Acoustic Measurement of River Discharge
Publication: Journal of Hydraulic Engineering
Volume 115, Issue 7
Abstract
This paper presents a new moving‐boat method for rapidly measuring river discharge using an acoustic Doppler current profiler (ADCP). The method uses an ADCP to measure current profiles and boat velocity along transects across a river. Measurements from the River Elbe, near Hamburg, Germany, are presented to illustrate the method and its associated uncertainties. An ADCP measures profiles of current velocity relative to the boat and the velocity of the boat relative to the bottom; the discharge calculation depends only on these data, and it is not necessary to know either compass heading or the actual location of the boat. Furthermore, the transect can be an arbitrary curve as long as it starts near one side of the river and ends near the other. Uncertainty in discharge from random errors, biases, and missed data near the surface, bottom, and sides of the river is investigated. Missed data near the surface and bottom are the largest source of error unless the data are corrected by assuming model profiles. With correction, the error in estimation of total discharge is dominated by flow in the shallow water at the sides of the river; for the River Elbe, the total error appears to be about 5%.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Derecki, J., and Quinn, F. (1987). “Use of current meters for continuous measurement of flows in large rivers.” Water Resour. Res., 23, 1751–1756.
2.
Chen, C.‐L. (1988). “Power formula for open‐channel flow resistance.” Proc., ASCE Hydr. Div. Nat. Conf. on Hydr. Engrg.
3.
Frey, H. R. (1988). “Innovations in physical oceanography: Circulation atlases and real‐time current and water level measurements.” Proc. U.S. Hydrographic Conf., Baltimore, Md.
4.
Johannessen, J. A., et al. (1989). “Three dimensional oceanic and current structure of mesoscale eddies in the Norwegian coastal current.” J. Phys. Oceanography (in press).
5.
Johns, W. E. (1988). “Near‐surface current measurements in the Gulf Stream using an upward‐looking acoustic Doppler current profiler.” J. Atmospheric Oceanographic Tech.
6.
Kosro, P. M. (1985). “Shipboard acoustic current profiling during the coastal ocean dynamics experiment,” thesis presented to Scripps Institute of Oceanography, at university of California, San Diego, Calif., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
7.
Leopold, L. (1962). “Rivers.” Am. Scientist, 50, 511–537.
8.
Lindstrom, E., et al. (1987). “The Western Equatorial Pacific Ocean Circulation Study.” Nature, 330, 533–537.
9.
Pinkel, R. (1980). “Acoustic Doppler techniques.” Air‐sea interaction, F. Dobson, L. Hasse, and R. Davis, eds., Plenum, New York, N.Y., 171–199.
10.
Schott, F., and Johns, W. (1987). “Half‐year long measurement with a buoy‐mounted acoustic Doppler current profiler in the Somali Current.” J. Geographic Res., 92, 5169–5176.
11.
Simpson, M. R. (1986). “Evaluation of a vessel‐mounted acoustic Doppler current profiler for use in rivers and estuaries.” Proc. IEEE Third Working Conf. on Current Measurement, Airlie, Va., 106–121.
12.
Theriault, K. B. (1986). “Incoherent multibeam Doppler current profiler performance: Part I—Estimate variance.” IEEE J. Oceanic Engrg., 11, 7–15.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 115 • Issue 7 • July 1989
Pages: 925 - 936
Copyright
Copyright © 1989 ASCE.
History
Published online: Jul 1, 1989
Published in print: Jul 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.