Deformation‐Based Model for Reinforced Sand
Publication: Journal of Geotechnical Engineering
Volume 116, Issue 7
Abstract
A closed‐form solution for determining the development of tension in soil reinforcements is incorporated in a rigid‐plastic soil model. The model accounts for the plastic work to deform the soil and the elastic work to deform the reinforcements in tension and bending. The model is used to evaluate experimental results obtained in large‐scale direct‐shear tests. The results show that the mobilization of tension in the reinforcements is a function of the reinforcement properties and the deformation characteristics of the reinforced soil. The reinforcement properties affect the width of the shear zone and the increase in the strength of the reinforced soil is not linearly proportional to the reinforcement concentration. The contribution of reinforcement tensile stresses to the increased strength of the reinforced soil is as much as one order of magnitude greater than the bending stresses. Thus, the use of limit equilibrium methods for analysis of reinforced structures, ignoring the bending moment contribution, is recommended.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Duncan, J. M., Low, B. K., and Schaefer, V. R. (1985). STABGM: A computer program for slope stability analysis of reinforced embankments and slopes. Dept. of Civ. Engrg., Virginia Tech, Blacksburg, Va.
2.
Gray, D. H., and Ohashi, H. (1983). “Mechanics of fiber reinforcements in sand.” J. Geotech. Engrg., ASCE, 108(3), 335–353.
3.
Jewell, R. A. (1980). “Some effects of reinforcement on the mechanical behavior of soils,” thesis presented to Cambridge University, at Cambridge, England, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
4.
Jewell, R. A., and Wroth, C. P. (1987). “Direct shear tests on reinforced sand.” Geotechnique, 37(1), 53–68.
5.
Jewell, R. A., and Greenwood, J. H. (1988). “Long term strength and safety in steep soil slopes reinforced by polymer materials.” Report No. OUEL 1725/88 (Soil Mech. Report No. 083/88), Dept. of Engrg. Sci., Univ. of Oxford, Oxford, England.
6.
Juran, I., Schlosser, F., Louis, C., Kernoa, M., and Eckmann, B. (1981). “Le Reinforcement des Sols par Barres Passives.” Proc. 10th Int. Conf. on Soil Mech. and Found. Engrg., Stockholm, Sweden, 713‐716 (in French).
7.
Juran, I., Shaffiee, S., Schlosser, F., Humbert, P., and Guenot, A. (1982). “Study of soil‐bar interaction in the technique of soil nailing.” Eighth European Conf. on Soil Mech. and Found. Engrg., 513–516.
8.
Juran, I., Ider, M. H., Chen, C. L., and Guermazi, A. (1988). “Numerical analysis of the response of reinforced soils to direct shearing: Part 2.” Int. J. Numer. Methods in Geomech., 12(2), 157–171.
9.
Shewbridge, S. E. (1987). “The influence of reinforcement properties on the strength and deformation characteristics of a reinforced sand,” thesis presented to the University of California, at Berkeley, Calif., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
10.
Shewbridge, S. E., and Sitar, N. (1985). “The influence of fiber properties on the deformation characteristics of fiber‐soil composite.” Geotech. Engrg. Report No. UCB/GT/85‐02, Univ. of California, Berkeley, Calif.
11.
Shewbridge, S. E., and Sitar, N. (1989). “Deformation characteristics of reinforced sand in direct shear.” J. Geotech. Engrg., ASCE, 115(8), 1134–1147.
12.
Waldron, L. J. (1977). “The shear resistance of root‐permeated homogeneous and stratified soil.” Soil Sci. Soc. of America J., 41(3), 843–849.
13.
Wu, T. H., McOmber, R. M., Erb, R. T., and Beal, P. E. (1988). “Study of soil‐root interaction.” J. Geotech. Engrg., ASCE, 114(12), 1351–1375.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jul 1, 1990
Published in print: Jul 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.