Monitoring River Channel and Flume Surfaces with Digital Photogrammetry
Publication: Journal of Hydraulic Engineering
Volume 127, Issue 10
Abstract
This paper describes and illustrates a technique for high resolution monitoring of the surface morphology of water-worked sediments. The monitoring uses close-range digital photogrammetry. While photogrammetry is a long-established technique, more recent developments in digital photogrammetry allow application in fluvial research to be highly cost effective in both flume and natural river channel studies. Results are presented that involve two scales of laboratory flume: a smaller-scale application associated with sediment sorting processes in a straight channel; and a larger-scale application involving sediment transport and bed material feedbacks in a meandering channel subject to overbank flows. A preliminary assessment of data quality is undertaken with encouraging results. The precision of elevation estimates corresponds to the scale of the imagery acquired and hence may be controlled by design of the image acquisition process.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albertz, J., and Kreiling, J. ( 1975). Photogrammetric guide, Herbert Wichmann Verlag, Karlsruhe, Germany.
2.
Atkinson, K. B., ed. ( 2000). Close range photogrammetry and machine vision, Whittles Publishing.
3.
Baltsavias, B. P. ( 1994). “Test and calibration procedures for image scanners.” Int. Arch. Photogramm. & Remote Sensing, 30(1), 163–170.
4.
Barker, R., Dixon, L., and Hooke, J. M. ( 1997). “Use of terrestrial photogrammetry for monitoring and measuring bank erosion.” Earth Surface Processes and Landforms, 22, 1217–1227.
5.
Butler, J. B., Lane, S. N., and Chandler, J. H. ( 1998). “Assessment of DEM quality characterizing surface roughness using close range digital photogrammetry.” Photogrammetric Rec., 16, 271–291.
6.
Chandler, J. H., Lane, S. N., and Ashmore, P. ( 2000). “Measuring river-bed and flume morphology and parameterising bed roughness with a Kodak DCS460 digital camera.” Int. Arch. Photogramm. & Remote Sensing, (in press).
7.
Chandler, J. H., Shiono, K., Rameshwaren, P., and Lane, S. N. ( 2001). “Automated DEM extraction for hydraulics research.” Photogrammetric Rec., 17, 39–61.
8.
Collins, S. H., and Moon, G. C. ( 1979). “Stereometric measurement of streambank erosion.” Photogrammetric Engrg. and Remote Sensing, 45, 183–190.
9.
Dixon, L. F. J., et al. ( 1998). “Chapter 4: Analytical photogrammetry for geomorphological research.” Landform monitoring, modelling and analysis, S. N. Lane, K. S. Richards, and J. H. Chandler, eds., Wiley, Chichester, U.K., 63–94.
10.
Fraser, C. S., and Shortis, M. R. ( 1995). “Metric exploitation of still video imagery. Photogrammetric Rec., 15, 107–122.
11.
Fraser, C. S. ( 1997). “Digital camera self-calibration.” ISPRS J. Photogrammetry and Remote Sensing, 52, 149–159.
12.
Ganci, G., and Shortis, M. R. ( 1996). “A comparison of the utility and efficiency of digital photogrammetry and industrial theodolite systems.” Int. Arch. of Photogrammetry and Remote Sensing, 31(B5), 182–187.
13.
Ghosh, S. K. ( 1988). Analytical photogrammetry, 2nd Ed., Pergamon, New York.
14.
Lane, S. N. ( 1998). “Chapter 14: The use of digital terrain modelling in the understanding of dynamic river channel systems.” Landform monitoring, modelling and analysis, S. N. Lane, K. S. Richards, and J. H. Chandler, eds., Wiley, Chichester, U.K., 311–342.
15.
Lane, S. N., Chandler, J. H., and Richards, K. S. ( 1994). “Developments in monitoring and terrain modelling small-scale river-bed topography.” Earth Surface Processes and Landforms, 19, 349–398.
16.
Lane, S. N., Richards, K. S., and Chandler, J. H. ( 1996). “Discharge and sediment supply controls on erosion and deposition in a dynamic alluvial channel.” Geomorphology, 15, 1–15.
17.
Painter, R. B., Blyth, K., Mosedale, J. C., and Kelly, M. ( 1974). “The effect of afforestation on erosion processes and sediment yield.” Effects of man on the interface of the hydrological cycle with the physical environment, International Association of Hydrological Sciences, Wallingford, U.K., 62–68.
18.
Peipe, J., and Schneider, C. T. ( 1995). “High resolution still video camera for industrial photogrammetry.” Photogrammetric Rec., 15, 135–139.
19.
Pyle, C. J., Richards, K. S., and Chandler, J. H. ( 1997). “Digital photogrammetric monitoring of river bank erosion.” Photogrammetric Res., 15, 753–764.
20.
Schenk, T., Li, J.-C., and Toth, C. ( 1991). “Towards an autonomous system for orienting digital stereopairs.” Photogrammetric Engrg. and Remote Sensing, 57, 1057–1064.
21.
Shortis, M. R., Robson, S., and Beyer, H. A. ( 1998). “Principal point behavior and calibration models for Kodak DCS cameras.” Photogrammetric Rec., 16(92), 165–186.
22.
Slama, C. C. ( 1980). The manual of photogrammetry, 4th Ed., American Society of Photogrammetrists, Falls Church, Va.
23.
Stojic, M., Chandler, J. H., Ashmore, P., and Luce, J. ( 1998). “The assessment of sediment transport rates by automated digital photogrammetry. Photogrammetric Engrg. and Remote Sensing, 64, 387–395.
24.
Willetts, B. B., Pender, G., and McEwan, I. K. ( 1998). “Experiments on the transport of graded sediment.” Proc., Inst. of Civ. Engrs.—Water, Maritime and Energy, London, 130, 217–225.
Information & Authors
Information
Published In
History
Received: Dec 20, 1999
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.