Explicit Mathematical Models of Distribution Storage Water Quality
Publication: Journal of Hydraulic Engineering
Volume 121, Issue 10
Abstract
Explicit analytical mathematical models for use in water-quality simulation studies and management of distribution-system storage are developed. The proposed models can be used effectively for investigating the mixing characteristics of tanks and subsequent effects on water quality, and can directly supplement any of the existing distribution-system water-quality simulators. These models are formulated analytically from mass-balance principles, where specific hydrodynamic processes are modeled conceptually. The resulting models are simple to understand and implement and are well suited to the needs of those practicing engineers who wish to write and run their own programs. The performance of the models is illustrated by application to actual tank data taken from a previous paper. Enhancement of distribution-system water-quality management is a principal benefit of the developed models.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Boulos, P. F., and Altman, T. (1993). “Explicit calculation of water quality parameters in pipe distribution systems.”J. Civ. Engrg. Systems, Vol. 10, 187–206.
2.
Boulos, P. F., Altman, T., Bowcock, R. W., and Dhingra, A. K. (1994a). “An explicit algorithm for modeling distribution system water quality with applications.”2nd Int. BHR Conf. on Water Pipeline Systems, BHR, D. S. Miller, ed., Edingburgh, Scotland, 405–423.
3.
Boulos, P. F., Altman, T., Jarrige, P. A., and Collevati, F. (1994b). “An event-driven method for modeling contaminant propagation in water networks.”J. Appl. Mathematical Modelling, Vol. 18, 84–92.
4.
Boulos, P. F., Altman, T., Jarrige, P. A., and Collevati, F.(1994c). “A discrete simulation approach for network water quality models.”J. Water Resour. Plng. and Mgmt., ASCE, 121(1), 49–60.
5.
Boulos, P. F., Altman, T., and Sadhal, K. S. (1992). “Computer modeling of water quality in large multiple source networks.”J. Appl. Mathematical Modelling, Vol. 16, 439–445.
6.
Chun, D. G., and Selznick, H. L. (1985). “Computer modeling of distribution system water quality.”Computer applications in water resources, ASCE, New York, N.Y.
7.
Clark, R. M., Goodrich, J. A., and Wymer, L. J.(1993). “Effect of the distribution system on drinking water quality.”J. AQUA, 42(1), 30–38.
8.
Clark, R. M., Grayman, W. M., Males, R. M., and Coyle, J. M. (1988). “Modeling contaminant propagation in drinking water distribution system.”J. AQUA, Vol. 3, 137–151.
9.
Dankwerts, P.(1953). “Continuous flow systems: distribution of residence times.”Chemical Engrg. Sci., 2(1), 1–13.
10.
Fowler, A. G., and Jones, P. (1991). “Simulation of water quality in water distribution systems.”Proc., AWWARF/EPA Conf. on Water Qualtiy Modeling in Distribution Systems, EPA, Cincinnati, Ohio.
11.
Grayman, W. M., and Clark, R. M. (1991). “Water quality modeling in distribution systems.”Symp. on Dynamics of Water Quality in Distribution Systems, AWWA Annu. Conf., AWWA, Philadelphia, Pa.
12.
Grayman, W. M., and Clark, R. M.(1993). “Using computer models to determine the effects of storage on water quality.”J. Am Water Works Assoc., 85(7), 67–77.
13.
Grayman, W. M., Clark, R. M., and Males, R. M.(1988). “Modeling distribution system water quality: dynamic approach.”J. Water Resour. Plng. and Mgmt., ASCE, 114(3), 295–312.
14.
Kennedy, M. S., Moegling, S., Sarikelle, S., and Suravallop, K.(1993). “Assessing the effects of storage design on water quality.”J. Am. Water Works Assoc., 85(7), 78–88.
15.
Levenspeil, O. (1972). Chemical reaction engineering, 2nd Ed., John Wiley & Sons, Inc., New York, N.Y.
16.
Liou, C. P., and Kroon, J. R. (1987). “Modeling the propagation of waterborne substances in distribution networks.”J. Am. Water Works Assoc., Vol. 79, 54–58.
17.
Males, R. M., Clark, R. M., Wehrman, P. J., and Gates, W. E.(1985). “Algorithm for mixing problems in water systems.”J. Hydr. Engrg., ASCE, 111(2), 206–219.
18.
Nauman, E. B., and Buffham, B. A. (1983). Mixing in continuous flow systems, John Wiley & Sons, Inc., New York, N.Y.
19.
Rossman, L. A., Boulos, P. F., and Altman, T.(1993). “Discrete volume element method for network water quality models.”J. Water Resour. Plng. and Mgmt., ASCE, 119(5), 505–517.
20.
Shah, M., and Sinai, G.(1988). “Steady state model for dilution in water networks.”J. Hydr. Engrg., ASCE, 114(2), 192–206.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 121 • Issue 10 • October 1995
Pages: 699 - 709
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Oct 1, 1995
Published in print: Oct 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.