Reliability‐Based Optimization Model for Water Distribution Systems
Publication: Journal of Hydraulic Engineering
Volume 113, Issue 12
Abstract
This paper presents the basic framework for a model that can be used to determine the optimal (least‐cost) design of a water distribution system subject to continuity, conservation of energy, nodal head bounds, and reliability constraints. Reliability is defined as the probability of satisfying nodal demands and pressure heads for various possible pipe failures (breaks) in the water distribution system. The overall model includes three that are linked: a steady‐state simulation model, a reliability model, and an optimization model. The simulation model is used to implicitly solve the continuity and energy constraints and is used in the reliability model to define minimum cut sets. The reliability model, which is based on a minimum cut‐set method, determines the values of system and nodal reliability. The optimization model is based on a generalized reduced‐gradient method. Examples are used to illustrate the model.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Billinton, R., and Allan, R. N. (1983). Reliability evaluation of engineering systems: concepts and techniques. Pitman Books Limited, London, England.
2.
Damelin, E., Shamir, U., and Arad, N. (1972). “Engineering & economic evaluation of the reliability of water supply.” Water Resour. Res., American Geophysical Union, 8(4), 861–877.
3.
Goulter, I. D., and Coals, A. V. (1985). “Approaches to the consideration of reliability in water distribution networks.” Proc., 12th Int. Symp. Urban Hydr. Hydraul. Infrastruct. Water Quality Control, Lexington, Ky., 287–295.
4.
Goulter, I. D., and Coals, A. V. (1986). “Quantitative approaches to reliability assessment in pipe networks.” J. Transp. Engrg., ASCE, 112(3), 287–301.
5.
Goulter, I. D., and Morgan, D. R. (1985). “An integrated approach to the layout and design of water distribution systems.” Civil Engrg. Systems, 2(2), 104–113.
6.
Kettler, A. J., and Goulter, I. D. (1983). “Reliability consideration in the least‐cost design of looped water distribution networks.” Proc., 10th Int. Symp. Urban Hydr., Hydraul., Sediment Control, Lexington, Ky., 305–312.
7.
Lansey, K., and Mays, L. (1985). “A methodology for optimal network design.” Computer applications in water resources, H. C. Torno, ed., ASCE, New York, N.Y., 732–738.
8.
Lasdon, L. S., and Waren, A. D. (1979). “Generalized reduced software for linearly and nonlinearly constrained problems.” Design and implementation of optimization software, H. Greenberg, ed., Sigthoff and Noordoff, Netherlands.
9.
Lasdon, L. S., Waren, A. D., and Ratner, M. S. (1984). “GRG2 user's guide.” University of Texas at Austin, Tex.
10.
Mays, L. W., and Cullinane, M. J. (1986). “A review and evaluation of reliability concepts for design of water distribution systems.” Misc. Paper EL‐86‐1, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
11.
Mays, L. W., Duan, N., and Su, Y. C. (1986). “Modeling reliability in water distribution network design.” Water forum 1986: World water issues in evolution, M. Karamouz, et al., eds., ASCE, 1272–1279.
12.
Morgan, D. R., and Goulter, I. D. (1985). “Optimal urban water distribution design.” Water Resour. Res., 21(5), 642–652.
13.
“1985 main break report.” (1986). Water Division, City of St. Louis, Mo.
14.
O'Day, D. K. (1982). “Organizing and analyzing break data for making water main replacement decisions.” J. Amer. Water Works Assoc., 74(11), 589–596.
15.
Quindry, G., Brill, E. D., and Liebman, J. (1981). “Optimization of looped water distribution systems.” J. Envir. Engrg. Div., ASCE, 107(4), 665–679.
16.
Ross, S. M. (1985). Introduction to probability models. Academic Press Inc., Orlando, Fl.
17.
Shamir, U., and Howard, C. D. D. (1979). “An analytic approach to scheduling pipe replacement.” J. Amer. Water Works Assoc., 248–258.
18.
Su, Y. C. (1986). “Reliability‐based optimization model of water distribution systems.” Thesis presented to the University of Texas at Austin, Tex., in partial fulfillment of the requirements for the degree of Master of Science.
19.
Sullivan, J. P., Jr. (1982). “Maintaining aging systems—Boston's approach.” J. Amer. Water Works Assoc., 555–559.
20.
Tung, Y. K. (1985). “Evaluation of water distribution network reliability.” Proc., ASCE Hydraul. Div. Spec. Conf., Orlando, Fl.
21.
Wagner, J. M., Shamir, U., and Marks, D. H. (1986). “Reliability of water distribution systems.” Report 312, Ralph M. Parsons Lab., Massachusetts Institute of Technology, Cambridge, Mass.
22.
Wood, D. J. (1980). “Computer analysis of flow in pipe networks including extended period simulations.” Reference material for three‐day short course and correspondence course, Office of Continuing Education and Extension of the College of Engineering, University of Kentucky, Lexington, Ky.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Dec 1, 1987
Published in print: Dec 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.