Hybrid Model for Prediction of Initial Dilutions from Outfall Discharges
Publication: Journal of Hydraulic Engineering
Volume 124, Issue 12
Abstract
We present a model for predicting the behavior of a buoyant discharge in a cross-flow. The model is developed through a hybrid of the length scale and integral approaches. We compare the predictions of the hybrid model with a range of experimental data. In addition we compare the predictions of our model with those from two existing models: the expert system CORMIX1 and the Lagrangian integral model JETLAG. Through these comparisons we are able to show that the hybrid model predicts, with reasonable accuracy, the behavior of effluent discharged at a variety of angles to the ambient current. The hybrid model retains the flexibility of a length-scale model enabling it to be developed more readily to deal with complex flow configurations, such as the staged merging of small groups of discharges. In addition because the model utilizes integral solutions it requires less empirical information to develop than an equivalent length-scale model, which relies solely on dimensional analysis. Through this study we also are able to identify several areas of single-discharge behavior, which are not well understood and require further investigation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ayoub, G. M. (1971). “Dispersion of buoyant jets in a flowing ambient fluid,” PhD thesis, Department of Civil Engineering, Imperial College of Science and Technology, University of London.
2.
Baumgartner, D. J., Frick, W. E., and Roberts, P. J. W. (1993). “Dilution models for effluent discharges (second edition).”Rep. No. EPA/600-R-93/139, U.S. Environmental Protection Agency, ERL-Narragansett, Newport, Ore.
3.
Cheng, C. W., Davidson, M. J., and Wood, I. R.(1992). “Merging buoyant discharges in an ambient current.”J. Hydr. Res., Delft, The Netherlands, 30(3), 361–372.
4.
Chu, V. H. (1975). “Three-dimensional forced plumes in a laminar crossflow.”Proc., 15th IAHR Congr., Internation Association for Hydraulic Research, Delft, The Netherlands, 31–39.
5.
Chu, V. H.(1977). “A line-impulse model for buoyant jets in a crossflow.”Heat Transfer and Buoyant Convention, 1, 263–279.
6.
Chu, V. H., and Goldberg, M. B.(1974). “Buoyant forced plumes in crossflow.”J. Hydr. Div., ASCE, 100(9), 1203–1214.
7.
Chu, V. H., and Lee, J. H. W.(1996). “General integral formulation of turbulent buoyant jets in cross-flow.”J. Hydr. Engrg., ASCE, 122(1), 27–34.
8.
Davidson, M. J. (1989). “The behavior of single and multiple, horizontally discharged, buoyant flows in a non-turbulent coflowing ambient fluid,” PhD thesis, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
9.
Davidson, M. J., Wang, Y., and Pun, K. L. (1995). “A length-scale model for the merging of jets in a coflow.”Proc. 10th ASCE Engrg. Mech. Conf., ASCE, New York, 215–218.
10.
Davidson, M. J., Wood, I. R., and Knudsen, M.(1991). “The behaviour of a single, horizontally discharged, buoyant flow in a non-turbulent coflowing ambient fluid.”J. Hydr. Res., Delft, The Netherlands, 29(4), 545–566.
11.
Doneker, R. L., and Jirka, G. H. (1990). “Expert system for hydrodynamic mixing zone analysis of conventional and toxic submerged single port discharges (CORMIX1).”Rep. No. EPA/600/3-90/012, U.S. Environmental Protection Agency, Washington, D.C.
12.
Fan, L. N. (1967). “Turbulent buoyant jets into stratified or flowing ambient fluids.”Rep. No. KH-R-15, W. M. Keck Laboratory of Hydraulic and Water Resources, California Institute of Technology, Pasadena, Calif.
13.
Fisher, H. B., List, E. J., Koh, R. C. Y., Imberger, J., and Brooks, N. H. (1979). Mixing in inland and coastal waters, Academic Press, New York.
14.
Knudsen, M. (1988). “Buoyant horizontal jets in an ambient flow.” PhD thesis, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
15.
Lee, J. H. W., and Cheung, V.(1991). “Generalized Lagrangian model for buoyant jets in current.”J. Envir. Engrg., ASCE, 116(6), 1085–1106.
16.
Lee, J. H. W., and Neville-Jones, P.(1987). “Initial dilution of horizontal jet in crossflow.”J. Hydr. Engrg., ASCE, 113(5), 615–629.
17.
Muellenhoff, W. P., Soldate Jr., A. M., Baumgartner, D. J., Schuldt, M. D., Davis, L. R., and Frick, W. E. (1985). “Initial mixing characteristics of municipal discharges, Vols. I and II.”Rep. No. EPA-60/3-85-073a, U.S. Environmental Protection Agency, Newport, Ore.
18.
Papanicolaou, P. N. (1984). “Mass and momentum transport in a turbulent buoyant vertical axisymmetric jet,” PhD thesis, W. M. Keck Laboratory of Hydraulic Resources, Division of Engineering and Applied Science, California Institute of Technology, Pasadena, Calif.
19.
Patel, Rajni P. (1971). “Turbulent jets and wall jets in uniform streaming flow.”Aeronautical Quarterly, XXII, 311–326.
20.
Pun, K. L. (1998). “Hybrid models for jets and plumes in a flowing ambient fluid,” PhD thesis, Department of Civil and Structural Engineering, Hong Kong University of Science and Technology, Hong Kong.
21.
Pun, K. L., and Davidson, M. J. (1996). “Single and multiple point length-scale models for axisymmetric jets in a coflow.”Proc., 9th Int. Symp. on Transport Phenomena in Thermal-Fluids Engrg., Pacific Centre of Thermal-Fluids Engineering, Singapore, 755–760.
22.
Tsanis, I. K., and Valeo, C. (1994). “Mixing zone models for submerged discharges.”Environmental hydraulics, Vol. I, Computational Mechanics Publications, Southampton, Boston, Mass.
23.
Wood, I. R.(1993). “Asymptotic solutions and behavior of outfall plumes.”J. Hydr Engrg., ASCE, 119(5), 555–580.
24.
Wood, I. R., Bell, R. G., and Wilkinson, D. L. (1994). Ocean disposal of wastewater. World Scientific, Singapore.
25.
Wright, S. J. (1977). “Effects of ambient crossflow and density stratification on the characteristic behavior of round turbulent buoyant jets.”Rep. No. KH-R-36, W. M. Keck Laboratory of Hydraulic and Water Resources, California Institute of Technology, Pasadena, Calif.
26.
Wright, S. J. (1994). “The effect of ambient turbulence on jet mixing.”Recent research advances in the fluid mechanics of turbulent jets and plumes, Kluwer Academic Publishers, Boston, Mass., 13–27.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Dec 1, 1998
Published in print: Dec 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.