Parameters Affecting the Performance of Wetting and Drying in a Two-Dimensional Finite Element Long Wave Hydrodynamic Model
Publication: Journal of Hydraulic Engineering
Volume 129, Issue 8
Abstract
The marsh porosity method, a type of thin slot wetting and drying algorithm in a two-dimensional finite element long wave hydrodynamic model, is discussed and analyzed to assess model performance. Tests, including comparisons to simple examples and theoretical calculations, examine the effects of varying the marsh porosity parameters. The findings demonstrate that the wetting and drying concept of marsh porosity, often used in finite element hydrodynamic modeling, can behave in a more complex manner than initially expected.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bates, P. D., and Hervouet, J.-M.(1999). “A new method for moving boundary hydrodynamic problems in shallow water.” Proc. R. Soc. London, Ser. A, 455, 3107–3128.
Balzano, A.(1998). “Evaluation of methods for numerical simulation of wetting and drying in shallow water flow models.” Coastal Eng., 34, 83–107.
Defina, A., and D’Alpaos, L. (1994). “A new set of equations for very shallow water and partially dry areas suitable to numerical models.” Modeling of Flood Propagation over Initially Dry Areas, Proc., Specialty Conf. Co-sponsored by ASCE-CNR/CNDCI-ENEL spa, Milan, Italy, ASCE, New York, 72–81.
Donnell, B. P., et al. (2001). User’s guide for RMA2 version 4.5, U.S. Army, Engineer Research and Development Center, Waterways Experiment Station, Coastal and Hydraulics Laboratory, Vicksburg, Miss.
Falconer, R. A., and Chen, Y.(1991). “An improved representation of flooding and drying and wind stress effects in a two-dimensional tidal numerical model.” Proc. I.C.E., Part 2, 91, 659–678.
Falconer, R. A., and Owens, P. H.(1987). “Numerical simulation of flooding and drying in a shallow water flow model.” Proc. I.C.E., Part 2, 83, 161–180.
Goodwin, P., Lewandowski, J., and Sobey, R. J. (1992). “Hydrodynamic simulation of small-scale tidal wetlands.” Proc., 2nd Int. Conf. on Hydraulic and Environmental Modeling of Coastal, Estuarine and River Waters, Bradford, U.K., Ashgate, 2, 149–161.
Gopalakrishnan, T.(1989). “A moving boundary circulation model for regions with large tidal flats.” Int. J. Numer. Methods Eng., 28, 245–260.
Hervouet, J. M., and Janin, J. M. (1994). “Finite element algorithms for modeling flood propagation.” Modeling of Flood Propagation over Initially Dry Areas, Proc., Specialty Conf. Co-sponsored by ASCE-CNR/CNDCI-ENEL spa, Milan, Italy, ASCE, New York, 102–113.
King, I. P. (2000). RMA2 Version 6.6 User Manual, Publication of Resource Management Associates, Inc., Suisun, Calif.
MacArthur, R. C., Dexter, J. R., Smith, D. J., and King, I. P. (1990). “Two dimensional finite element simulation of the flooding characteristics in Kawainui Marsh, Hawaii.” Proc., 1990 National Hydraulic Engineering Conf., ASCE, New York, 0-87262-774-8, 664–669.
Nielsen, C. (2000). “Finite element modeling in a coastal and marine environment.” MengSc (Res) thesis, Univ. of Queensland, Australia.
Roig, L. C., and Evans, R. A. (1993). “Environmental modeling of coastal wetlands.” Proc., 3rd Int. Conf. on Estuarine and Coastal Modeling III, ASCE, New York, 0-87262-975-9, 522–535.
Smagorinsky, J.(1963). “General circulation experiments with the primitive equations.” Mon. Weather Rev., 91, 91–164.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Apr 16, 2002
Accepted: Mar 10, 2003
Published online: Jul 15, 2003
Published in print: Aug 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.