Division of Flow in Short Open Channel Branches
Publication: Journal of Hydraulic Engineering
Volume 114, Issue 4
Abstract
A theoretical model for division of flow in a short branch channel set at right angles to a main channel is presented for various width ratios of the branch channel to the main channel. The model is developed using the principles of momentum, energy, and continuity and is based on the existence of free flow conditions in the branch channel. The analysis makes use of the similarity of flow configuration between the division of flow in a branch channel and in a twodimensional lateral conduit outlet fitted with a barrier. This similarity of flow is used to estimate the contraction coefficient of the converging jet entering the branch channel. The ratio of the branch channel flow to the main channel flow is related to the Froude number in the main channel section downstream of the junction. Data from present experimental studies and those from earlier investigations are presented to validate the theoretical model.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Grace, J. L., and Priest, M. S. (1958). “Division of flow in open channel junctions.” Bulletin No. 31, Engineering Experiment Station, Alabama Polytechnic Institute.
2.
Hager, W. H. (1983). “Approximate treatment of flow in branches and bends.” Proc. Instn. Mech. Engrs., Part C, 198(4), 63–69.
3.
Krishnappa, G., and Seetharamiah, L. (1963). “A new method of predicting the flow in a 90 branch channel.” La Houille Blanche, Assn. pour la Diffusion de la Documentation Hydraulique, Grenoble, France, No. 7, Nov., 775–778.
4.
LakshmanaRao, N. S., and Sridharan, L., (1966). Discussion of “Dividing flow in an open channel,” by S. W. Law and A. J. Reynolds, J. Hydr. Div., ASCE, 94(HY6), 237–39.
5.
Lakshmana Rao, N. S., Sridharan, L., and Baig, M. Y. A. (1968). “Experimental study of the division of flow in an open channel.” Proc., Third Australasian Conference on Hydraulics and Fluid Mechanics, Sydney, Australia, Nov., 139–142.
6.
Law, S. W. (1965). “Dividing flow in an open channel,” thesis presented to McGill University at Montreal, Canada, in partial fulfillment of the requirements for the degree of Master of Engineering.
7.
Law, S. W., and Reynolds, A. J., (1966). “Dividing flow in an open channel.” J. Hydr. Div., ASCE, 92(HY2), 207–231.
8.
McNown, S. J., and Hsu, E. Y. (1950). “Application of conformal mapping in divided flow.” Proceedings of the Midwestern Conference on Fluid Dynamics, First Conference, State University of Iowa, Ames, Iowa, 143–155.
9.
Milne‐Thomson, M. (1949). Theoretical hydrodynamics. MacMillan and Co. Ltd., London, U.K.
10.
Murota, A. (1958). “On the flow characteristics of a channel with a distributory.” Technology Reports of the Osaka University, Osaka, Japan, 6(198).
11.
Pattabhiramiah, K. R. (1960). “Some characteristics of branch channel flow,” thesis presented to the Indian Institute of Science, Bangalore, India, in partial fulfillment of the requirements for the degree of Master of Science.
12.
Pattabhiramiah, K. R., and Rajaratnam, N. (1960). “A new method of predicting flow in a branch channel.” J. Central Board Irrig. Power, 17(1), 48–51.
13.
Rajaratnam, N. (1967). “Constant velocity concept for supercritical branch channel flow.” J. Board Irrig. Power, 19(1), 17–21.
14.
Sridharan, L., and Lakshmana Rao, N. S., (1966). “Division and combination of flow in open channels.” J. Inst. Engrg., Civ. Engrg. Div., India, 46(7), 337–356.
15.
Sridharan, L. (1966). “Division of flow in open channels,” thesis presented to the Indian Institute of Science, Bangalore, India, in partial fulfillment of the requirements for the degree of Master of Science.
16.
Tanaka, K. (1957). “The improvement of the inlet of the power canal.” Trans. Seventh General Meeting of I.A.H.R., Lisbon, Portugal, Vol. 1, C:20.1–20.16.
17.
Taylor, E. (1944). “Flow characteristics at rectangular open channel junctions.” Trans., ASCE, 109, 893–902.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Apr 1, 1988
Published in print: Apr 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.