Migration of Backward‐Facing Step
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 120, Issue 6
Abstract
A backward‐facing step sometimes forms in an alluvial river. The step deforms and migrates when the inflow sediment and flow conditions change. A series of experiments were conducted to investigate the migration behavior of a backward‐facing step composed of uniform sediment. According to the experimental observations, the phenomena observed were that the bed material picked up from the upstream reach was deposited in the separation zone at the step and caused the step to migrate downstream. Due to contraction of the flow cross section in the vicinity of the knickpoint, the bed‐shear stress increased locally, which caused scouring. The scouring propagated either upstream or downstream depending on step height, flow conditions, and sediment characteristics. A linear‐wave model was proposed to simulate the process. The model was calibrated and verified with experimental data. Due to the nonuniformity of the flow conditions in the vicinity of the step, the model can only provide qualitative information in this region. Fortunately, the nonuniform‐flow conditions last at most 60 s, and hence the overall simulation results are quite satisfactory.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Begin, Z. B., Meyer, D. F., and Schumm, S. A. (1980). “Knickpoint migration in alluvial channels in response to base level lowering.” J. Wtrwy., Port, Coast., and Oc. Div., ASCE, 106(3), 369–387.
2.
Bhallamudi, S. M., and Chaudhry, M. H. (1991). “Numerical modeling of aggradation and degradation in alluvial channels.” J. Hydr. Engrg., ASCE, 117(9), 1,145–1,164.
3.
Gill, M. A. (1983). “Diffusion model for degrading channels.” J. Hydr. Res., 21(5), 369–378.
4.
Gill, M. A. (1987). “Nonlinear solution of aggradation and degradation in channels.” J. Hydr. Res., 25(5), 537–547.
5.
Gill, M. A. (1988). “Hyperbolic model for aggrading channels.” J. Engrg. Mech., ASCE, 114(1), 1245–1255.
6.
Jaramillo, W. F. (1983). “Aggradation and degradation of alluvial‐channel beds,” PhD thesis, University of Iowa, Iowa City, Iowa.
7.
Nakagawa, H., and Nezu, I. (1987). “Experimental investigation on turbulent structure of backward‐facing step flow in an open channel.” J. Hydr. Res., 25(1), 67–88.
8.
Phillips, B. C., and Sutherland, A. J. (1986). “Diffusion models applied to channel degradation.” J. Hydr. Res., 25(3), 179–191.
9.
Ribberink, J. S., and Van Der Sande, J. T. M. (1985). “Aggradation in rivers due to overloading‐analytical approaches.” J. Hydr. Res., 23(3), 273–283.
10.
Shumm, S. A., Mosley, M. P., and Weaver, W. E. (1987). Experimental fluvial geomorphology. John Wiley & Sons, Inc., New York, N.Y.
11.
Soni, J. P., Garde, R. J., and Ranga Raju, K. G. (1980). “Aggradation in stream due to overloading.” J. Hydr. Engrg., ASCE, 106(1), 117–132.
12.
Vries, M. de. (1973). “River‐bed variation‐aggradation and degradation.” Publ. No. 107, Delft Hydraulics Laboratory, Delft, The Netherlands.
13.
Zhang, H., and Kahawita, R. (1987). “Nonlinear model for aggradation in alluvial channels.” J. Hydr. Engrg., ASCE, 113(3), 353–369.
14.
Zhang, H., and Kahawita, R. (1990). “Linear hyperbolic model for alluvial channels.” J. Hydr. Engrg., ASCE, 116(4), 478–493.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Dec 7, 1992
Published online: Jun 1, 1994
Published in print: Jun 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.