Hydraulic Model Study for Boston Outfall. II: Environmental Performance
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Hydraulic Engineering
Volume 119, Issue 9
Abstract
Hydraulic model tests were done on the Boston Harbor outfall diffuser with the number of risers and their spacing maintained constant at their final design values. It was found that eight ports per riser resulted in higher dilutions than 12, because with 12 ports the plumes merged and collapsed to a single rising column. Extended duration tests showed that the waste field was stable, that its thickness increased very slowly with time, and that dilution decreased very slowly with time. The flux‐average dilution was estimated from the movement of dye streaks to be only 1.1–1.2 times higher than the minimum dilution, a much smaller ratio than usually assumed. The mathematical model ULINE was found to be generally conservative in predicting dilution. Better predictions were obtained with a new mathematical model RSB, which well simulated the observed waste‐field characteristics for the final design. The effect of varying the number of risers was not so well predicted by RSB, however, due to the very large effective port spacing for this diffuser. Thus, hydraulic model tests are still needed for atypical diffuser designs, such as encountered here.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baumgartner, D. J., Frick, W. E., Roberts, P. J. W., and Bodeen, C. A. (1992). Dilution models for effluent discharges. U.S. Envir. Protection Agency, Pacific Ecosystems Branch, Office of Science and Technology, Newport, Ore.
2.
Isaacson, M. S., Koh, R. C. Y., and Brooks, N. H. (1978). “Sectional hydraulic modeling study of plume behavior: San Francisco southwest ocean outfall project.” Tech. Memo. 78‐2, W. M. Keck Lab. of Hydr. and Water Resour., California Inst. of Technol., Berkeley, Calif.
3.
Isaacson, M. S., Koh, R. C. Y., and Brooks, N. H. (1983). “Plume dilution for diffusers with multiport risers.” J. Hydr. Engrg., ASCE, 109(2), 199–220.
4.
Jirka, G. H., and Harleman, D. R. F. (1979). “Stability and mixing of a vertical plane buoyant jet in confined depth.” J. Fluid Mech., 94(2), 275–304.
5.
Muellenhoff, W. P., Soldate, A. M., Baumgartner, D. J., Schuldt, M. D., Davis, L. R., and Frick, W. E. (1985). “Initial mixing characteristics of municipal ocean discharges.” U.S. Envir. Protection Agency, Corvallis, Ore., Rep. No. EPA‐600/3‐85‐073a.
6.
Roberts, P. J. W. (1979). “Line plume and ocean outfall dispersion.” J. Hydraulics Div., ASCE, 105(4), 313–330.
7.
Roberts, P. J. W. (1989). “Dilution hydraulic model study of the Boston wastewater outfall.” Rep. number SCEGIT 89‐101, School of Civ. Engrg., Georgia Inst. of Technol., Atlanta, Ga.
8.
Roberts, P. J. W., Snyder, W. H., and Baumgartner, D. J. (1989a). “Ocean outfalls. I: Submerged wastefield formation.” J. Hydr. Engrg., ASCE, 115(1), 1–25.
9.
Roberts, P. J. W., Snyder, W. H., and Baumgartner, D. J. (1989b). “Ocean outfalls. II: Spatial evolution of submerged wastefield.” J. Hydr. Engrg., ASCE, 115(1), 26–48.
10.
Roberts, P. J. W., Snyder, W. H., and Baumgartner, D. J. (1989c). “Ocean outfalls. III: Effect of diffuser design on submerged wastefield.” J. Hydr. Engrg., ASCE, 115(1), 49–70.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Jul 8, 1992
Published online: Sep 1, 1993
Published in print: Sep 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.