Two‐Dimensional Water Flood and Mudflow Simulation
Publication: Journal of Hydraulic Engineering
Volume 119, Issue 2
Abstract
FLO‐2D is a two‐dimensional finite difference model that simulates clear‐water flood hazards, mudflows, and debris flows on alluvial fans and urban floodplains. Interactive flood or mudflow routing between channel, street, and floodplain flow is performed using a uniform grid system to describe complex floodplain topography. A quadratic rheological model, developed from field and laboratory mudflow data, enables appropriate simulations of flooding conditions ranging from clear water to hyperconcentrated sediment flows. Computer‐aided design (CAD) graphics of predicted time‐sequenced flood depths automates the delineation of flood hazards. Replication of the 1983 Rudd Creek mudflow in Utah demonstrates the capability of the model.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akan, A. O., and Yen, B. C. (1981). “Diffusion‐wave routing in Channel Networks.” J. Hydr. Div., ASCE, 107(6), 719–732.
2.
Bagnold, R. A. (1954). “Experiments on a gravity‐free dispersion of large solid spheres in a Newtonian fluid under shear.” Proc., Royal Society of London, series A, 225, 49–63.
3.
DeLeon, A. A., and Jeppson, R. W. (1982). “Hydraulic and numerical solutions of steady‐state but spatially varied debris flow.” Hydraulics and hydrology series, UWRL/H‐82/03, Utah State Univ., Logan, Utah.
4.
Egashira, S., Ashida, K., Yajima, H., and Takahama, J. (1989). “Constitutive equations of debris flow.” Ann., disaster prevention res. inst., No. 32B‐2, Kyoto Univ., Kyoto, Japan, 487–501.
5.
Einstein, H. A. (1950). “The bed‐load function for sediment transportation in open channel flows.” USDA tech. bull. no. 1026, U.S. Department of Agriculture, Washington, D.C.
6.
FAN, an alluvial fan flooding computer program, user's manual. (1990). Federal Emergency Management Agency, Office of Risk Assessment, Washington, D.C.
7.
Hromadka, T. V. II, and Yen, C. C. (1987). “Diffusive hydrodynamic model.” Water Resources Investigations Report 87‐4137, USGS, Denver Federal Center, Denver, Colo.
8.
Incorporating the effects of mudflows into flood studies on alluvial fans. (1986). U.S. Army Corps of Engineers, Omaha District, Omaha, Ne.
9.
Julien, P. Y., and Lan, Y. Q. (1991). “On the rheology of hyperconcentration.” J. Hydr. Engr., ASCE, 117(3), 346–353.
10.
Julien, P. Y., and O'Brien, J. S. (1987). “Discussion of “Mountain torrent erosion.” Sediment transport in gravel‐bed rivers. John Wiley & Sons, New York, N.Y., 537–539.
11.
Liggett, J. A., and Cunge, J. A. (1975). “Numerical methods of solution of the unsteady flow equations.” Unsteady Flow in Open Channels, K. Mahmood and V. Yevjevich, eds., Water Resources Publications, Fort Collins, Colo.
12.
MacArthur, R. C., and Schamber, D. R. (1986). “Numerical methods for simulating mudflows.” Proc., 3rd Int. Symp. on River Sedimentation, Univ. of Mississippi, Oxford, Miss., 1615–1623.
13.
Major, J. J., and Pierson, T. C. (1990). “Rheological analysis of fine‐grained natural debris‐flow material.” Proc., Int. Symp. on Hydr./Hydro. of Arid Lands, ASCE, New York, N.Y., 225–231.
14.
Meyer‐Peter, E., and Müller, R. (1948). “Formulas for bedload transport.” Proc., IAHRM 2nd Congr., Int. Assoc. for Hydr. Res., Stockholm, 39–64.
15.
O'Brien, J. S. (1986). “Physical processes, rheology and modeling of mudflows,” PhD thesis, Colorado State University, Fort Collins, Colo.
16.
O'Brien, J. S., and Fullerton, W. T. (1990). “Urban floodplain and alluvial fan stormwater modeling.” Urban Hydro., Proc., 26th Annual AWRA Conf., Denver, Colo.
17.
O'Brien, J. S., and Julien, P. Y. (1985). “Physical properties and mechanics of hyperconcentrated sediment flows.” Proc., ASCE Specialty Conf. on the Delineation of Landslides, Flash Floods and Debris Flow Hazards in Utah, Utah Water Research Lab., Univ. of Utah at Logan, Utah, 260–279.
18.
O'Brien, J. S., and Julien, P. Y. (1988). “Laboratory analysis of mudflow properties.” J. Hydr. Engrg., ASCE, 114(8), 877–887.
19.
Ponce, V. M., Li, R. M., and Simons, D. B. (1978). “Applicability of kinematic and diffusion models.” J. of Hydr. Div., ASCE, 104(3), 353–360.
20.
Schamber, D. R., and MacArthur, R. C. (1985). “One‐dimensional model for mud‐flows.” Proc., ASCE specialty conference on hydr. and hydro. in the small comp. age. Vol. 2, ASCE, New York, N.Y., 1334–1339.
21.
Takahashi, T., and Tsujimoto, H. (1985). “Delineation of the debris flow hazardous zone by a numerical simulation method.” Proc., Int. Symp. on Erosion, Debris Flow and Disaster Prevention, Tsukuba, Japan, 457–462.
22.
Takahashi, T., and Nakagawa, H. (1989). “Debris flow hazard zone mapping.” Proc., Japan‐China (Taipei) Joint Seminar on Natural Hazard Mitigation, Kyoto, Japan, 363–372.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Aug 27, 1992
Published online: Feb 1, 1993
Published in print: Feb 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.