (2001). “A study on turbulent boundary layers in open-channel flows.” ASME J. Fluids Eng., 123(2), 394–400.
Balachandar, R., and Patel, V. C. (2002). “Rough wall boundary layer on plates in open channels.” J. Hydraul. Eng., 128(10), 947–951.
Balachandar, R., and Patel, V. C. (2005). “Velocity measurements in a developed open channel flow in the presence of an upstream perturbation.” J. Hydraul. Res., 43(3), 258–266.
Cardoso, A. H., Graf, W. H., and Gust, G. (1989). “Uniform flow in a smooth open channel.” J. Hydraul. Res., 27(5), 603–616.
Gad-el-Hak, M., and Bandyopadhyay, P. (1994). “Reynolds number effects in wall-bounded turbulent flows.” Appl. Mech. Rev., 47(8), 307–365.
Grass, A. J. (1971). “Structural features of turbulent flow over smooth and rough boundaries.” J. Fluid Mech., 50, 233–255.
Hyun, B. S., Balachandar, R., and Patel, V. C. (2003). “PIV measurements on flow over a fixed dune: Effect of bed roughness.” Proc., 7th Asian Symp. on Visualization, Singapore.
Jiminez, J. (2004). “Turbulent flows over rough walls.” Annu. Rev. Fluid Mech., 36, 173–196.
Keirsbulck, L., Labraga, L., Mazouz, A., and Tournier, C. (2002). “Influence of the surface roughness on anisotropy in a turbulent boundary layer flow.” Exp. Fluids, 33, 497–499.
Keirsbulck, L., Mazouz, A., Labraga, L., and Tournier, C. (2001). “Influence of the surface roughness on the third-order moments of velocity fluctuations.” Exp. Fluids, 30, 592–594.
Keulegan, G. (1938). “Laws of turbulent flow in open channels.” J. Res. Natl. Bur. Stand., 21(6), 707–741.
Kirkgoz, M. S., and Ardiclioglu, M. (1997). “Velocity profiles of developing and developed open-channel flow.” J. Hydraul. Eng., 123(12), 1099–1105.
Krogstad, P., and Antonia, R. (1999). “Surface roughness effects in turbulent boundary layers.” Exp. Fluids, 27, 450–460.
Leonardi, S., Orlandi, P., Smalley, R. J., Djenidi, L., and Antonia, R. A. (2003). “Direct numerical simulations of turbulent channel flow with transverse square bars on one wall.” J. Fluid Mech., 491, 229–238.
Lu, S. S., and Willmarth, W. W. (1973). “Measurements of the structures of the Reynolds stress in a turbulent boundary layer.” J. Fluid Mech., 60, 481–571.
Mazouz, A., Labraga, L., and Tournier, C. (1994). “Behavior of Reynolds stress on rough wall.” Exp. Fluids, 17, 39–44.
Mierlo, M. C. L. M., and De Ruiter, J. C. C. (1988). “Turbulence measurements above artificial dunes.” Rep. Q789, Delft Hydraulics Laboratory, Delft, The Netherlands.
Muller, A., and Gyr, A. (1987). “On the vortex formation in the mixing layer behind bed forms.” J. Hydraul. Res., 24(5), 359–375.
Nakagawa, H., and Nezu, I. (1977). “Predictions of the contributions to the Reynolds stress from bursting events in open-channel flows.” J. Fluid Mech., 80(1), 99–128.
Nezu, I., and Rodi, W. (1986). “Open-channel flow measurements with a laser Doppler anemometer.” J. Hydraul. Eng., 112(5), 335–355.
Okamoto, S., Seo, S., Nakaso, K., and Kawai, I. (1993). “Turbulent shear flow and heat transfer over the repeated two-dimensional square ribs on ground plane.” ASME J. Fluids Eng., 115, 621–637.
Raupach, M. R. (1981). “Conditional statistics of Reynolds stress in rough-wall and smooth-wall turbulent boundary layers.” J. Fluid Mech., 108, 363–382.
Raupach, M. R., Antonia, R. A., and Rajagopalan, S. (1991). “Rough-wall turbulent boundary layers.” Appl. Mech. Rev., 44, 1–25.
Schwarz, A. C., Plesniak, M. W., and Murthy, S. N. B. (2002). “Response of turbulent boundary layers to multiple strain rates.” J. Fluid Mech., 458, 333–377.
Simpson, R., Chew, Y., and Shivaprasad, B. (1981). “The structure of a separating turbulent boundary layer. Part 2: Higher-order turbulence results.” J. Fluid Mech., 113, 53–73.
Smits, A. J., Spina, E. F., Alving, A. E., Smith, R. W., Fernando, E. M., and Donavan, J. F. (1989). “A comparison of the turbulence structure of subsonic and supersonic boundary layers.” Phys. Fluids A, 1, 1865–1875.
Tachie, M. F. (2001). “Open-channel turbulent boundary layers and wall jets on rough surfaces.” Ph.D. thesis, Univ. of Saskatchewan, Sask., Canada.
Townsend, A. A. (1976). The structure of turbulent shear flow, Cambridge University Press, Cambridge, U.K.
Yen, B. C. (2002). “Open channel flow resistance.” J. Hydraul. Eng., 128(1), 20–39.
Yoon, J. Y., and Patel, V. C. (1996). “Numerical model of turbulent flow over sand dune.” J. Hydraul. Eng., 122(1), 10–18.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jan 31, 2005
Accepted: Mar 3, 2006
Published online: Jan 1, 2007
Published in print: Jan 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.