Variation of Fabric Anisotropy of Kaolinite in Triaxial Loading
Publication: Journal of Geotechnical Engineering
Volume 122, Issue 8
Abstract
By measuring electrical conductivity in two perpendicular directions, the variation of fabric anisotropy of kaolinite is determined during one-dimensional ( K0 ), anisotropic (σ1/σ3= constant), and isotropic (σ1/σ3= 1) consolidation tests. To verify the validity of test results, the fabric anisotropy is determined at selected stages of loading by analyzing electron micrograph images of vertical and horizontal sections of parent specimens. The results from the two independent techniques are in agreement with each other. The results reveal aspects that can aid in the process of constitutive modeling of clays. In general, it is found that an isotropic consolidation loading or an anisotropic consolidation loading in extension, which causes rotation of principal strain directions, decreases the fabric anisotropy developed during prior K0 consolidation. The initial fabric anisotropy, however, cannot easily be erased or reversed by such a loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anandarajah, A. (1982). “In situ prediction of stress-strain relationships of clays using a bounding surface plasticity model and an electrical method,” PhD thesis, Univ. of California, Davis, Calif.
2.
Anandarajah, A.(1994). “Discrete element method for simulating behavior of cohesive soils.”J. Geotech. Engrg. Div., ASCE, 120(9), 1593–1613.
3.
Anandarajah, A., Arulanandan, K., Dafalias, Y. F., and Herrmann, L. R. (1983). “In situ determination of stress-strain relationship of clays.”Proc., Int. Symp. on Constitutive Laws for Engrg. Mat.: Theory and Applications, Elsevier, New York, N.Y.
4.
Anandarajah, A., and Kuganenthira, N.(1995). “Some aspects of fabric anisotropy of soils.”Géotechnique, London, England, 45(1), 69–81.
5.
Anandarajah, A., Meegoda, N. J., and Arulanandan, K. (1986). “In situ stress-strain prediction of fine grained soils.”Proc., Spec. Conf. on Use of In Situ Testing in Geotech. Engrg., ASCE, New York, N.Y.
6.
Arulanandan, K., and Kutter, B. (1978). “A directional structure index related to sand liquefaction.”Proc., Spec. Conf. on Earthquake Engrg. Soil Dyn., ASCE, New York, N.Y., 213–230.
7.
Banerjee, P. K., Stipho, A. S., and Yosif, N. B. (1984). “A theoretical and experimental investigation of the behavior of anisotropically consolidated clays.”Developments in soil mechanics and foundation engineering, Vol. II, P. K. Banerjee and R. Butterfield, eds., Elsevier Applied Science, London, England, 1–41.
8.
Barden, L., and Sides, G.(1971). “Some disturbance in the investigation of clay structure.”Géotechnique, London, England, 12(3), 211–222.
9.
Cundall, P. A., and Strack, O. D. L.(1979). “A discrete numerical model for granular assemblies.”Géotechnique, 29(1), 47–65.
10.
Dafalias, Y. F., and Arulanandan, K. (1979). “Electrical characterization of transversely isotropic sands.”Archives of Mech., 31(5), Warsaw, Poland, 723–739.
11.
Drescher, A., and De Josselin De Jong, G.(1972). “Photoelastic verification of a mechanical model for the flow of a granular material.”J. Mech. Phys. and Solids, 20, 337–351.
12.
Duncan, J. M., and Seed, H. B.(1966). “Anisotropy and stress reorientation in clay.”J. Soil Mech. and Found. Engrg. Div., ASCE, 92(5), 21–50.
13.
Kirkgard, M. M., and Lade, P. V.(1993). “Anisotropy of normally consolidated San Francisco Bay mud.”Geotech. Testing J., 14(3), 231–240.
14.
Kuganenthira, N., Zhao, D., and Anandarajah, A. (1996). “Measurement of fabric anisotropy during triaxial shearing.”Géotechnique, London, England.
15.
Li, X. S., Chan, C. K., and Shen, C. K. (1988). “An automated triaxial testing system.”Adv. Triaxial Testing of Soil and Rock, STP 977, 95–106.
16.
Martin, R. T., and Ladd, C. C.(1978). “Fabric of consolidated kaolinite.”Clays and Clay Minerals J., 23, 17–25.
17.
Mitchell, R. J.(1972). “Some deviations from isotropy in lightly overconsolidated clay.”Géotechnique, London, England, 22(3), 459–467.
18.
Mousseau, R. J., and Trump, R. P. (1967). “Measurement of electrical anisotropy of clay-like materials.”J. Appl. Phys., (Oct.).
19.
Quigley, R. M., and Thompson, C. D. (1966). “The fabric of anisotropically consolidated sensitive marine clay.”Can. Geotech. J., III(2), 61–73.
20.
Saada, A. S., and Bianchini, G. F. (1975). “Strength of one-dimensionally consolidated clays.”J. Geotech. Engrg. Div., ASCE, 101(11), 1151–64.
21.
Satake, M. (1982). “Fundamental quantities in the graph approach to granular materials.”Proc., U.S./Japan Seminar on New Models and Constitutive Relations in the Mech. of Granular Mat., 9–19, Elsevier, New York, N.Y.
22.
Ting, W. H. (1968). “Some effects of history on the stress-strain behavior of kaolin,” PhD thesis, Univ. of Cambridge, Cambridge, England.
23.
Tovey, N. K. (1971). “A selection of scanning electron micrographs of clays.”Rep. CUED/C-SOILS/TR5a, Dept. of Engrg., Univ. of Cambridge, Cambridge, England.
24.
Tovey, N. K., and Smart, P.(1986). “Intensity gradient techniques for orientation analysis of electron micrographs.”Scanning, 8(2), 75–90.
25.
Unitt, B. M.(1975). “A digital computer method for revealing directional information in images.”J. Phy. E: Sci. Instrum., 8, 423.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Aug 1, 1996
Published in print: Aug 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.