Dam Break Wave of Thixotropic Fluid
Publication: Journal of Hydraulic Engineering
Volume 132, Issue 3
Abstract
Thixotropy is the characteristic of a fluid to form a gelled structure over time when it is not subjected to shearing, and to liquefy when agitated. Thixotropic fluids are commonly used in the construction industry (e.g., liquid concrete and drilling fluids), and related applications include some forms of mud flows and debris flows. This paper describes a basic study of dam break wave with thixotropic fluid. Theoretical considerations were developed based upon a kinematic wave approximation of the Saint-Venant equations down a prismatic sloping channel. A very simple thixotropic model, which predicts the basic rheological trends of such fluids, was used. It describes the instantaneous state of fluid structure by a single parameter. The analytical solution of the basic flow motion and rheology equations predicts three basic flow regimes depending upon the fluid properties and flow conditions, including the initial “degree of jamming” of the fluid (related to its time of restructuration at rest). These findings were successfully compared with systematic bentonite suspension experiments. The present work is the first theoretical analysis combining the basic principles of unsteady flow motion with a thixotropic fluid model and systematic laboratory experiments.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers thank Dr. Nicolas Roussel (Division BCC, LCPC Paris) for his valuable comments. They further acknowledge the technical assistance of the LMSGC.
References
Alderman, N. H., Meeten, G. H., and Sherwood, J. D. (1991). “Vane rheometry of bentonite gels.” J. Non-Newtonian Fluid Mech., 29, 291–310.
Balmforth, N. J., and Craster, R. V. (1999). “A consistent thin-layer theory for Bingham plastics.” J. Non-Newtonian Fluid Mech., 84, 65–81.
Besq, A. (2000). “Ecoulement laminaire de suspensions de bentonites industrielles. Caractérisation rhéométrique. Ecoulements en conduites axisymmétriques. Applications aux Activités du Génie Civil.” PhD thesis, Univ. of Poitiers, France.
Chanson, H., Coussot, P., Jarny, S., and Tocquer, L. (2004). “A study of dam break wave of thixotropic fluid: Bentonite surges down an inclined plane.” Rep. No. CH54/04, Dept. of Civil Engineering, The Univ. of Queensland, Brisbane, Australia.
Coussot, P. (1994). “Steady, laminar, flow of concentrated mud suspensions in open channel.” J. Hydraul. Res., 32, 535–559.
Coussot, P., Nguyen, A. D., Huynh, H. T., and Bonn, D. (2002a). “Avalanche behavior in yield stress fluids.” Phys. Rev. Lett., 88, 175501.
Coussot, P., Nguyen, A. D., Huynh, H. T., and Bonn, D. (2002b). “Viscosity bifurcation in thixotropic yielding fluids.” J. Rheol., 46, 573–589.
Ferroir, T., Huynh, H. T., Chateau, X., and Coussot, P. (2004). “Motion of a solid object through pasty (thixotropic) fluid.” Phys. Fluids, 16(3), 594–601.
Huang, X., and Garcia, M. (1998). “A Herschel–Bulkley model for mud flow down a slope.” J. Fluid Mech., 374, 305–333.
Hunt, B. (1982). “Asymptotic solution for dam-break problem.” J. Hydraul. Div., Am. Soc. Civ. Eng., 108(1), 115–126.
Hunt, B. (1984). “Perturbation solution for dam-break floods.” J. Hydraul. Eng., 110(8), 1058–1071.
Huynh, H. T., Bonn, D., and Coussot, P. (2001). “Caratérisation de la thixotropie de fluides pâteux.” (‘Thixotropic characteristics of pastes.’) Proc., 36th Colloque Annuel du Groupe Français de Rhéologie GFR, 72–77.
Julien, P. Y. (1995). Erosion and sedimentation, Cambridge University Press, Cambridge, UK.
Laigle, D., and Coussot, P. (1997). “Numerical modeling of mudflows.” J. Hydraul. Eng., 123(7), 617–623.
Liu, K. F., and Mei, C. C. (1989). “Slow spreading of a sheet of Bingham fluid on an inclined plane.” J. Fluid Mech., 207, 505–529.
Mei, C. C., and Yuhi, M. (2001). “Slow flow of a Bingham fluid in a shallow channel of finite width.” J. Fluid Mech., 431, 135–159.
Mewis, J. (1979). “Thixotropy—A general review.” J. Non-Newtonian Fluid Mech., 6, 1.
Roussel, N., Le Roy, R., and Coussot, P. (2004). “Thixotropy modeling at local and macroscopic scales.” J. Non-Newtonian Fluid Mech., 117(2–3), 85–95.
Tabuteau, H., Baudez, J. C., Bertrand, F., and Coussot, P. (2004). “Mechanical characteristics and origin of wall slip in pasty biosolids.” Rheol. Acta, 43, 168–174.
Toorman, E. A. (1997). “Modeling the thixotropic behavior of dense cohesive sediment suspensions.” Rheol. Acta, 36, 56.
Usui, H. (1995). “A thixotropy model for coal-water mixtures.” J. Non-Newtonian Fluid Mech., 60, 259.
Wan, Z., and Wang, Z. (1994). “Hyperconcentrated flow.” IAHR Monograph, Balkema, Rotterdam, The Netherlands.
Wilson, S. D. R., and Burgess, S. L. (1998). “The steady, spreading flow of a rivulat of mud.” J. Non-Newtonian Fluid Mech., 79, 77–85.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Sep 17, 2004
Accepted: Feb 11, 2005
Published online: Mar 1, 2006
Published in print: Mar 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.