Measures of Flow Intensity as Predictors of Bed Load
Publication: Journal of Hydraulic Engineering
Volume 113, Issue 11
Abstract
The relative merits of different measures of flow intensity as predictors of bed‐load transport rates are assessed. Tractive stress, when based on depth and slope, is a poor predictor, especially in narrow channels. Correct application requires elimination of wall and bedform roughness, leaving only that stress acting on the bed grains. When this is done, excellent correspondence with bed‐load rates is found in the experiments of Gilbert, Meyer‐Peter, and G. P. Williams, analyzed here. Vertically averaged velocity requires a correction for depth and particle size; then, it is directly comparable with grain tractive stress. Stream power has limitations as a predictor because it is the product of vertically averaged velocity and bed tractive stress, and hence subject to the problems that those variables individually experience. Unit stream power is a good predictor of concentration in some circumstances. It performs poorly, however, in the data set of Williams, and reasons for this are given.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bagnold, R. A. (1977). “Bed load transport by natural rivers.” Water Resour. Res., 13, 303–312.
2.
Bagnold, R. A. (1980). “An empirical correlation of bedload transport rates in flumes and natural rivers.” Royal Soc. London, Proc., Series A, 372, 453–473.
3.
Colby, B. R. (1964). “Discharge of sands and mean velocity relationships in sand‐bed streams.” United States Geological Survey Professional Paper 462‐A, Washington, D.C.
4.
Einstein, H. A. (1942). “Formulas for the transportation of bed load.” Trans., ASCE, 107, 561–577.
5.
Gilbert, G. K. (1914). “The transportation of debris by running water.” United States Geological Survey Professional Paper 86, Washington, D.C.
6.
Griffiths, G. A. (1986). Discussion of “Transport of gravel by flows up to Ohau River, Otago, New Zealand,” by S. M. Thompson. J. Hydr. Res., 24, 228–231.
7.
Lane, E. W. (1955). “Design of stable channels.” Trans., ASCE, 120, 1234–1279.
8.
Meyer‐Peter, E., and Muller, R. (1948). “Formulae for bedload transport.” Proc. Int. Assoc. Hydr. Res., Stockholm, Sweden, 39–64.
9.
Peterson, A. W., and Howells, R. F. (1973). “A compendium of solids transport data for mobile boundary channels.” Rept. HY 1973‐ST3, Department of Civil Engineering, University of Alberta, Edmonton, Canada.
10.
Shen, H. W. (1971). “Wash load and bed load.” River mechanics, H. W. Shen, ed., Fort Collins, Colo.
11.
Strickler, A. (1923). “Beitrage zur Frage der Geschwindig‐Heitsformel und der Rauhigkeitszahlen für Strome, Kanale und gescholssene Leitungen.” Mitteilungen des Eidgenossicher Amtes für Wasser Wirtschaft, Berne, Switzerland.
12.
Thompson, S. M. (1985). “Transport of gravel by flows up to Ohau River, Otago, New Zealand,” J. Hydr. Res., 23, 285–303.
13.
Vanoni, V. A., and Brooks, N. H. (1957). “Laboratory studies of the roughness and suspended load of alluvial streams.” Report E. 68, California Institute of Technology, Sedimentation Laboratory, Pasadena, Calif.
14.
Williams, G. P. (1967). “Flume experiments on the transport of a coarse sand.” United States Geological Survey Professional Paper 562‐B, Washington, D.C.
15.
Williams, G. P. (1970). “Flume width and water depth effects in sedimenttransport experiments.” United States Geological Survey Professional Paper 562‐H, Washington, D.C.
16.
Williams, G. P. (1983). “Improper use of regression equations in earth sciences.” Geology, 11, 195–197.
17.
Yalin, M. S. (1972). Mechanics of sediment transport. Pergamon Press, New York, N.Y.
18.
Yang, C. T. (1984). “Unit stream power equation for gravel.” J. of Hydr. Engrg., ASCE, 110(12), 1783–1797.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 113 • Issue 11 • November 1987
Pages: 1402 - 1420
Copyright
Copyright © 1987 ASCE.
History
Published online: Nov 1, 1987
Published in print: Nov 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.