Quasi–Two-Dimensional Simulation of Scour and Deposition in Alluvial Channels
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 123, Issue 7
Abstract
Most existing sediment routing models are one-dimensional models and hence they cannot be used to simulate lateral channel bed deformations. Conversely, a two-dimensional model is computationally time consuming, and is not suitable for long-term simulation. Using the stream tube concept, a one-dimensional model is extended to a quasi–two-dimensional model in this study. It is capable of simulating lateral variations of channel cross section through the adjustments of stream tube boundaries. The model has an option to treat the suspended load and bed load separately and hence is able to simulate the deposition behavior of the suspended sediment under a nonequilibrium process. The model also provides options to solve either de Saint Venant equation or energy equation and hence can be applied in both steady and unsteady flow conditions. An assessment of this model's performance has been conducted through a comparison to an analytical solution and a set of experimental data. The application of this model to the Keelung River and the Shiemen Reservoir in Taiwan also gave convincing results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ackers, P., and White, W. R.(1973). “Sediment transport: a new approach and analysis.”J. Hydr. Div., ASCE, 99(11), 2041–2060.
2.
Bennet, J. P., and Nordin, C. F. (1977). “Simulation of sediment transport and armouring.”Hydro. Sci. Bull., XXII.
3.
Chang, H. H., and Hill, J. C.(1976). “Computer modelling of erodible flood channels and deltas.”J. Hydr. Div., ASCE, 102(10), 132–140.
4.
Cunge, J. A., Holly, F. M., and Verwey Jr., A. (1980). “Practical aspects of computational river hydraulics.”Int. Inst. for Hydr. and Envir. Engrg., Delft, The Netherlands.
5.
Elder, J. W.(1959). “The dispersion of marked fluid in turbulent shear flow.”J. Fluid Mech., 5, 544–560.
6.
Engelund, F., and Hanson, E. (1967). “A monograph on sediment transport in alluvial streams.”Tekmish Forlag, Tech. Press, Copenhagen, Denmark.
7.
Holly, F. M., and Preissmann, A.(1977). “Accurate calculation of transport in two dimensions.”J. Hydr. Div., ASCE, 103(11), 1259–1277.
8.
Holly, F. M., and Rahuel, J. L.(1990). “New numerical physical framework for mobile-bed modeling.”J. Hydr. Res., IAHR, 28(4), 401–416.
9.
Holly, F. M., Yang, J. C., Schovarz, P., Scheefer, J., Hsu, S. H., and Einhellig, R. (1990). “CHARIMA numerical simulation of unsteady water and sediment movements in multiply connected networks of mobile-bed channels.”IIHR Rep. No. 343, The Univ. of Iowa, Iowa City, Iowa.
10.
Holly, F. M., Yang, J. C., and Spasojevic, M. (1985). “Numerical simulation of water and sediment movement in multi-connected networks of mobile bed.”Iowa Inst. of Hydr. Res., Limited Distribution Rep. No. 131, The Univ. of Iowa, Iowa City, Iowa.
11.
Karim, M. F., and Kennedy, J. F. (1982). “IALLUVIAL: a computer-based flow and sediment routing for alluvial streams and its application to the Missouri River.”Iowa Inst. of Hydr. Res., Rep. No. 250, The Univ. of Iowa, Iowa City, Iowa.
12.
Lee, H. Y., and Yu, W. S. (1991). “An experimental study on reservoir sedimentation.”Hydr. Res. Lab. Rep., Nat. Taiwan Univ., Taiwan, R.O.C. (in Chinese).
13.
Meyer-Peter, E., and Müller, R. (1948). “Formulas for bed-load transport.”IAHR, 2nd Meeting, Stockholm, Sweden.
14.
Molinas, A., and Yang, C. T. (1986). Computer program user's manual for GSTARS. U.S. Dept. of Interior Bureau of Reclamation Engrg. and Res. Ctr., Denver, Colo.
15.
Simons & Li Assoc., Inc. (1980). Scour and sediment analysis of the proposed channel of the Salt River for protection of the Sky Harbor International Airport in Phoenix, Arizona. Howards, Needles, Tammon, and Bergondoff, Kansas City, Missouri.
16.
Spasojevic, M., and Holly, F. M. (1988). “Numerical simulation of two-dimensional deposition and erosion patterns in alluvial water bodies.”IIHR Rep. No. 149, The Univ. of Iowa, Iowa City, Iowa.
17.
Thomas, W. A., and Mcanally Jr., W. H. (1985). User's manual for the generalized computer program system open channel flow and sedimentation TABS-2. Dept. of the Army Wtrwy. Experiment Station, Corps of Engineers, Vicksburg, Mississippi.
18.
Thomas, W. A., and Prashum, A. L. (1977). “Mathematical model of scour and deposition.”J. Hydr. Div., ASCE 110(11), 1613–1641.
19.
Van Rijn, L. C.(1984). “Sediment transport, part II: suspended load transport.”J. Hydr. Engrg., ASCE, 110(11), 1613–1641.
20.
Yang, C. T.(1973). “Incipient motion and sediment transport.”J. Hydr. Div., ASCE, 99(10), 1679–1704.
21.
Yang, C. T.(1984). “Unit stream power equation for gravel.”J. Hydr. Engrg., ASCE, 110(12), 1679–1704.
22.
Yang, J. C., and Hsu, E. L. (1990). “Time-line interpolation for solution of the dispersion equation.”J. Hydr. Res., 28(4).
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jul 1, 1997
Published in print: Jul 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.