Hydraulics of Embankment Weirs
Publication: Journal of Hydraulic Engineering
Volume 124, Issue 9
Abstract
Embankment weirs, often found in engineering applications with a side slope 1V:2H, are considered in this paper. For free overflow, the discharge coefficient is determined in terms of relative crest length for long broad-crested, broad-crested, short-crested, and thin-crested weirs. A considerable increase of capacity is noted when compared to broad-crested weirs with vertical faces. For submerged overflow, four regimes are identified: (1) A-jump; (2) plunging jet; (3) surface wave; and (4) surface jet. Particular attention is focused on plunging jets and surface waves. The flow regimes are discussed in terms of submergence, crest length, and modular limit. A description is given of the forward and backward (recirculation) zones with indications of typical lengths. Also, the entire velocity field is described, including the maximum forward and backward velocities, and the velocity distribution in arbitrary sections of the tailwater region. It is found that plunging jets and surface jets are hydraulically similar, and that the profile of one regime can be transformed into the other profile by inversion about the median. All results are generalized and can be directly applied.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bazin, H. (1898). “Expériences nouvelles sur l'écoulement en déversoir (6e article).”Annales des Ponts et Chaussées, 68(2), 151–265 (in French).
2.
Bos, M. G. (1976). “Discharge measurement structures.”Rapport 4. Laboratorium voor Hydraulica an Afvoerhydrologie, Landbouwhogeschool, Wageningen, The Netherlands.
3.
Bretschneider, H. (1961). “Abflussvorgänge bei Wehren mit breiter Krone,” Dissertation, Mitteilung 53, Institut für Wasserbau und Wasserwirtschaft, Technische Universität, Berlin (in German).
4.
Escande, L. (1939). “Recherches nouvelles sur les barrages déversoirs noyés.”La Technique Moderne, 31(18), 617–620 (in French).
5.
Govinda Rao, N. S., and Muralidhar, D. (1961). “A new discharge formula for waste-weirs (bye washes).”Irrigation and Power, 18(10), 908–917; 19(7), 546–549.
6.
Hager, W. H. (1992). Energy dissipators and hydraulic jump. Kluwer Academic Publishers, Dordrecht, The Netherlands.
7.
Hager, W. H., and Schwalt, M.(1992). “Broad-crested weir.”J. Irrig. and Drain. Engrg., ASCE, 120(1), 13–26.
8.
Hager, W. H., Reinauer, R., and Lauber, G. (1994). “Wenn die Absturzströmung zur Todesfalle wird.”Schweizer Ingenieur und Architekt, 112(38), 738–741 (in German).
9.
Horton, R. E. (1907). “Weir experiments, coefficients, and formulas.”Water Supply and Irrigation Paper 200. U.S. Dept. of Interior, Government Printing Office, Washington, D.C.
10.
Hulsing, H. (1968). Measurement of peak discharge at dams by indirect methods. Techniques of Water Resources Investigations, U.S. Geological Survey, Book 3(A5). U.S. Government Printing Office, Washington, D.C.
11.
Kikkawa, H., Ashida, K., and Tsuchiya, A.(1961). “Study on the discharge coefficient of broad-crested weirs.”J. Res. of Public Works Res. Inst., Japan, 5(4), 1–20.
12.
Kindsvater, C. E. (1964). Discharge characteristics of embankment-shaped weirs. Geological Survey Water Supply Paper 1617-A, U.S. Government Printing Office, Washington, D.C.
13.
Laskhmana Rao, N. S.(1975). “Theory of weirs.”Advances in Hydroscience, 10, 309–406.
14.
Leutheusser, H. J., and Birk, W. M. (1991). “Drownproofing of low overflow structures.”J. Hydr. Engrg., ASCE, 117(2), 205–213; 118(11), 1586–1589.
15.
Miller, D. S. (1994). “Discharge characteristics.”IAHR Hydraulic Structures Design Manual 8, D. S. Miller, ed., Balkema, Rotterdam, The Netherlands.
16.
Pinto, N. L. de S., and Ota, J. J. (1980). “Distribuicao das pressoes na face de jusante das barragens de enrocamento submersas—Investigatio experimental.”9 Congresso Latinoamericano Hidraulica, Merida E(3), 1–12 (in Portuguese).
17.
Rajaratnam, N(1965). “The hydraulic jump as a wall jet.”J. Hydr. Div., ASCE, 91(3), 107–132.
18.
Rajaratnam, N., and Muralidhar, D.(1969). “Flow below deeply submerged rectangular weirs.”J. Hydr. Res., 7(3), 355–374.
19.
Ranga Raju, K. G., Srivastava, R., and Porey, P. D.(1990). “Scale effects in modelling flows over broad-crested weirs.”Irrigation and Power, 47(3), 101–106.
20.
Wu, S., and Rajaratnam, N.(1996). “Submerged flow regimes of rectangular sharp-crested weirs.”J. Hydr. Engrg., ASCE, 122(7), 412–414.
21.
Yarnell, D. L., and Nagler, F. A.(1930). “Flow of flood water over railway and highway embankments.”Public Roads, 11(2), 30–34.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Sep 1, 1998
Published in print: Sep 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.