Significant Parameters in Elastoplastic Analysis of Underground Openings
Publication: Journal of Geotechnical Engineering
Volume 119, Issue 3
Abstract
In this paper we show how it is possible to reduce the number of significant parameters appearing in typical rock mechanics boundary value problems of rock engineering and tunneling. Further, we present methods to gain information concerning the solutions to these problems, presuming the rock mass obeys the well‐known, and in geomechanics widely used, Mohr‐Coulomb yield criterion. The system of differential equations that governs boundary value problems with a Mohr‐Coulomb elastoplastic material can be reformulated by means of simple substitutions in such a way that cohesion and Young's modulus do not explicitly appear. This makes substantial savings of computational effort possible, and contributes to a better understanding of the structure of the solution. Computational results obtained for some values of Young's modulus, cohesion, initial stresses, and boundary tractions can easily be transformed to the results for other values. The transformed equations suggest very clearly the influence of cohesion, i.e., as compared to the effect of a support pressure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anagnostou, G. (1991). “Untersuchungen zur Statik des Tunnelbaus in quellfähigem Gebirge.” ETH‐Dissertation 9553, Swiss Federal Inst. of Tech., Zurich, Switzerland (in German).
2.
Brown, E. T., Bray, J. W., Ladanyi, B., and Hoek, E. (1983). “Ground response curves for rock tunnels.” J. Geotech. Engrg., ASCE, 109(1), 15–39.
3.
Caquot, A. (1934). Equilibre des massif s a frottement interne. Gauthier‐Villars, Paris, France.
4.
Detournay, E. (1983). “Two‐dimensional elastoplastic analysis of a deep cylindrical tunnel under non‐hydrostatic loading,” PhD thesis, Univ. of Minnesota, Minneapolis, Minn.
5.
Detournay, E. (1986). “Elastoplastic model of a deep tunnel for a rock with variable dilatancy.” Rock Mech. Rock Engrg., 19(2), 99–108.
6.
Detournay, E., and Fairhurst, C. (1987). “A two‐dimensional elastoplastic analysis of a long cylindrical cavity under non‐hydrostatic loading.” Int. J. Rock Mech. Mining Sci., 24(4), 197–211.
7.
Fritz, P. (1981). “Numerische Erfassung rheologischer Probleme in der Felsmechanik.” Mitteilung Nr. 47 des Institutes für Strassen‐, Eisenbahn und Felsbau, Swiss Federal Inst. of Tech., Zurich, Switzerland (in German).
8.
Goertler, H. (1975). Dimensionsanalyse. Springer, Berlin, Germany (in German).
9.
Kovari, K. (1977). “The elasto‐plastic analysis in the design practice of underground openings.” Finite elements in geomechanics, G. Gudehus, ed., Wiley, London, England.
10.
Kovari, K. (1986). “Rock deformation problems when using full‐facing cutting equipment in rock, Part 1.” Tunnel, 3, 236–244.
11.
Kovari, K. (1986). “Rock deformation problems when using full‐facing cutting equipment in rock, Part 2.” Tunnel, 4, 289–298.
12.
Kovari, K. (1986). “The determination of the characteristic line from straight line nomogramms.” Proc. 5th Int. Conf. on Numerical Methods in Geomechanics, Balkema, Rotterdam, the Netherlands, 1741–1746.
13.
Pande, G. N., Beer, G., and Williams, J. R. (1990). Numerical methods in rock mechanics. Wiley, Chichester, England.
14.
Zienkiewicz, O. C. (1971). The finite element method in engineering science. McGraw‐Hill, London, England.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Apr 16, 1992
Published online: Mar 1, 1993
Published in print: Mar 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.