TECHNICAL PAPERS
Oct 1, 1990

Dynamic Replacement and Mixing of Organic Soils with Sand Charges

Publication: Journal of Geotechnical Engineering
Volume 116, Issue 10

Abstract

Field trials were initiated to investigate the feasibility of minimizing secondary as well as enforcing primary compression of peaty clays by dynamic replacement and mixing (DRM) with sand charges using conventional heavy tamping plant. Laboratory model tests were also conducted to amplify the field findings. The investigations have shown that DRM can transform in situ peaty clay deposits into an upper sand raft with pockets of peaty sand underlain by a fairly uniform layer of mixed sand and peat, where both sublayers have relatively insignificant secondary compression characteristics. Furthermore, for practical purposes, unique relationships may be established between degree of improvement of peaty clay after treatment (in terms of primary and secondary compression properties) and sand‐charge‐to‐compressible‐soil ratio s. Similar relations may be formulated between s and an operational factor il, incorporating initial soil consistency and energy‐application parameters used in standard practice. By means of these characteristic relationships, overall operational requirements of a tamping scheme to achieve a desired degree of ground improvement may, in principle, be determined prior to field application.

Get full access to this article

View all available purchase options and get full access to this article.

References

1.
Aziz, M. A., et al. (1980). “Treatment of peaty soils.” Proc., Sixth Southeast Asian Conf. on Soil Engrg., Southeast Asian Society of Soil engineering, 431–446.
2.
Casagrande, A. (1936). “The determination of preconsolidation load and its practical significance.” Proc., First Int. Conf. on Soil Mech., Harvard University and International Society for Soil Mechanics and Foundation Engineering, Cambridge, Mass., 3, 60–64.
3.
Charles, J. A., Burford, D., and Watts, K. S. (1981). “Field studies of the effectiveness of dynamic consolidation.” Proc., 10th Int. Conf. Soil Mech. and Found. Engrg., 3, International Society for Soil Mechanics and Foundation Engineering, 617–622.
4.
Head, K. H. (1982). Manual of soil laboratory testing. Vol. 2, Pentech Press, London, United Kingdom.
5.
Lee, S. L., and Lo, K. W. (1985). “Ground improvement by dynamic replacement and mixing—Special lecture.” Proc., Third NTI Int. Geotech. Sem., Nanyang Technological Institute, 19–30.
6.
Lo, K. W., Ooi, P. L., and Lee, S. L. (1990). “A unified approach to ground improvement by heavy tamping.” J. Geotech. Engrg. Div., ASCE, 116(3), 514–527.
7.
Priebe, H. J. (1976). “Abschatzung des Setzungsverhaltens eines durch Stopfver‐dichtung verbesserten Baugrundes.” Die Bautechnik, 53(5), 160–162(in German).
8.
Ramaswamy, S. D., et al. (1979). “Treatment of peaty clay by high energy impact.” J. Geotech. Engrg. Div., ASCE, 105(8), 957–967.
9.
Tan, S. B. (1971). “An empirical method for estimating secondary and total settlement.” Proc., Fourth Asian Reg. Conf. Soil Mech. and Found. Engrg., Southeast Asian Society of Soil Engineering, 2, 147–151.
10.
Williams, A. G. (1982). Geotechnics level IV. Van Nostrand Reinhold, New York, N.Y.

Information & Authors

Information

Published In

Go to Journal of Geotechnical Engineering
Journal of Geotechnical Engineering
Volume 116Issue 10October 1990
Pages: 1463 - 1482

History

Published online: Oct 1, 1990
Published in print: Oct 1990

Permissions

Request permissions for this article.

Authors

Affiliations

Kwang Wei Lo
Sr. Lect., Dept. of Civ. Engrg., Nat. Univ. of Singapore, 10 Kent Ridge Crescent, Singapore 0511
Peng Lee Ooi
Lect., Educational and Staff Development Dept., Singapore Polytech., 500 Dover Road, Singapore 0511; formerly, Res. Student, Dept. of Civ. Engrg., Nat. Univ. of Singapore
Seng‐Lip Lee, Fellow, ASCE
Prof., Dept. of Civ. Engrg., Nat. Univ. of Singapore, 10 Kent Ridge Crescent, Singapore 0511

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share