Failure Criteria Interpretation Based on Mohr‐Coulomb Friction
Publication: Journal of Geotechnical Engineering
Volume 116, Issue 6
Abstract
The use of numerical methods such as finite elements to make accurate predictions of failure or collapse of geomaterials must utilize a suitable failure criterion that is able to represent the shear strength for all stress paths likely to be encountered. The best‐known failure criterion is that of Mohr‐Coulomb, but several others have been proposed. Using a dimensionless form of principal stress space, this paper reviews some of these other criteria in a unified way by presenting them in terms of the equivalent Mohr‐Coulomb friction angle implied at various locations on their periphery. Circular conical surfaces in stress space can greatly overestimate the strength of soil for certain stress paths, and sometimes contain singularities as implied by an equivalent friction angle of 90°. Noncircular conical surfaces have also been considered. These give a more acceptable range of equivalent friction angles, as they are based on actual test data. These “sophisticated” criteria can still predict equivalent friction angles that differ from each other by several degrees, however.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bishop, A. W. (1966). “The strength of soils as engineering materials: 6th Rankine lecture.” Géotechnique, 16(2), 91–130.
2.
Drucker, D. C., Gibson, R. E., and Henkel, D. J. (1957). “Soil mechanics and work‐hardening theories of plasticity.” Trans. of the American Society of Civil Engineers, 122, 338–346.
3.
Drucker, D. C., and Prager, W. (1952). “Soil mechanics and plastic analysis in limit design.” Quart. Appl. Mech., 10, 157–165.
4.
Griffiths, D. V. (1986). “Some theoretical observations on conical failure criteria in principal stress space.” Int. J. Solids Struct., 22(5), 553–565.
5.
Griffiths, D. V., and Prevost, J. H. (1988). “The properties of anisotropic conical failure surfaces in relation to the Mohr‐Coulomb criterion.” Int. J. Numer. Anal. Methods Geomech., 12(5), 497–504.
6.
Humpheson, C. (1976). “Finite element analysis of elasto/viscoplastic soils,” thesis presented to the University of Wales, at Swansea, Wales, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
7.
Lade, P. V., and Duncan, J. M. (1975). “Elasto‐plastic stress‐strain theory for cohesionless soils.” Proc., American Society of Civil Engineers, 101(10), 1037–1053.
8.
Lambe, T. W., and Whitman, R. V. (1969). “Soil Mechanics,” John Wiley and Sons, New York, N.Y., 206.
9.
Matsuoka, H., and Nakai, T. (1974). “Stress‐deformation and strength characteristics of soil under three different principal stresses.” Proc., Japanese Society of Civil Engineers, 232, 59–70.
10.
Mroz, A. (1967). “On the description of anisotropic work hardening.” J. Mech. Phys. Sci., 15, 163–175.
11.
Prevost, J. H. “A simple plasticity theory for frictional cohesionless soils.” Soil Dyn. Earthquake Engrg., 4(1), 9–17.
12.
Smith, I. M. (1988). “Two ‘class A’ predictions of offshore foundation performance,” G. Swoboda, ed., Proc. 6th Int. Conf. on Numerical Methods in Geomechanics, A. A. Balkema, Rotterdam, The Netherlands, 137–144.
13.
Smith, I. M., and Griffiths, D. V. (1988). Programming the Finite Element Method. 2nd Ed., John Wiley and Sons, New York, N.Y.
14.
Vermeer, P. A. (1978). “A double hardening model for sand.” Geotechnique, 28(4), 413–433.
15.
Zienkiewicz, O. C., et al. (1978). “A unified approach to the soil mechanics of offshore foundations,” Numerical methods in offshore engineering, John Wiley and Sons, New York, N.Y., 361–412.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jun 1, 1990
Published in print: Jun 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.