Velocity and Sediment‐Concentration Profiles in River Flows
Publication: Journal of Hydraulic Engineering
Volume 113, Issue 2
Abstract
An equation for the exponent in the power‐law velocity distribution is formulated by relating the rate of energy dissipation due to turbulent shear of the sediment bed‐layer to the increased rate of fluid‐shear energy dissipation produced by the moving sediment. The suspended‐sediment concentration distribution corresponding to the power‐law velocity profile is calculated and simplified. The relation derived for the power‐law exponent is found to be in good agreement with data from a large group of flume and river flows. The powerlaw velocity profile and the corresponding concentration distribution are shown to be in excellent conformity with the distributions measured by Vanoni and Brooks.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barton, J. R., and Lin, P.‐N. (1955). “A study of the sediment transport in alluvial channels.” Report No. 55JR82. Colorado A&M Coll., Civ. Engrg. Dept., Fort Collins, Colo.
2.
Chen, Y. (1984). “Vertical distribution of suspended sediment in open channel.” J. of Sediment Res., Beijing, China, 1, 31–40.
3.
Chien, N. (1956). “The present status of research on sediment transport,” Trans. ASCE, 121, 2824, 833–868.
4.
Coleman, N. L. (1981). “Velocity profiles with suspended sediment.” J. of Hydr. Res., 19(3), 211–229.
5.
Coles, D. (1956). “The law of the wake in the turbulent boundary layer.” J. of Fluid Mech., 1, 191–226.
6.
Einstein, H. A., and Chien, N. (1955). “Effects of heavy sediment concentration near the bed on velocity and sediment distribution.” MRD Series No. 8, U.S. Army Corps of Engrs., Missouri River Div., Omaha, Nebr.
7.
Falcon, M., and Kennedy, J. F. (1983). “Flow in alluvial‐river curves.” J. of Fluid Mech., 133, Aug., 1–16.
8.
Fukuoka, S. (1971). “Characteristics of open‐channel flow with sediment.” Thesis presented to Tokyo Institute of Technology, Tokyo, Japan, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
9.
Hinze, J. O. (1975). Turbulence, 2nd ed., McGraw‐Hill Book Co., New York, N.Y.
10.
Hsia, C. H. (1943). “A study of transportation of fine sediments by flowing water.” Thesis presented to the University of Iowa, Iowa City, Iowa, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
11.
Hsu, S.‐T., and Kennedy, J. F. (1971). “Turbulent flow in wavy pipes,” J. of Fluid Mech., 47(3), 481–502.
12.
Ippen, A. T. (1971). “A new look at sedimentation in turbulent streams,” J. of the Boston Soc. of Civ. Engrs., 58(3), 131–163.
13.
Itakura, T., and Kishi, T. (1980). “Open channel flow with suspended sediments,” J. of the Hydr. Div., ASCE, 106(8), 1325–1343.
14.
Karim, M. F., and Kennedy, J. F. (1981). “Computer‐based predictors for sediment discharge and friction factors of alluvial streams.” Report No. 242, Iowa Inst. of Hydr. Res., The Univ. of Iowa, Iowa City, Iowa.
15.
Knapp, R. T. (1938). “Energy‐balance in stream‐flows carrying suspended load,” Trans. Amer. Geophys. Union, 9th Ann. Mtg., Natl. Res. Council, Washington, D.C.
16.
Landweber, L. (1953). “The frictional resistance of flat plates in zero pressure gradient,” Trans. SNAME, 61.
17.
Landweber, L. (1957). “Generalization of the logarithmic law of the boundary layer on a flat plate,” Sonderdruck aus der Fachzeitschrift Schiffstechnik, 21.
18.
Nunner, W. (1956). “Warmeuebergang and Druckabfall in Rauhen Rohren,” VDI, Forschungsheft 455, Series B, Band 2.
19.
Parker, G., and Coleman, N. L. (1986). “Simple model of sediment‐laden flows,” J. of Hydr. Engrg. , ASCE, 112(5), May, 356–375.
20.
Reynolds, A. J. (1974). Turbulent flows in engineering, John Wiley & Sons, London, U.K.
21.
Rouse, H. (Ed.) (1959). Advanced mechanics of fluids, John Wiley & Sons, New York, N.Y.
22.
Schlichting, H. (1979). Boundary‐layer theory, 7th ed., McGraw‐Hill Book Co., New York, N.Y.
23.
Townsend, A. A. (1954). “Turbulent friction on a flat plate.” Skipsmodelltankens meddelelse, 32, 1–16.
24.
United States Army Corps of Engineers, 1952 and 1953, “Sediment transport characteristics study, tabulation of basic data from S.T.C. Study Reach, Missouri River.” Corps of Engrs., Omaha District, Omaha, Nebr.
25.
Vanoni, V. A. (1946). “Transportation of suspended sediment by water.” Trans. ASCE, 111, 67–133.
26.
Vanoni, V. A. (1975). Sedimentation engineering. ASCE Manuals and Reports on Engrg. Practice No. 54, ASCE, New York, N.Y.
27.
Vanoni, V. A., and Brooks, N. H. (1957). “Laboratory studies of the roughness and suspended load of alluvial streams,” Report No. E‐68, California Inst. of Tech., Pasadena, Calif.
28.
Vanoni, V. A., and Nomicos, G. N. (1960). “Resistance properties of sedimentladen streams.” Trans. ASCE, 125, 1140–1175.
29.
Van Rijn, L. C. (1983). “Sediment transportation in heavy sediment‐laden flows.” Proc. of the 2nd Internatl. Symp. on River Sedimentation, Nanjing, China, 482–491.
30.
Wang, S.‐Y. (1981). “Variation of von Karman constant in sedimant‐laden flow,” J. of the Hydr. Div. , ASCE, 107(4), Apr., 407–417.
31.
Yalin, M. S., and Finlayson, G. D. (1972). “On the velocity distribution of the flow carrying sediment in suspension.” Proc. of Symp. to Honor Prof. H. A. Einstein, H. W. Shen, Ed., Colorado State Univ., Fort Collins, Colo., 8.1–8.18.
32.
Zimmermann, C., and Kennedy, J. F. (1978). “Transverse bed slopes in curved alluvial streams,” J. of the Hydr. Div. , ASCE, 104(1), Jan., 33–48.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Feb 1, 1987
Published in print: Feb 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.