Numerical Modeling of Bed Evolution in Channel Bends
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 128, Issue 5
Abstract
A two-dimensional numerical model is developed to predict the time variation of bed deformation in alluvial channel bends. In this model, the depth-averaged unsteady water flow equations along with the sediment continuity equation are solved by using the Beam and Warming alternating-direction implicit scheme. Unlike the present models based on Cartesian or cylindrical coordinate systems and steady flow equations, a body-fitted coordinate system and unsteady flow equations are used so that unsteady effects and natural channels may be modeled accurately. The effective stresses associated with the flow equations are modeled by using a constant eddy-viscosity approach. This study is restricted to beds of uniform particles, i.e., armoring and grain-sorting effects are neglected. To verify the model, the computed results are compared with the data measured in 140° and 180° curved laboratory flumes with straight reaches up- and downstream of the bend. The model predictions agree better with the measured data than those obtained by previous numerical models. The model is used to investigate the process of evolution and stability of bed deformation in circular bends.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chaudhry, M. H. (1993). Open-channel flow, Prentice-Hall, Englewood Cliffs, N.J.
El-Khudairy, M. (1970). “Stable bed profiles in continuous bend.” PhD thesis, Univ. of California, Berkeley, Calif.
Engelund, F.(1974). “Flow bed topography in channel bend.” J. Hydraul. Div., Am. Soc. Civ. Eng., 100(11), 1631–1648.
Engelund, F., and Hansen, E. (1967). A monograph on sediment transport in alluvial streams, Teknisk, Copenhagen, Denmark.
Jansen, P. Ph. (1979). Principles of River Engineering, Pitman, London.
Kassem, A. A., and Chaudhry, M. H.(1998). “Comparison of coupled and semicoupled numerical models for alluvial channels.” J. Hydraul. Eng., 124(8), 794–802.
Kikkawa, H., Ikeda, S., and Kitagawa, A.(1976). “Flow and bed topography in curved open channels.” J. Hydraul. Div., Am. Soc. Civ. Eng., 102(9), 1327–1342.
Koch, F. G., and Flokstra, C. (1981). “Bed level computations for curved alluvial channels.” Proc., XIXth Congress of the Int. Assoc. for Hydaul. Res., New Delhi, India, 2, 357.
Kuipers, J., and Vreugdenhil, C. B. (1973). “Calculations of two-dimensional horizontal flow.” Rep. No. S 163, Delft Hydraulics Laboratory, Part 1.
Leopold, L. B., Wolman, M. G., and Miller, J. P. (1964). Fluvial Processes in Geomorphology, Freeman, San Francisco.
Molls, T., and Chaudhry, M. H.(1995). “Depth-averaged open-channel flow model.” J. Hydraul. Eng., 121(6), 453–465.
Nelson, J. M., and Smith, J. D. (1989). “Evolution and stability of erodible channel beds.” River meandering, S. Ikeada, and G. Parker, eds., Am. Geophys. Union Monograph, Washington, D.C.
Odgaard, A. J.(1981). “Transverse bed slope in alluvial channel bends.” J. Hydraul. Div., Am. Soc. Civ. Eng., 107(12), 1677–1694.
Rozovskii, I. L. (1961). “Flow of water in bends of open channels.” Rep. No. OTS 60-51133, Y. Prushansky, translation, Office of Technical Service, U.S. Dept. of Commerce, Washington, D.C.
Shimizu, Y., and Itakura, T.(1989). “Calculation of bed variation in alluvial channels.” J. Hydraul. Div., Am. Soc. Civ. Eng., 115(3), 367–384.
Struiksma, N. (1983). “Results of movable bed experiments in the DHL curved flume.” Report on Experimental Investigation, TWO Rep. No. R657-XVIII/M1771, Delft Hydraulics Laboratory, Delft, The Netherlands.
Struiksma, N.(1985). “Prediction of 2D bed topography in rivers.” J. Hydraul. Eng., 111(8), 1169–1182.
Struiksma, N., Olsen, K. W., Flokstra, C., and De Vriend, H. J.(1985). “Bed deformation in curved alluvial channels.” J. Hydraul. Res., 23(1), 57–79.
Sutmuller, A. M., and Glerum, H. L. (1980). “Description and evaluation of measurements carried out in a bend flume with sand bed (in Dutch).” Rep. No. 14710101, Delft Univ. of Technology, Dept. of Civil Engineering, Delft, The Netherlands.
Younus, M., and Chaudhry, M. H.(1994). “A depth-averaged model for the computation of free-surface flow.” J. Hydraul. Res., 32(3), 415–443.
Zimmermann, C., and Kennedy, J. F.(1978). “Transverse bed slope in curved alluvial streams.” J. Hydraul. Div., Am. Soc. Civ. Eng., 104(1), 33–48.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Jul 7, 1998
Accepted: Sep 24, 2001
Published online: Apr 15, 2002
Published in print: May 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.