Boundary‐Element Analysis for Unconfined Seepage Problems
Publication: Journal of Geotechnical Engineering
Volume 114, Issue 5
Abstract
A boundary‐element solution procedure is illustrated and applied to the analyses of both steady‐state and non‐steady‐state unconfined seepage problems. These analyses are performed for a laboratory model and prototype earth dams to determine the position of the free surface in a steady‐state condition, as well as the movement of the free surface in a transient condition resulting from drawdown of the water level in a reservoir. Applicability of this method is evaluated based on comparisons between the numerical solutions and measured laboratory and field data.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Banerjee, P. K., and Butterfield, R. (1981). Boundary element methods in engineering science. McGraw Hill Book Co. Ltd., New York, N.Y.
2.
Bear, J. (1972). Dynamics of fluids in porous media. American Elsevier, New York, N.Y.
3.
Brebbia, C. A. (1978). The boundary element method for engineers. Pentech Press Limited, Plymouth Devon, England.
4.
Chang, C. S. (1981). “Boundary element method in seepage analysis with a free surface.” Proceedings of Implementation of Computer Procedures and Stress‐Strain Laws in Geotechnical Engineering, Chicago, Ill., 421–431.
5.
Chang, C. S. (1986). “Application of boundary element method in transient flow problems with moving boundaries.” Proc. 8th International Conference on Boundary Element Methods in Engineering, Tokyo, Japan.
6.
Desai, C. S. (1972). “Seepage analysis of earth banks under draw down.” J. Soil Mech. and Found. Div., ASCE, 98(1), 1143–1162.
7.
Kamiya, M., et al. (1985). “Seepage flow of facing type dam in model test.” J. Soils and Found., Japanese Society of Soil Mechanics and Foundation Engineering, 33(9), 47–50, (in Japanese).
8.
Kellogg, F. H. (1941). “Investigation of drainage rates affecting stability of earth dams.” Trans., ASCE, Vol. 113, 1261–1309.
9.
Kirkham, D., and Gaskell, R. E. (1951). “The falling water table in tile and ditch drainage.” Proceedings, Soil Science Soc. of America, Vol. 15, 37–42.
10.
Liggett, J. A. (1977). “Location of free surface in porous media.” J. Hydr. Div., ASCE, 103(4), 353–365.
11.
Liggett, J. A., and Liu, P. L. (1983). The boundary integral equation method for porous media flow. George Allen & Unwin Ltd, Boston, Mass.
12.
Liggett, J. A., and Liu, P. L. (1984). “Applications of boundary element methods to fluid mechanics.” Topics in Boundary Element Research, C. A. Brebbia, ed., Vol. 1, Springer‐Verlag, New York, N.Y., 78–96.
13.
Neuman, S. P., and Witherspoon, P. A. (1971). “Analysis of nonsteady flow with a free surface using the finite element method.” J. Water Resour. Res., 7(3), 611–623.
14.
Niwa, Y., Kobayashi, S., and Fukui, T. (1974). “An application of the integral equation method to seepage problems.” Theoretical and Applied Mechanics, Vol. 24, Proceedings of the 24th Japan National Congress for Applied Mechanics, 479–486.
15.
Taylor, R. L., and Brown, C. B. (1967). “Darcy's flow solutions with a free surface.” J. Hydr. Div., ASCE, 93(2), 25–34.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: May 1, 1988
Published in print: May 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.