Nonrigid, Nonsubmerged, Vegetative Roughness on Floodplains
Publication: Journal of Hydraulic Engineering
Volume 123, Issue 1
Abstract
Individual pine and cedar tree saplings and branches were used to model the resistance to flow in a water flume for nonsubmerged and nonrigid vegetation to determine the amount that streamlining decreases the drag coefficient and reduces the momentum absorbing area. Currently, vegetation on floodplains is commonly assumed to behave as rigid roughness that can lead to large errors in the relationships between velocity and drag force. This presents a basic fluid mechanics problem. An extreme variation of roughness with depth of flow can result due to a large increase in the momentum absorbing area in nonsubmerged vegetation as depth is increased. This deems all the available roughness equations (which generally are based on relative roughness approach) useless for this application. In this paper a dimensional analysis, supported by experimental results, is developed to obtain a relationship between roughness conditions (i.e., density and flexural rigidity) and flow conditions (i.e., velocity and depth) for floodplains and vegetative zones of natural waterways.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arcement, G. J. Jr., and Schneider, V. R. (1984). “Guide for selecting Manning's roughness coefficients for natural channels and flood plains.”Rep. No. FHWA-TS-84-204, Federal Highway Administration, Washington, D.C.
2.
Arcement, G. J. Jr., and Schneider, V. R. (1989). “Guide for selecting Manning's roughness coefficients for natural channels and flood plains.”Water-Resource Paper 2339, U.S. Geological Survey, Washington, D.C.
3.
Barnes, H. H. Jr. (1967). “Roughness characteristics of natural channels.”Water-Resource Paper 1849, U.S. Geological Survey, Washington, D.C.
4.
Chow, V. T. (1959). Open channel hydraulics. McGraw-Hill, New York, N.Y.
5.
Easi user's guide, PCI-Easi/Pace software, version 5.3. (1994). PCI Inc. (PCI), Richmond Hill, Ontario, Can.
6.
Einstein, H. A., and Banks, R. B.(1950). “Fluid resistance of composite roughness.”Trans., Am. Geophys. Union, 31(4), 603–610.
7.
Fenzl, R. N. (1962). “Hydraulic resistance of broad, shallow, vegetated channels,” PhD thesis, Univ. of California, Berkeley, Calif.
8.
Gerhart, P. M., and Gross, R. J. (1985). Fundamentals of fluid mechanics. Addison Wesley Publishing Co., Don Mills, Ontario.
9.
Handbook of channel design for soil and water conservation. (1954). Publ. SCS-TP-61, Soil Conservation Service, Washington, D.C.
10.
Keulegan, G. H.(1938). “Laws of turbulent flow in open channels.”J. Res., Nat. Bureau of Standards, 21(6), 707–741.
11.
Koloseus, M. J., and Davidian, J. (1966). “Free surface instability correlations.”Laboratory Studies in Open Channel Flows, Water-Supply Paper 1952-C, U.S. Geological Survey, Washington, D.C.
12.
Kouwen, N.(1992). “Modern approach to design of grassed channels.”J. Irrig. and Drainage Engrg., ASCE, 118(5), 733–743.
13.
Kouwen, N., and Unny, T. E.(1973). “Flexible roughness in open channels.”J. Hydr. Div., ASCE, 99(5), 713–728.
14.
McMahon, T. A., and Kronauer, R. E.(1976). “Tree structures: Deducing the principle of mechanical design.”J. Theoretical Biol., 59, 443–466.
15.
McMahon, T. A.(1975). “The mechanical design of trees.”Scientific Am., 233(1), 92–102.
16.
Morris, H. M.(1955). “Flow in rough conduits.”Trans., ASCE, 120, 373–410.
17.
Niklas, K. J., and Moon, F. C.(1988). “Flexural stiffness and modulus of elasticity of flower stalks from Allium sativum as measured by multiple resonance frequency spectra.”Am. J. Botany, 75(10), 1517–1525.
18.
Petryk, S., and Bosmajian, G. III(1975). “Analysis of flow through vegetation.”J. Hydr. Div., ASCE, 101(7), 871–884.
19.
Raupach, M. R., Thom, A. S., and Edwards, I.(1980). “A wind-tunnel study of turbulent flow close to regularly arrayed rough surfaces.”Boundary Layer Meteorology, 18, 373–397.
20.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., McGraw-Hill, New York, N.Y.
21.
Wang, H. C., and Worley, W. J. (1966). “Tables of natural frequency and nodes of transverse vibration of tapered beams.”Nat. Aeronautics and Space Admin. Rep. NASA-CR-443, Univ. of Illinois, Urbana, Ill.
22.
White, F. M. (1986). Fluid Mechanics, 2nd Ed., McGraw-Hill, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jan 1, 1997
Published in print: Jan 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.