Experiments on Downstream Fining of Gravel: I. Narrow-Channel Runs
Publication: Journal of Hydraulic Engineering
Volume 123, Issue 10
Abstract
We present the results of three laboratory experiments in which longitudinally sorted deposits were formed by feeding poorly sorted sediment at the upstream end of a narrow, 45-m-long channel. The input sediment had a median size of 6 mm and included significant amounts of material up to 64 mm and down to 0.2 mm. Water discharge was constant at 49 L/s and sediment discharge varied from 0.048 to 0.19 kg/s. Downstream fining was produced in all three runs; the variation in sediment-feed rate had relatively little effect on the fining profiles. In all three runs, the formation of a longitudinally sorted deposit was mediated by the formation of a coarse surface layer. The surface layer remained at the top of the deposit during aggradation by continually reforming itself at the deposit surface. The coarse surface layer fined by approximately a factor of 2 in D90 and D50 consistently in all three experiments. The deposit (subsurface) fined less, with D90 fining more strongly than D50. The short channel length and the relatively high rate of deposition rule out clast abrasion as the source of fining. The experiments suggest that selective deposition of the coarsest clasts due to unequal mobility is capable of producing fining rates comparable with the highest rates observed in nature.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abbott, P. L., and Peterson, G. L.(1978). “Effects of abrasion durability on conglomerate clast populations: examples from Cretaceous and Eocene conglomerates of the San Diego Area, California.”J. Sediment Petrol., 48, 31–42.
2.
Andrews, E. D.(1983). “Entrainment of gravel from naturally sorted riverbed material.”Geol. Soc. Am. Bull., 94, 1225–1231.
3.
Andrews, E. D., and Erman, D. C.(1986). “Persistence in the size distribution of surficial bed material during an extreme snowmelt flood.”Water Resour. Res., 22, 191–197.
4.
Ashworth, P. J., and Ferguson, R. I.(1989). “Size-selective entrainment of bed load in gravel bed streams.”Water Resour. Res., 25, 627–634.
5.
Bradley, W. C.(1970). “Effect of weathering on abrasion of granitic gravel, Colorado River (Texas).”Geol. Soc. Am. Bull., 81, 61–80.
6.
Brierley, G. J., and Hickin, E. J.(1985). “The downstream gradation of particle sizes in the Squamish River, British Columbia.”Earth Surf. Proc. Landforms, 10, 597–606.
7.
Church, M. A., McLean, D. G., and Wolcott, J. F. (1987). “River bed gravels: sampling and analysis.”Sediment transport in gravel bed rivers, C. R. Thorne, J. C. Bathurst, and R. D. Hey, eds., John Wiley & Sons, Inc., New York, N.Y., 43–79.
8.
Egiazaroff, I. V.(1965). “Calculation of nonuniform sediment concentrations.”J. Hydr. Div., ASCE, 91(4), 225–247.
9.
Einstein, H. A. (1950). “The bed-load function for sediment transport in open channel flows.”U.S. Dept. Agric. Tech. Bull.
10.
Ferguson, R. I., Prestegaard, K. L., and Ashworth, P. J.(1989). “Influence of sand on hydraulics and gravel transport in a braided gravel bed river.”Water Resour. Res., 25, 635–643.
11.
Hooke, R. L. (1965). “Alluvial fans,” PhD thesis, California Inst. Technology, Pasadena, Calif.
12.
Klingeman, P. C., Chaquette, C. J., and Hammond, S. B. (1979). Bed material characteristics near Oak Creek sediment research facilities, 1978–1979. Water Resources Research Institute, Oregon State University, Corvallis, Oreg.
13.
Kodama, Y., Ikeda, H., and Iijima, H.(1992). “Longitudinal sediment sorting along a concave upward stream profile in a large flume.”Bull. of the Envir. Res. Ctr., Tsukuba Univ., Japan, 16, 119–123.
14.
Komar, P. D.(1987). “Selective grain entrainment by a current from a bed of mixed sizes: a reanalysis.”J. Sediment. Petrol., 57, 203–211.
15.
Krumbein, W. C.(1941). “The effects of abrasion on the size, shape, and roundnes of rock fragments.”J. Geol., 49, 482–520.
16.
Kuenen, P. H.(1956). “Experimental abrasion of pebbles. 2. Rolling by current.”J. Geol., 64, 336–368.
17.
Paola, C., Parker, G., Seal, R., Sinha, S. K., Southard, J. B., and Wilcock, P. R.(1992). “Downstream fining by selective deposition in a laboratory flume.”Sci., 258, 1757–1760.
18.
Parker, G.(1991). “Selective sorting and abrasion of river gravel. II: Applications.”J. Hydr. Engrg., ASCE, 117(2), 150–171.
19.
Parker, G., Klingeman, P. C., and McLean, D. L.(1982). “Bedload and size distribution in paved gravel-bed streams.”J. Hydr. Div., ASCE, 108(4), 544–571.
20.
Plumley, W. J.(1948). “Black Hills terrace gravels: a study in sediment transport.”J. Geol., 56, 526–577.
21.
Sambrook Smith, G. H., and Ferguson, R. I. (1995). “The gravel-sand transition along river channels.”J. Sedimentary Res., A65(2).
22.
Schlee, J.(1957). “Upland gravels of southern Maryland.”Geol. Soc. Am. Bull., 68, 1371–1430.
23.
Schumm, S. A., and Stevens, M. A.(1973). “Abrasion in place: a mechanism for rounding and size reduction of coarse sediments in rivers.”Geology, 1, 37–40.
24.
Seal, R., Parker, G., Paola, C., and Mullenbach, B. (1995). Laboratory experiments on downstream fining of gravel, narrow channel runs 1 through 3: supplemental methods and data. St. Anthony Falls Hydraulic Laboratory.
25.
Shaw, J., and Kellerhals, R. (1982). The composition of recent alluvial gravels in Alberta river beds. Alberta Research Council Bulletin 41, Calgary.
26.
Sternberg, H.(1875). “Untersuchungen über Längen und Querprofil geschiebeführnde Flüsse.”Z. Bauwesen, 25, 483–506.
27.
Straub, L. G.(1935). “Some observations of sorting of river-sediments.”Trans. A. G. U. Ann. Meeting, 16, 463–467.
28.
Toro-Escobar, C. M., Parker, G., and Paola, C. (1997). “Transfer function for the deposition of poorly sorted gravel in response to streambed aggradation.”J. Hydr. Res. (in press).
29.
Wiberg, P. L., and Smith, J. D.(1987). “Calculation of the critical shear stress for motion of uniform and heterogeneous sediments.”Water Resour. Res., 23, 471–489.
30.
Wilcock, P. R., and Southard, J. B.(1988). “Experimental study of incipient motion in mixed-size sediment.”Water Resour. Res., 24, 1137–1151.
31.
Wilcock, P. R., and Southard, J. B.(1989). “Bed-load transport of mixed-size sediment: fractional transport rates, bed forms, and the development of a coarse bed-surface layer.”Water Res. Res., 25, 1629–1641.
32.
Wolcott, J., and Church, M.(1991). “Strategies for sampling spatially heterogeneous phenomena: The example of river gravels.”J. Sedimentary Petr., 61(4), 534–543.
33.
Wolman, M. G.(1954). “A method of sampling coarse river-bed material.”Trans. Am. Geophys. Union, 35(6), 951–956.
34.
Yatsu, E.(1955). “On the longitudinal profile of the graded river.”Trans. Am. Geophys. Union, 36, 655–663.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Oct 1, 1997
Published in print: Oct 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.