Discussion of “Free Overfall in Inverted Semicircular Channels” by Subhasih Dey
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Hydraulic Engineering
Volume 130, Issue 11
0733-9429(2004)130:11(1126)/asset/eb8e7880-136b-49b9-ba1b-0ea9ff6d8fd8/assets/(asce)0733-9429(2004)130:11(1126).fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anastasiadou-Partheniou, L., and Hatzigiannakis, E. (1995). “General end-depth—discharge relationship at free overall in trapezoidal channel.” J. Irrig. Drain. Eng., 121(2), 143–151.
2.
Barenblatt, G.I. ( 1979). Similarity, self-similarity and intermediate asymptotics, Consultans Bureau, New York.
3.
Barenblatt, G.I. ( 1987). Dimensional analysis, Gordon and Breach Science, Amsterdam, The Netherlands.
4.
Bauer, S. W., and Graf, W. H. (1971). “Free overall as flow measuring device.” J. Irrig. Drain. Eng., 97(1), 73–83.
5.
Dey, S. (1998). “End depth in circular channels.” J. Hydraul. Eng., 124(8), 856–863.
6.
Dey, S. (2001). “EDR in circular channels.” J. Irrig. Drain. Eng., 127(2), 110–112.
7.
Diskin, M. H. (1961). “End depth at a drop in trapezoidal channels.” J. Hydraul. Div., Am. Soc. Civ. Eng., 87(4), 911–932.
8.
Fathy, A., and Shaarawi, M.A. ( 1954). “Hydraulics of the free overfall.” Proc., ASCE, 80, Proc. Sep. No. 564, New York.
9.
Ferreri, G.B., and Ferro, V. ( 1990). “Efflusso non guidato di una corrente lenta da un salto di fondo in canali a sezione rettangolare.” Proc. XII Convegno di Idraulica e Costruzioni Idrauliche, 195–213 (in Italian).
10.
Ferro, V. (1992). “Flow measurement with rectangular free overfall.” J. Irrig. Drain. Eng., 118(6), 956–964.
11.
Ferro, V. (1997). “Applying hypothesis of self-similarity for flow-resistance law of small-diameter plastic pipes.” J. Irrig. Drain. Eng., 123(3), 175–179.
12.
Ferro, V. (1999). “Theoretical end-depth-discharge relationship for free overfall.” J. Irrig. Drain. Eng., 125(1), 40–44.
13.
Ferro, V. (2000). “Closure to ‘Theoretical end-depth-discharge relationship for free overfall, by V. Ferro.” J. Irrig. Drain. Eng., 126(2), 136–138.
14.
Ferro, V. (2002). “Discussion of ‘EDR in circular channels,’ by S. Dey.” J. Irrig. Drain. Eng., 128(6), 401–404.
15.
Gill, M. A. (1979). “Hydraulics of rectangular vertical drop structures.” J. Hydraul. Res., 17(4), 289–302.
16.
Hager, W. H. (1983). “Hydraulics of plane free overfall.” J. Hydraul. Eng., 109(12), 1683–1697.
17.
Keller, R. J., and Fong, S. S. (1989). “Flow measurements with trapezoidal free overfall.” J. Irrig. Drain. Eng., 115(1), 125–136.
18.
Marchi, E. (1993). “On the free overfall.” J. Hydraul. Res., 31(6), 777–790.
19.
Paderi, F. (1954). “Sulla chiamata di sbocco (Notizie preliminari su rilevamenti per canali a fondo orizzontale.” Energ. Elettr., 10, 742–748. (in Italian).
20.
Pagliara, S., and Viti, C. ( 1995a). “Chiamata di sbocco in alvei con sezione trapezia.” La Ricerca e i Ricercatori della Facoltà di Ingegneria, Tipografia Editrice Pisana, 97–115 (in Italian).
21.
Pagliara, S., and Viti, C. (1995b). “Discussion of ‘Discharge prediction in smooth trapezoidal free overfall-(positive, zero and negative slopes),’ by R. D. Gupta, M. Jamil, and M. Mohsin.” J. Irrig. Drain. Eng., 121(1), 128–130.
22.
Peruginelli, A. (1980). “Chiamata di sbocco in sezione triangolare.” Idrotecnica, 6(2), 63–72 (in Italian).
23.
Rajaratnam, N., and Muralidhar, D. (1964a). “End depth for circular channels.” J. Irrig. Drain. Eng., 90(2), 90–119.
24.
Rajaratnam, N., and Muralidhar, D. (1964b). “End depth for exponential channels.” J. Irrig. Drain. Eng., 90(1), 17–39.
25.
Rajaratnam, N., and Muralidhar, D. (1970). “The trapezoidal free overfall.” J. Hydraul. Res., 8(4), 419–447.
26.
Rouse, H. (1936). “Discharge characteristic of the free overfall.” Civ. Eng. (N.Y.), 6(4), 257–260.
27.
Terzidis, G., and Anastasiadou-Partheniou, L. (1990). “Discussion of ‘Flow measurement with trapezoidal free overfall,’ by R. J. Keller, and S. S. Fong.” J. Irrig. Drain. Eng., 116(6), 860–862.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 130 • Issue 11 • November 2004
Pages: 1126 - 1128
Copyright
Copyright © 2004 ASCE.
History
Published online: Oct 15, 2004
Published in print: Nov 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.