Working Stress Design Method for Reinforced Soil Walls
Publication: Journal of Geotechnical Engineering
Volume 120, Issue 4
Abstract
A method for the internal design of reinforced soil walls based on working stresses is developed and evaluated using measurements from five full‐scale structures containing a range of reinforcement types. It is shown that, in general, the stiffer the reinforcement system and the higher the stresses induced during compaction, the higher are the tensile stresses that must be resisted by the reinforcements. Unique features of this method, compared to currently used reinforced soil wall design methods, are that it can be applied to all types of reinforcement systems, reinforcement and soil stiffness properties are considered, and backfill compaction stresses are taken explicitly into account. The method can be applied either analytically or using design charts. A design example is included.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adib, M. E. (1988). “Internal lateral earth pressure in earth walls,” PhD thesis, University of California, Berkeley, Calif.
2.
Adib, M. E., and Mitchell, J. K. (1991). “Lateral earth pressure in reinforced soil walls.” J. Geotech. Engrg.
3.
Al‐Hussaini, M. M., and Johnson, L. D. (1978). “Numerical analysis of reinforced earth wall.” Proc., ASCE Symp. on Earth Reinforcement, ASCE, New York, N.Y., 98–126.
4.
Al‐Hussaini, M. M., and Perry, E. B. (1978). “Field experiment of reinforced earth wall.” Proc., ASCE Symp. on Earth Reinforcement, ASCE, New York, N.Y., 127–156.
5.
Al‐Yassin, Z. A. (1983). “VSL retained earth—Hayward test results.” Rep. to the VSL Corp.
6.
Anderson, L. R., Sharp, K. D., and Harding, O. T. (1987). “Performance of a 50‐foot high welded wire wall.” Soil improvement—a ten year update; Geotech. Spec. Publ. No. 12, J. P. Welsh, ed., ASCE, 280–308.
7.
Belloti, R., Ghionna, V., and Jamiolkowski, M. (1983). “ relationships in soil.” J. Geotech. Engrg., ASCE, 109(6), 859–861.
8.
Campanella, R. G., and Vaid, Y. P. (1972). “A simple triaxial cell.” Can. Geotech. J., 9(3), 249–260.
9.
Christopher, B. R., Giroud, J. P., Juran, I., Mitchell, J. K., Schlosser, F., and Dunnicliff, J. (1990). “Reinforced soil structures, volume I. Design and construction guidelines.” Federal Hwy. Administration Rep. No. FHWA/RD/89‐043, Washington, D.C.
10.
Duncan, J. M., Byrne, P., Wong, K. S., and Mabry, P. (1980). “Strength, stress‐strain and bulk modulus parameters for finite element analyses of stresses and movements in soil masses.” Geotech. Engrg. Res. Rep. No. UCB/GT/80‐01, University of California, Berkeley, Calif.
11.
Duncan, J. M., and Seed, R. B. (1986). “Compaction‐induced earth pressures under .” J. Geotech. Engrg., ASCE, 112(1), 1–22.
12.
Dyer, N. R., and Milligan, G. W. E. (1984). “A photoelastic investigation of the interaction of a cohesionless soil with reinforcement placed at different orientations.” Proc., Int. Conf. on In Situ Soil and Rock Reinforcement, 257–262.
13.
Finlay, T. W., and Sutherland, H. B. (1977). “Field measurements on a reinforced earth wall at granton.” Proc., 9th Int. Conf. on Soil Mech. and Found. Engrg., Tokyo, Japan, I, 511–516.
14.
Jaky, J. (1944). “The coefficient of earth pressure at rest.” J. Soc. of Hungarian Archits. and Engrs.
15.
Jewell, R. A. (1980). “Some effects of reinforcement on the mechanical behavior of soils,” PhD thesis, Univ. of Cambridge, Cambridge, England.
16.
Juran, I., and Schlosser, F. (1978). “Theoretical analysis of failure in Reinforced Earth structures.” Proc., ASCE Symp. on Earth Reinforcement, ASCE, New York, N.Y., 528–555.
17.
Meyerhof, G. G. (1955). “The bearing capacity of foundations under eccentric and inclined loads.” Proc., 3rd Int. Conf. on Soil Mech. and Found. Engrg., Zurich, Switzerland, I, 440–445.
18.
Mitchell, J. K., and Villet, W. C. B. (1987). “Reinforcement of earth slopes and embankments.” NCHRP Rep. No. 290, Transportation Research Board, Washington, D.C.
19.
Mitchell, J. K. (1987). “Reinforcement for earthwork construction and ground stabilization.” Proc., 8th Pan Am. Conf. on Soil Mech. and Found. Engrg., Cartagena, Venezuela, 16–21.
20.
Schmidt, B. (1967). “Lateral stresses in uniaxial strain.” Bull. No. 23, The Danish Geotech. Inst., Copenhagen, Denmark, 5–12.
21.
Seed, R. B., Collin, J. G., and Mitchell, J. K. (1986). “FE analyses of compacted reinforced soil walls.” Proc., 2nd Int. Conf. on Numerical Models in Geomech., Ghent, Belgium, 553–562.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Feb 7, 1990
Published online: Apr 1, 1994
Published in print: Apr 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.