Rational Polynomial Technique in lope‐Reliability Analysis
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical Engineering
Volume 119, Issue 12
Abstract
This paper is concerned with the application of a numerical technique, known as the rational polynomial approximation, to the first‐order second‐moment method for calculating statistical moments of a performance function in reliability analysis. The approach is used for slope reliability analysis within the framework of limit equilibrium considering two recognized methods of analysis (i.e. the 1965 generalized procedure of slices of Morgenstein and Price and the 1979 Sarma method). It is shown that the rational polynomial technique works well for the first‐order second‐moment method of slope reliability analysis based on two rigorous methods of limit equilibrium involving nonexplicit performance functions. The calculation can always be made with confidence whether the performance function is explicit or inexplicit, linear or nonlinear. Two illustrative examples are presented in this paper: one for a homogeneous slope and the other for a slope in layered soil. The results for the reliability index are compared with two other methods, the point‐estimate method and Monte Carlo simulation method. In the past, such comparisons have generally been made only for slope‐stability models involving explicit performance functions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alonso, E. E. (1976). “Risk analysis of slopes and its application to slopes in Canadian sensitive clays.” Géotechnique, London, England, 26, 453–482.
2.
Chowdhury, R. N., and A‐Grivas, D. (1982). “Probabilistic model of progressive failure of slopes.” J. Geotech. Engrg. Div., ASCE, 108(6), 803–819.
3.
Chowdhury, R. N., Tang, W. H., and Sidi, I. (1987). “Reliability model of progressive slope failure.” Géotechnique, 37(4), 467–481.
4.
Chowdhury, R. N., and Zhang, S. (1989). “Bayesian updating for open pit slopes.” Proc., 2nd Large Open Pit Conf., Australasian Institute of Mining and Metallurgy, Latrobe Valley, Victoria, Australia, 9–13.
5.
Felio, G. Y., Lytton, R. L., and Briaud, J. L. (1984). “Statistical approach to Bishop's Method of Slices.” Proc., Int. Symp. on Landslides, 2, 411–415.
6.
Fredlund, D. G., and Krahn, J. (1976). “Comparison of slope stability methods of analysis.” Proc., 29th Can. Geotech. Conf.—Slope Stability. Canadian Geotechnical Society, VIII, 57–74.
7.
Hoeg, K., and Murarka, R. P. (1974). “Probabilistic analysis and design of a retaining wall.” J. Geotech. Div., ASCE, 100(3), 349–366.
8.
Lau, W. K., and Kuroda, K. (1986). “Reliability of axial pile capacity in noncalcareous sand.” Res. Rep. No. 86‐PT‐03, School of Civ. Engrg., Kyoto Univ., Kyoto, Japan.
9.
Li, K. S., and White, W. (1987a). “Probabilistic approaches to slopes design.” Res. Rep., No. 20, University College, ADFA, Univ. of New South Wales, Australia.
10.
Li, K. S., and White, W. (1987b). “Rapid evaluation of the critical slip surface in slope stability problems.” Int. J. for Numeric. and Anal. Meth. in Geomech., 11, 449–473.
11.
Major, G., Ross‐Brown, D., and Kim, H. S. (1977). “A general probabilistic analysis for three‐dimensional wedge failure.” Proc., 19th U.S. Mech. Symp., 45–56.
12.
Morgenstern, N. R., and Price, V. E. (1965). “The analysis of stability of general slip surfaces.” Géotechnique, London, England, 15(1), 79–93.
13.
Nguyen, V. U., and Chowdhury, R. N. (1984). “Probabilistic study of spoil pile stability in strip coal mines—two techniques compared.” Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 21(6), 303–312.
14.
Nguyen, V. U., and Chowdhury, R. N. (1985). “Simulation for risk analysis with correlated variables.” Géotechnique, 35(1), 47–58.
15.
Rosenblueth, E. (1975). “Point estimates for probability moments” Proc., Nat. Acad. Sci. USA, 72(10), 3812–3814.
16.
Sarma, S. K. (1979). “Stability analysis of embankments and slopes.” J. Geotech. Div., ASCE, 105(12), 1511–1524.
17.
Tobutt, D. C., and Richards, E. A. (1979). “The reliability of earth slopes.” Int. J. for Numer. and Anal. Methods in Geomech., 3, 323–353.
18.
Tobutt, D. C. (1982). “Monte Carlo simulation for slope stability.” Comp. and Geosci., 8(2), 199–208.
19.
Wolff, T. F. (1985). “Analysis and design of embankment dam slopes: a probabilistic approach,” PhD thesis, Purdue Univ., West Lafayette, Ind.
20.
Zhang, S. (1990). “Evaluation and updating of slope reliability,” PhD thesis, Dept. of Civil and Mining Engrg., Univ. of Wollongong, Wollongong, New South Wales, Australia.
21.
Zhou, H. (1982). New calculation methods in optimum design, Xin Shi Dai Chubanshe, Hong Kong (in Chinese).
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Oct 23, 1990
Published online: Dec 1, 1993
Published in print: Dec 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.