Two-Dimensional Flow Model for Trapezoidal High-Velocity Channels
Publication: Journal of Hydraulic Engineering
Volume 123, Issue 10
Abstract
A two-dimensional numerical flow model for trapezoidal high-velocity channels is developed. The model is designed specifically for simulation of flow in channels having sloping sidewalls in which the depth is an unknown variable in the governing equations and therefore the plan view of the flow domain is not known a priori. Solutions are obtained by time stepping from specified initial conditions using an implicit Petrov-Galerkin moving finite-element representation of the governing equations. The moving finite-element model produces a simultaneous solution for the boundary displacement and flow variables. This implementation provides stable solutions for supercritical flow even at relatively large Courant numbers. The model is tested by comparison of simulation results with laboratory data. These data sets serve as a basis for evaluation of the numerical model and should also prove useful to researchers in testing other numerical flow models applied to supercritical flow in channels having sloping sidewalls.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akanbi, A. A., and Katopodes, N. D.(1988). “Model for flood propagation on initially dry land.”J. Hydr. Engrg., ASCE, 114(7), 689–706.
2.
Baines, M. J. (1994). Moving finite elements. Oxford University Press, New York, N.Y.
3.
Berger, R. C. Jr. (1993). “A finite element scheme for shock capturing.”Tech. Rep. TR-93-12, U.S. Army Engr. Wtrwy. Experiment Station, Vicksburg, Miss.
4.
Berger, R. C., and Stockstill, R. L.(1995). “Finite element model for high-velocity channels.”J. Hydr. Engrg., ASCE, 121(10), 710–716.
5.
Bhallamudi, S. M., and Chaudhry, M. H.(1992). “Computation of flows in open-channel transitions.”J. Hydr. Res., 30(1), 77–93.
6.
Hager, W. H., Schwalt, M., Jimenez, O., and Chaudhry, M. H.(1994). “Supercritical flow near an abrupt wall deflection.”J. Hydr. Res., 32(1), 103–118.
7.
Henderson, F. M. (1966). Open channel flow. Macmillian Publishing Co., New York, N.Y.
8.
Jimenez, O. F., and Chaudhry, M. H.(1988). “Computation of supercritical free-surface flows.”J. Hydr. Engrg., ASCE, 114(4), 377–395.
9.
Katopodes, N. D. (1980). “Finite element model for open channel flow near critical conditions.”Finite Elements in Water Resources; Proc., 3rd Int. Conf. on Finite Elements in Water Resour., S. Y. Wang, C. V. Alonso, C. A. Brebbia, W. G. Gray, and G. F. Pinder, eds., School of Engrg., Univ. of Mississippi, University, Miss., 5.37–5.46.
10.
Katopodes, N. D.(1984). “Two-dimensional surges and shocks in open channels.”J. Hydr. Engrg., ASCE, 110(6), 794–812.
11.
Katopodes, N. D.(1986). “Explicit computation of discontinuous channel flow.”J. Hydr. Engrg., ASCE, 112(6), 456–475.
12.
Lynch, D. R.(1982). “Unified approach to simulation on deforming elements with application to phase change problems.”J. Computational Phys., 47, 387–411.
13.
Lynch, D. R., and Gray, W. G.(1980). “Finite element simulation of flow in deforming regions.”J. Computational Phys., 36, 135–153.
14.
MacKinnon, R. J., and Carey, G. F.(1993). “Moving-grid finite element modeling of thermal ablation and consolidation in porous media.”Int. J. Numer. Methods in Engrg., 36, 717–744.
15.
Miller, K.(1981). “Moving finite elements. II.”SIAM J. Numer. Anal., 18(6), 1033–1057.
16.
Miller, K., and Miller, R. N.(1981). “Moving finite elements. I.”SIAM J. Numer. Anal., 18(6), 1019–1032.
17.
Molls, T., and Chaudhry, M. H.(1995). “Depth-averaged open-channel flow model.”J. Hydr. Engrg., ASCE, 121(6), 453–465.
18.
Ramaswamy, B., and Kawahara, M. (1987). “Arbitrary Lagrangian-Eulerian finite element method for unsteady, convective, incompressible viscous free surface fluid flow.”Finite elements in fluids, Vol. 7, R. H. Gallagher, R. Glowinski, P. M. Gresho, J. T. Oden, and O. C. Zienkiewicz, eds., John Wiley & Sons, Inc., New York, N.Y., 65–87.
19.
Shyy, W., Udaykumar, H. S., Rao, M. W., and Smith, R. W. (1996). Computational fluid dynamics with moving boundaries. Taylor and Francis, Washington, D.C.
20.
Stockstill, R. L. (1995). “A two-dimensional free-surface flow model for trapezoidal high-velocity channels,” PhD thesis, Dept. of Civ. Engrg., Univ. of Washington, Seattle, Wash.
21.
Younus, M., and Chaudhry, M. H.(1994). “A depth-averaged κ-ε turbulence model for the computation of free-surface flow.”J. Hydr. Res., 32(3), 415–444.
22.
Zerroukat, M., and Chatwin, C. R. (1994). Computational moving boundary problems. John Wiley & Sons, Inc., New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Oct 1, 1997
Published in print: Oct 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.